blob: 8f1e25696e8b419ad93b31d0109f85c09952ece2 [file] [log] [blame] [edit]
/*
* Copyright (C) 2011 Samsung Electronics
*
* Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ORIGEN_H
#define __CONFIG_ORIGEN_H
#include <configs/exynos4-common.h>
#define CONFIG_SYS_PROMPT "ORIGEN # "
/* High Level Configuration Options */
#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
#define CONFIG_ORIGEN 1 /* working with ORIGEN*/
#define CONFIG_SYS_DCACHE_OFF 1
/* ORIGEN has 4 bank of DRAM */
#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
#define CONFIG_SYS_TEXT_BASE 0x43E00000
#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_MONITOR_BASE 0x00000000
/* Power Down Modes */
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
#define S5P_CHECK_LPA 0xABAD0000
#undef CONFIG_CMD_PING
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_TEXT_BASE 0x02021410
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x40007000\0" \
"rdaddr=0x48000000\0" \
"kerneladdr=0x40007000\0" \
"ramdiskaddr=0x48000000\0" \
"console=ttySAC2,115200n8\0" \
"mmcdev=0\0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
"source ${loadaddr}\0"
#define CONFIG_BOOTCOMMAND \
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"echo Loaded environment from ${bootenv};" \
"run importbootenv;" \
"fi;" \
"if test -n $uenvcmd; then " \
"echo Running uenvcmd ...;" \
"run uenvcmd;" \
"fi;" \
"if run loadbootscript; then " \
"run bootscript; " \
"fi; " \
"fi;" \
"load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
#define CONFIG_IDENT_STRING " for ORIGEN"
#define CONFIG_CLK_1000_400_200
/* MIU (Memory Interleaving Unit) */
#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
#define RESERVE_BLOCK_SIZE (512)
#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
#define CONFIG_SYS_INIT_SP_ADDR 0x02040000
/* U-boot copy size from boot Media to DRAM.*/
#define COPY_BL2_SIZE 0x80000
#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
#endif /* __CONFIG_H */