blob: edea769a921dd8c58fde863abb021b08d92fcceb [file] [log] [blame]
/*
* (C) Copyright 2003
* Texas Instruments.
* Kshitij Gupta <kshitij@ti.com>
* Configuation settings for the TI OMAP Innovator board.
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
* Configuration for Integrator AP board.
*.
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "integrator-common.h"
/* Integrator/AP-specific configuration */
#define CONFIG_ARCH_INTEGRATOR
#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
/*
* PL010 Configuration
*/
#define CONFIG_PL010_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
#define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty"
#define CONFIG_BOOTCOMMAND ""
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
#define CONFIG_SYS_FLASH_BASE 0x24000000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_ENV_SIZE 32768
/*-----------------------------------------------------------------------
* PCI definitions
*/
#define CONFIG_PCI
#define CONFIG_CMD_PCI
#define CONFIG_PCI_PNP
#define CONFIG_NET_MULTI
#define CONFIG_TULIP
#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
/*-----------------------------------------------------------------------
* There are various dependencies on the core module (CM) fitted
* Users should refer to their CM user guide
* - when porting adjust u-boot/Makefile accordingly
* to define the necessary CONFIG_ s for the CM involved
* see e.g. integratorcp_CM926EJ-S_config
*/
#include "armcoremodule.h"
#endif /* __CONFIG_H */