| /* |
| * Copyright (C) 2012 |
| * David Purdy <david.c.purdy@gmail.com> |
| * |
| * Based on Kirkwood support: |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _CONFIG_POGO_E02_H |
| #define _CONFIG_POGO_E02_H |
| |
| /* |
| * Machine type definition and ID |
| */ |
| #define MACH_TYPE_POGO_E02 3542 |
| #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 |
| #define CONFIG_IDENT_STRING "\nPogo E02" |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ |
| #define CONFIG_KW88F6281 /* SOC Name */ |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| |
| /* |
| * Commands configuration |
| */ |
| #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ |
| #define CONFIG_SYS_MVFS |
| #include <config_cmd_default.h> |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_ENV |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NAND |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_USB |
| |
| /* |
| * mv-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-common.h" |
| |
| /* Remove or override few declarations from mv-common.h */ |
| #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ |
| #define CONFIG_SYS_PROMPT "PogoE02> " |
| |
| /* |
| * Environment variables configurations |
| */ |
| #ifdef CONFIG_CMD_NAND |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ |
| #else |
| #define CONFIG_ENV_IS_NOWHERE |
| #endif |
| |
| #define CONFIG_ENV_SIZE 0x20000 /* 128k */ |
| #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ |
| |
| /* |
| * Default environment variables |
| */ |
| #define CONFIG_BOOTCOMMAND \ |
| "setenv bootargs $(bootargs_console); " \ |
| "run bootcmd_usb; " \ |
| "bootm 0x00800000 0x01100000" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ |
| "32M(rootfs),-(data)\0"\ |
| "mtdids=nand0=orion_nand\0"\ |
| "bootargs_console=console=ttyS0,115200\0" \ |
| "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ |
| "ext2load usb 0:1 0x01100000 /uInitrd\0" |
| |
| /* |
| * Ethernet Driver configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| #define CONFIG_PHY_BASE_ADR 0 |
| #endif /* CONFIG_CMD_NET */ |
| |
| /* |
| * File system |
| */ |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_UBI |
| #define CONFIG_CMD_UBIFS |
| #define CONFIG_RBTREE |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ |
| #define CONFIG_MTD_PARTITIONS |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_LZO |
| |
| #endif /* _CONFIG_POGO_E02_H */ |
