blob: 77ede6bba3a5d9655a7bc46be8dca39d70d2834d [file] [log] [blame] [edit]
/*
* SH QSPI (Quad SPI) driver
*
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <malloc.h>
#include <spi.h>
#include <asm/arch/rmobile.h>
#include <asm/io.h>
/* SH QSPI register bit masks <REG>_<BIT> */
#define SPCR_MSTR 0x08
#define SPCR_SPE 0x40
#define SPSR_SPRFF 0x80
#define SPSR_SPTEF 0x20
#define SPPCR_IO3FV 0x04
#define SPPCR_IO2FV 0x02
#define SPPCR_IO1FV 0x01
#define SPBDCR_RXBC0 (1 << 0)
#define SPCMD_SCKDEN (1 << 15)
#define SPCMD_SLNDEN (1 << 14)
#define SPCMD_SPNDEN (1 << 13)
#define SPCMD_SSLKP (1 << 7)
#define SPCMD_BRDV0 (1 << 2)
#define SPCMD_INIT1 SPCMD_SCKDEN | SPCMD_SLNDEN | \
SPCMD_SPNDEN | SPCMD_SSLKP | \
SPCMD_BRDV0
#define SPCMD_INIT2 SPCMD_SPNDEN | SPCMD_SSLKP | \
SPCMD_BRDV0
#define SPBFCR_TXRST (1 << 7)
#define SPBFCR_RXRST (1 << 6)
/* SH QSPI register set */
struct sh_qspi_regs {
unsigned char spcr;
unsigned char sslp;
unsigned char sppcr;
unsigned char spsr;
unsigned long spdr;
unsigned char spscr;
unsigned char spssr;
unsigned char spbr;
unsigned char spdcr;
unsigned char spckd;
unsigned char sslnd;
unsigned char spnd;
unsigned char dummy0;
unsigned short spcmd0;
unsigned short spcmd1;
unsigned short spcmd2;
unsigned short spcmd3;
unsigned char spbfcr;
unsigned char dummy1;
unsigned short spbdcr;
unsigned long spbmul0;
unsigned long spbmul1;
unsigned long spbmul2;
unsigned long spbmul3;
};
struct sh_qspi_slave {
struct spi_slave slave;
struct sh_qspi_regs *regs;
};
static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
{
return container_of(slave, struct sh_qspi_slave, slave);
}
static void sh_qspi_init(struct sh_qspi_slave *ss)
{
/* QSPI initialize */
/* Set master mode only */
writeb(SPCR_MSTR, &ss->regs->spcr);
/* Set SSL signal level */
writeb(0x00, &ss->regs->sslp);
/* Set MOSI signal value when transfer is in idle state */
writeb(SPPCR_IO3FV|SPPCR_IO2FV, &ss->regs->sppcr);
/* Set bit rate. See 58.3.8 Quad Serial Peripheral Interface */
writeb(0x01, &ss->regs->spbr);
/* Disable Dummy Data Transmission */
writeb(0x00, &ss->regs->spdcr);
/* Set clock delay value */
writeb(0x00, &ss->regs->spckd);
/* Set SSL negation delay value */
writeb(0x00, &ss->regs->sslnd);
/* Set next-access delay value */
writeb(0x00, &ss->regs->spnd);
/* Set equence command */
writew(SPCMD_INIT2, &ss->regs->spcmd0);
/* Reset transfer and receive Buffer */
setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
/* Clear transfer and receive Buffer control bit */
clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
/* Set equence control method. Use equence0 only */
writeb(0x00, &ss->regs->spscr);
/* Enable SPI function */
setbits_8(&ss->regs->spcr, SPCR_SPE);
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return 1;
}
void spi_cs_activate(struct spi_slave *slave)
{
struct sh_qspi_slave *ss = to_sh_qspi(slave);
/* Set master mode only */
writeb(SPCR_MSTR, &ss->regs->spcr);
/* Set command */
writew(SPCMD_INIT1, &ss->regs->spcmd0);
/* Reset transfer and receive Buffer */
setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
/* Clear transfer and receive Buffer control bit */
clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);
/* Set equence control method. Use equence0 only */
writeb(0x00, &ss->regs->spscr);
/* Enable SPI function */
setbits_8(&ss->regs->spcr, SPCR_SPE);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
struct sh_qspi_slave *ss = to_sh_qspi(slave);
/* Disable SPI Function */
clrbits_8(&ss->regs->spcr, SPCR_SPE);
}
void spi_init(void)
{
/* nothing to do */
}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct sh_qspi_slave *ss;
if (!spi_cs_is_valid(bus, cs))
return NULL;
ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
if (!ss) {
printf("SPI_error: Fail to allocate sh_qspi_slave\n");
return NULL;
}
ss->regs = (struct sh_qspi_regs *)SH_QSPI_BASE;
/* Init SH QSPI */
sh_qspi_init(ss);
return &ss->slave;
}
void spi_free_slave(struct spi_slave *slave)
{
struct sh_qspi_slave *spi = to_sh_qspi(slave);
free(spi);
}
int spi_claim_bus(struct spi_slave *slave)
{
return 0;
}
void spi_release_bus(struct spi_slave *slave)
{
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{
struct sh_qspi_slave *ss = to_sh_qspi(slave);
unsigned long nbyte;
int ret = 0;
unsigned char dtdata = 0, drdata;
unsigned char *tdata = &dtdata, *rdata = &drdata;
unsigned long *spbmul0 = &ss->regs->spbmul0;
if (dout == NULL && din == NULL) {
if (flags & SPI_XFER_END)
spi_cs_deactivate(slave);
return 0;
}
if (bitlen % 8) {
printf("%s: bitlen is not 8bit alined %d", __func__, bitlen);
return 1;
}
nbyte = bitlen / 8;
if (flags & SPI_XFER_BEGIN) {
spi_cs_activate(slave);
/* Set 1048576 byte */
writel(0x100000, spbmul0);
}
if (flags & SPI_XFER_END)
writel(nbyte, spbmul0);
if (dout != NULL)
tdata = (unsigned char *)dout;
if (din != NULL)
rdata = din;
while (nbyte > 0) {
while (!(readb(&ss->regs->spsr) & SPSR_SPTEF)) {
if (ctrlc()) {
puts("abort\n");
return 1;
}
udelay(10);
}
writeb(*tdata, (unsigned char *)(&ss->regs->spdr));
while ((readw(&ss->regs->spbdcr) != SPBDCR_RXBC0)) {
if (ctrlc()) {
puts("abort\n");
return 1;
}
udelay(1);
}
while (!(readb(&ss->regs->spsr) & SPSR_SPRFF)) {
if (ctrlc()) {
puts("abort\n");
return 1;
}
udelay(10);
}
*rdata = readb((unsigned char *)(&ss->regs->spdr));
if (dout != NULL)
tdata++;
if (din != NULL)
rdata++;
nbyte--;
}
if (flags & SPI_XFER_END)
spi_cs_deactivate(slave);
return ret;
}