blob: a1c6663a2e3f913f9245e8343321777c4ac62327 [file] [log] [blame]
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#ifdef CONFIG_TWL6030_POWER
#include <twl6030.h>
static struct twl6030_data *twl;
static struct twl6030_data twl6030_info = {
.chip_type = chip_TWL6030,
.adc_rbase = GPCH0_LSB,
.adc_ctrl = CTRL_P2,
.adc_enable = CTRL_P2_SP2,
.vbat_mult = TWL6030_VBAT_MULT,
.vbat_shift = TWL6030_VBAT_SHIFT,
};
static struct twl6030_data twl6032_info = {
.chip_type = chip_TWL6032,
.adc_rbase = TWL6032_GPCH0_LSB,
.adc_ctrl = TWL6032_CTRL_P1,
.adc_enable = CTRL_P1_SP1,
.vbat_mult = TWL6032_VBAT_MULT,
.vbat_shift = TWL6032_VBAT_SHIFT,
};
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
u8 msb = 0;
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
twl->adc_rbase + channel_no * 2, &lsb);
if (ret)
return ret;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
twl->adc_rbase + 1 + channel_no * 2, &msb);
if (ret)
return ret;
return (msb << 8) | lsb;
}
static int twl6030_gpadc_sw2_trigger(void)
{
u8 val;
int ret = 0;
ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
twl->adc_ctrl, twl->adc_enable);
if (ret)
return ret;
/* Waiting until the SW1 conversion ends*/
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
twl->adc_ctrl, &val);
if (ret)
return ret;
udelay(1000);
}
return 0;
}
void twl6030_stop_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
return;
}
void twl6030_start_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CONTROLLER_INT_MASK, MBAT_TEMP);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
/* Enable USB charging */
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
return;
}
int twl6030_get_battery_current(void)
{
int battery_current = 0;
u8 msb = 0;
u8 lsb = 0;
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
battery_current = ((msb << 8) | lsb);
/* convert 10 bit signed number to 16 bit signed number */
if (battery_current >= 0x2000)
battery_current = (battery_current - 0x4000);
battery_current = battery_current * 3000 / 4096;
printf("Battery Current: %d mA\n", battery_current);
return battery_current;
}
int twl6030_get_battery_voltage(void)
{
int battery_volt = 0;
int ret = 0;
u8 vbatch;
if (twl->chip_type == chip_TWL6030) {
vbatch = TWL6030_GPADC_VBAT_CHNL;
} else {
ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
TWL6032_GPSELECT_ISB,
TWL6032_GPADC_VBAT_CHNL);
if (ret)
return ret;
vbatch = 0;
}
/* Start GPADC SW conversion */
ret = twl6030_gpadc_sw2_trigger();
if (ret) {
printf("Failed to convert battery voltage\n");
return ret;
}
/* measure Vbat voltage */
battery_volt = twl6030_gpadc_read_channel(vbatch);
if (battery_volt < 0) {
printf("Failed to read battery voltage\n");
return ret;
}
battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
printf("Battery Voltage: %d mV\n", battery_volt);
return battery_volt;
}
void twl6030_init_battery_charging(void)
{
u8 val = 0;
int battery_volt = 0;
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
if (ret) {
puts("twl6030_init_battery_charging(): could not determine chip!\n");
return;
}
if (val == 0x30) {
twl = &twl6030_info;
} else if (val == 0x32) {
twl = &twl6032_info;
} else {
puts("twl6030_init_battery_charging(): unsupported chip type\n");
return;
}
/* Enable VBAT measurement */
if (twl->chip_type == chip_TWL6030) {
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
TWL6030_GPADC_CTRL,
GPADC_CTRL_SCALER_DIV4);
} else {
twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
TWL6032_GPADC_CTRL2,
GPADC_CTRL2_CH18_SCALER_EN);
}
/* Enable GPADC module */
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
if (ret) {
printf("Failed to enable GPADC\n");
return;
}
battery_volt = twl6030_get_battery_voltage();
if (battery_volt < 0)
return;
if (battery_volt < 3000)
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
/* check for battery presence indirectly via Fuel gauge */
if ((val & VBUS_DET) && (battery_volt < 3300))
twl6030_start_usb_charging();
return;
}
void twl6030_power_mmc_init()
{
/* set voltage to 3.0 and turnon for APP */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15);
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21);
}
void twl6030_usb_device_settings()
{
u8 data = 0;
/* Select APP Group and set state to ON */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21);
twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data);
data |= 0x10;
/* Select the input supply for VBUS regulator */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data);
}
#endif