blob: dc2615533c1fbc9bca3394834e9d0160306a06ba [file] [log] [blame] [edit]
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Prafulla Wadaskar <prafulla@marvell.com>
*
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2011-2012
* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* for linking errors see
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
*/
#ifndef _CONFIG_KM_KIRKWOOD_H
#define _CONFIG_KM_KIRKWOOD_H
/* KM_KIRKWOOD */
#if defined(CONFIG_KM_KIRKWOOD)
#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
#define CONFIG_HOSTNAME km_kirkwood
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
#define CONFIG_HOSTNAME km_kirkwood_pci
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
/* KM_KIRKWOOD_128M16 */
#elif defined(CONFIG_KM_KIRKWOOD_128M16)
#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16"
#define CONFIG_HOSTNAME km_kirkwood_128m16
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_NUSA / KM_SUGP1 */
#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
# if defined(CONFIG_KM_NUSA)
#define CONFIG_IDENT_STRING "\nKeymile NUSA"
#define CONFIG_HOSTNAME kmnusa
# elif defined(CONFIG_KM_SUGP1)
#define CONFIG_IDENT_STRING "\nKeymile SUGP1"
#define CONFIG_HOSTNAME kmsugp1
#define KM_PCIE_RESET_MPP7
#endif
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_PIGGY4_88E6352
#define CONFIG_MV88E6352_SWITCH
#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
#define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
#define CONFIG_HOSTNAME mgcoge3un
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6061
/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
#define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
#define CONFIG_HOSTNAME kmcoge5un
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6352
/* KM_PORTL2 */
#elif defined(CONFIG_KM_PORTL2)
#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
#define CONFIG_HOSTNAME portl2
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061
/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_IDENT_STRING "\nKeymile SUV31"
#define CONFIG_HOSTNAME kmsuv31
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
#else
#error ("Board unsupported")
#endif
/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"
#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
#define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/
#endif
#if defined(CONFIG_KM_PIGGY4_88E6352)
/*
* Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
* an Marvell 88E6352 simple switch.
* In this case we have to change the default settings for the etherent mac.
* There is NO ethernet phy. The ARM and Switch are conencted directly over
* RGMII in MAC-MAC mode
* In this case 1GBit full duplex and autoneg off
*/
#define PORT_SERIAL_CONTROL_VALUE ( \
MVGBE_FORCE_LINK_PASS | \
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
MVGBE_ADV_NO_FLOW_CTRL | \
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
MVGBE_FORCE_BP_MODE_NO_JAM | \
(1 << 9) /* Reserved bit has to be 1 */ | \
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
MVGBE_DTE_ADV_0 | \
MVGBE_MIIPHY_MAC_MODE | \
MVGBE_AUTO_NEG_NO_CHANGE | \
MVGBE_MAX_RX_PACKET_1552BYTE | \
MVGBE_CLR_EXT_LOOPBACK | \
MVGBE_SET_FULL_DUPLEX_MODE | \
MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
MVGBE_SET_GMII_SPEED_TO_1000 |\
MVGBE_SET_MII_SPEED_TO_100)
#endif
#ifdef CONFIG_KM_PIGGY4_88E6061
/*
* Some keymile boards like mgcoge3un have their PIGGY4 connected via
* an Marvell 88E6061 simple switch.
* In this case we have to change the default settings for the
* ethernet phy connected to the kirkwood.
* In this case 100MB full duplex and autoneg off
*/
#define PORT_SERIAL_CONTROL_VALUE ( \
MVGBE_FORCE_LINK_PASS | \
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
MVGBE_ADV_NO_FLOW_CTRL | \
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
MVGBE_FORCE_BP_MODE_NO_JAM | \
(1 << 9) /* Reserved bit has to be 1 */ | \
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
MVGBE_DTE_ADV_0 | \
MVGBE_MIIPHY_MAC_MODE | \
MVGBE_AUTO_NEG_NO_CHANGE | \
MVGBE_MAX_RX_PACKET_1552BYTE | \
MVGBE_CLR_EXT_LOOPBACK | \
MVGBE_SET_FULL_DUPLEX_MODE | \
MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
MVGBE_SET_GMII_SPEED_TO_10_100 |\
MVGBE_SET_MII_SPEED_TO_100)
#endif
#ifdef CONFIG_KM_DISABLE_PCI
#undef CONFIG_KIRKWOOD_PCIE_INIT
#endif
#endif /* _CONFIG_KM_KIRKWOOD */