blob: 608719a7eacb7725a3cfac08521397a8b7d6acc0 [file] [log] [blame]
/*
* (C) Copyright 2003
* Texas Instruments.
* Kshitij Gupta <kshitij@ti.com>
* Configuation settings for the TI OMAP Innovator board.
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
* Configuration for Compact Integrator board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "integrator-common.h"
/* Integrator CP-specific configuration */
#define CONFIG_ARCH_CINTEGRATOR
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
/*
* Hardware drivers
*/
#define CONFIG_SMC91111
#define CONFIG_SMC_USE_32_BIT
#define CONFIG_SMC91111_BASE 0xC8000000
#undef CONFIG_SMC91111_EXT_PHY
/* PL011 configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 14745600
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
#define CONFIG_SERVERIP 192.168.1.100
#define CONFIG_IPADDR 192.168.1.104
#define CONFIG_BOOTFILE "uImage"
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
/*
* FLASH and environment organization
* Top varies according to amount fitted
* Reserve top 4 blocks of flash
* - ARM Boot Monitor
* - Unused
* - SIB block
* - U-Boot environment
*
* Base is always 0x24000000
*/
#define CONFIG_SYS_FLASH_BASE 0x24000000
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_SECT 64
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_SYS_MONITOR_LEN 0x00100000
#define CONFIG_ENV_IS_IN_FLASH 1
/*
* Move up the U-Boot & monitor area if more flash is fitted.
* If this U-Boot is to be run on Integrators with varying flash sizes,
* drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
* register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
* - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
* embedded in the boot monitor(s) area
*/
#if ( PHYS_FLASH_SIZE == 0x04000000 )
#define CONFIG_ENV_ADDR 0x27F00000
#define CONFIG_SYS_MONITOR_BASE 0x27F40000
#elif (PHYS_FLASH_SIZE == 0x02000000 )
#define CONFIG_ENV_ADDR 0x25F00000
#define CONFIG_SYS_MONITOR_BASE 0x25F40000
#else
#define CONFIG_ENV_ADDR 0x24F00000
#define CONFIG_SYS_MONITOR_BASE 0x27F40000
#endif
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
#define CONFIG_ENV_SIZE 8192 /* 8KB */
#endif /* __CONFIG_H */