| /* |
| * (C) Copyright 2000-2009 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <bootm.h> |
| #include <fdt_support.h> |
| #include <libfdt.h> |
| #include <malloc.h> |
| #include <vxworks.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static int do_bootm_standalone(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| char *s; |
| int (*appl)(int, char *const[]); |
| |
| /* Don't start if "autostart" is set to "no" */ |
| s = getenv("autostart"); |
| if ((s != NULL) && !strcmp(s, "no")) { |
| setenv_hex("filesize", images->os.image_len); |
| return 0; |
| } |
| appl = (int (*)(int, char * const []))images->ep; |
| appl(argc, argv); |
| return 0; |
| } |
| |
| /*******************************************************************/ |
| /* OS booting routines */ |
| /*******************************************************************/ |
| |
| #if defined(CONFIG_BOOTM_NETBSD) || defined(CONFIG_BOOTM_PLAN9) |
| static void copy_args(char *dest, int argc, char * const argv[], char delim) |
| { |
| int i; |
| |
| for (i = 0; i < argc; i++) { |
| if (i > 0) |
| *dest++ = delim; |
| strcpy(dest, argv[i]); |
| dest += strlen(argv[i]); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_BOOTM_NETBSD |
| static int do_bootm_netbsd(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| void (*loader)(bd_t *, image_header_t *, char *, char *); |
| image_header_t *os_hdr, *hdr; |
| ulong kernel_data, kernel_len; |
| char *consdev; |
| char *cmdline; |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("NetBSD"); |
| return 1; |
| } |
| #endif |
| hdr = images->legacy_hdr_os; |
| |
| /* |
| * Booting a (NetBSD) kernel image |
| * |
| * This process is pretty similar to a standalone application: |
| * The (first part of an multi-) image must be a stage-2 loader, |
| * which in turn is responsible for loading & invoking the actual |
| * kernel. The only differences are the parameters being passed: |
| * besides the board info strucure, the loader expects a command |
| * line, the name of the console device, and (optionally) the |
| * address of the original image header. |
| */ |
| os_hdr = NULL; |
| if (image_check_type(&images->legacy_hdr_os_copy, IH_TYPE_MULTI)) { |
| image_multi_getimg(hdr, 1, &kernel_data, &kernel_len); |
| if (kernel_len) |
| os_hdr = hdr; |
| } |
| |
| consdev = ""; |
| #if defined(CONFIG_8xx_CONS_SMC1) |
| consdev = "smc1"; |
| #elif defined(CONFIG_8xx_CONS_SMC2) |
| consdev = "smc2"; |
| #elif defined(CONFIG_8xx_CONS_SCC2) |
| consdev = "scc2"; |
| #elif defined(CONFIG_8xx_CONS_SCC3) |
| consdev = "scc3"; |
| #endif |
| |
| if (argc > 0) { |
| ulong len; |
| int i; |
| |
| for (i = 0, len = 0; i < argc; i += 1) |
| len += strlen(argv[i]) + 1; |
| cmdline = malloc(len); |
| copy_args(cmdline, argc, argv, ' '); |
| } else { |
| cmdline = getenv("bootargs"); |
| if (cmdline == NULL) |
| cmdline = ""; |
| } |
| |
| loader = (void (*)(bd_t *, image_header_t *, char *, char *))images->ep; |
| |
| printf("## Transferring control to NetBSD stage-2 loader (at address %08lx) ...\n", |
| (ulong)loader); |
| |
| bootstage_mark(BOOTSTAGE_ID_RUN_OS); |
| |
| /* |
| * NetBSD Stage-2 Loader Parameters: |
| * arg[0]: pointer to board info data |
| * arg[1]: image load address |
| * arg[2]: char pointer to the console device to use |
| * arg[3]: char pointer to the boot arguments |
| */ |
| (*loader)(gd->bd, os_hdr, consdev, cmdline); |
| |
| return 1; |
| } |
| #endif /* CONFIG_BOOTM_NETBSD*/ |
| |
| #ifdef CONFIG_LYNXKDI |
| static int do_bootm_lynxkdi(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| image_header_t *hdr = &images->legacy_hdr_os_copy; |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("Lynx"); |
| return 1; |
| } |
| #endif |
| |
| lynxkdi_boot((image_header_t *)hdr); |
| |
| return 1; |
| } |
| #endif /* CONFIG_LYNXKDI */ |
| |
| #ifdef CONFIG_BOOTM_RTEMS |
| static int do_bootm_rtems(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| void (*entry_point)(bd_t *); |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("RTEMS"); |
| return 1; |
| } |
| #endif |
| |
| entry_point = (void (*)(bd_t *))images->ep; |
| |
| printf("## Transferring control to RTEMS (at address %08lx) ...\n", |
| (ulong)entry_point); |
| |
| bootstage_mark(BOOTSTAGE_ID_RUN_OS); |
| |
| /* |
| * RTEMS Parameters: |
| * r3: ptr to board info data |
| */ |
| (*entry_point)(gd->bd); |
| |
| return 1; |
| } |
| #endif /* CONFIG_BOOTM_RTEMS */ |
| |
| #if defined(CONFIG_BOOTM_OSE) |
| static int do_bootm_ose(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| void (*entry_point)(void); |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("OSE"); |
| return 1; |
| } |
| #endif |
| |
| entry_point = (void (*)(void))images->ep; |
| |
| printf("## Transferring control to OSE (at address %08lx) ...\n", |
| (ulong)entry_point); |
| |
| bootstage_mark(BOOTSTAGE_ID_RUN_OS); |
| |
| /* |
| * OSE Parameters: |
| * None |
| */ |
| (*entry_point)(); |
| |
| return 1; |
| } |
| #endif /* CONFIG_BOOTM_OSE */ |
| |
| #if defined(CONFIG_BOOTM_PLAN9) |
| static int do_bootm_plan9(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| void (*entry_point)(void); |
| char *s; |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("Plan 9"); |
| return 1; |
| } |
| #endif |
| |
| /* See README.plan9 */ |
| s = getenv("confaddr"); |
| if (s != NULL) { |
| char *confaddr = (char *)simple_strtoul(s, NULL, 16); |
| |
| if (argc > 0) { |
| copy_args(confaddr, argc, argv, '\n'); |
| } else { |
| s = getenv("bootargs"); |
| if (s != NULL) |
| strcpy(confaddr, s); |
| } |
| } |
| |
| entry_point = (void (*)(void))images->ep; |
| |
| printf("## Transferring control to Plan 9 (at address %08lx) ...\n", |
| (ulong)entry_point); |
| |
| bootstage_mark(BOOTSTAGE_ID_RUN_OS); |
| |
| /* |
| * Plan 9 Parameters: |
| * None |
| */ |
| (*entry_point)(); |
| |
| return 1; |
| } |
| #endif /* CONFIG_BOOTM_PLAN9 */ |
| |
| #if defined(CONFIG_BOOTM_VXWORKS) && \ |
| (defined(CONFIG_PPC) || defined(CONFIG_ARM)) |
| |
| void do_bootvx_fdt(bootm_headers_t *images) |
| { |
| #if defined(CONFIG_OF_LIBFDT) |
| int ret; |
| char *bootline; |
| ulong of_size = images->ft_len; |
| char **of_flat_tree = &images->ft_addr; |
| struct lmb *lmb = &images->lmb; |
| |
| if (*of_flat_tree) { |
| boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); |
| |
| ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); |
| if (ret) |
| return; |
| |
| ret = fdt_add_subnode(*of_flat_tree, 0, "chosen"); |
| if ((ret >= 0 || ret == -FDT_ERR_EXISTS)) { |
| bootline = getenv("bootargs"); |
| if (bootline) { |
| ret = fdt_find_and_setprop(*of_flat_tree, |
| "/chosen", "bootargs", |
| bootline, |
| strlen(bootline) + 1, 1); |
| if (ret < 0) { |
| printf("## ERROR: %s : %s\n", __func__, |
| fdt_strerror(ret)); |
| return; |
| } |
| } |
| } else { |
| printf("## ERROR: %s : %s\n", __func__, |
| fdt_strerror(ret)); |
| return; |
| } |
| } |
| #endif |
| |
| boot_prep_vxworks(images); |
| |
| bootstage_mark(BOOTSTAGE_ID_RUN_OS); |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| printf("## Starting vxWorks at 0x%08lx, device tree at 0x%08lx ...\n", |
| (ulong)images->ep, (ulong)*of_flat_tree); |
| #else |
| printf("## Starting vxWorks at 0x%08lx\n", (ulong)images->ep); |
| #endif |
| |
| boot_jump_vxworks(images); |
| |
| puts("## vxWorks terminated\n"); |
| } |
| |
| static int do_bootm_vxworks(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("VxWorks"); |
| return 1; |
| } |
| #endif |
| |
| do_bootvx_fdt(images); |
| |
| return 1; |
| } |
| #endif |
| |
| #if defined(CONFIG_CMD_ELF) |
| static int do_bootm_qnxelf(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| char *local_args[2]; |
| char str[16]; |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("QNX"); |
| return 1; |
| } |
| #endif |
| |
| sprintf(str, "%lx", images->ep); /* write entry-point into string */ |
| local_args[0] = argv[0]; |
| local_args[1] = str; /* and provide it via the arguments */ |
| do_bootelf(NULL, 0, 2, local_args); |
| |
| return 1; |
| } |
| #endif |
| |
| #ifdef CONFIG_INTEGRITY |
| static int do_bootm_integrity(int flag, int argc, char * const argv[], |
| bootm_headers_t *images) |
| { |
| void (*entry_point)(void); |
| |
| if (flag != BOOTM_STATE_OS_GO) |
| return 0; |
| |
| #if defined(CONFIG_FIT) |
| if (!images->legacy_hdr_valid) { |
| fit_unsupported_reset("INTEGRITY"); |
| return 1; |
| } |
| #endif |
| |
| entry_point = (void (*)(void))images->ep; |
| |
| printf("## Transferring control to INTEGRITY (at address %08lx) ...\n", |
| (ulong)entry_point); |
| |
| bootstage_mark(BOOTSTAGE_ID_RUN_OS); |
| |
| /* |
| * INTEGRITY Parameters: |
| * None |
| */ |
| (*entry_point)(); |
| |
| return 1; |
| } |
| #endif |
| |
| static boot_os_fn *boot_os[] = { |
| [IH_OS_U_BOOT] = do_bootm_standalone, |
| #ifdef CONFIG_BOOTM_LINUX |
| [IH_OS_LINUX] = do_bootm_linux, |
| #endif |
| #ifdef CONFIG_BOOTM_NETBSD |
| [IH_OS_NETBSD] = do_bootm_netbsd, |
| #endif |
| #ifdef CONFIG_LYNXKDI |
| [IH_OS_LYNXOS] = do_bootm_lynxkdi, |
| #endif |
| #ifdef CONFIG_BOOTM_RTEMS |
| [IH_OS_RTEMS] = do_bootm_rtems, |
| #endif |
| #if defined(CONFIG_BOOTM_OSE) |
| [IH_OS_OSE] = do_bootm_ose, |
| #endif |
| #if defined(CONFIG_BOOTM_PLAN9) |
| [IH_OS_PLAN9] = do_bootm_plan9, |
| #endif |
| #if defined(CONFIG_BOOTM_VXWORKS) && \ |
| (defined(CONFIG_PPC) || defined(CONFIG_ARM)) |
| [IH_OS_VXWORKS] = do_bootm_vxworks, |
| #endif |
| #if defined(CONFIG_CMD_ELF) |
| [IH_OS_QNX] = do_bootm_qnxelf, |
| #endif |
| #ifdef CONFIG_INTEGRITY |
| [IH_OS_INTEGRITY] = do_bootm_integrity, |
| #endif |
| #ifdef CONFIG_ZIRCON_BOOT_IMAGE |
| [IH_OS_ZIRCON] = do_bootm_zircon, |
| #endif |
| }; |
| |
| /* Allow for arch specific config before we boot */ |
| __weak void arch_preboot_os(void) |
| { |
| /* please define platform specific arch_preboot_os() */ |
| } |
| |
| int boot_selected_os(int argc, char * const argv[], int state, |
| bootm_headers_t *images, boot_os_fn *boot_fn) |
| { |
| arch_preboot_os(); |
| boot_fn(state, argc, argv, images); |
| |
| /* Stand-alone may return when 'autostart' is 'no' */ |
| if (images->os.type == IH_TYPE_STANDALONE || |
| state == BOOTM_STATE_OS_FAKE_GO) /* We expect to return */ |
| return 0; |
| bootstage_error(BOOTSTAGE_ID_BOOT_OS_RETURNED); |
| #ifdef DEBUG |
| puts("\n## Control returned to monitor - resetting...\n"); |
| #endif |
| return BOOTM_ERR_RESET; |
| } |
| |
| boot_os_fn *bootm_os_get_boot_func(int os) |
| { |
| #ifdef CONFIG_NEEDS_MANUAL_RELOC |
| static bool relocated; |
| |
| if (!relocated) { |
| int i; |
| |
| /* relocate boot function table */ |
| for (i = 0; i < ARRAY_SIZE(boot_os); i++) |
| if (boot_os[i] != NULL) |
| boot_os[i] += gd->reloc_off; |
| |
| relocated = true; |
| } |
| #endif |
| return boot_os[os]; |
| } |