blob: fddba92389c0f5774fdd20f5044d9613f47397e7 [file] [log] [blame] [edit]
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* Copyright (C) 2007 Logic Product Development, Inc.
* Peter Barada <peterb@logicpd.com>
*
* Copyright (C) 2007 MontaVista Software, Inc.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* (C) Copyright 2010
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
*/
/* This needs to be set prior to including km/km83xx-common.h */
#define CONFIG_SYS_TEXT_BASE 0xF0000000
#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
#define CONFIG_HOSTNAME suvd3
#define CONFIG_KM_BOARD_NAME "suvd3"
/* include common defines/options for all 8321 Keymile boards */
#include "km/km8321-common.h"
#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
#define CONFIG_HOSTNAME kmvect1
#define CONFIG_KM_BOARD_NAME "kmvect1"
/* include common defines/options for all 8309 Keymile boards */
#include "km/km8309-common.h"
#else
#error Supported boards are: SUVD3, KMVECT1
#endif
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
/*
* Init Local Bus Memory Controller:
*
* Bank Bus Machine PortSz Size Device
* ---- --- ------- ------ ----- ------
* 2 Local UPMA 16 bit 256MB APP1
* 3 Local GPCM 16 bit 256MB APP2
*
*/
/*
* APP1 on the local bus CS2
*/
#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
BR_PS_16 | \
BR_MS_UPMA | \
BR_V)
#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
BR_PS_16 | \
BR_V)
#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
OR_GPCM_CSNT | \
OR_GPCM_ACS_DIV4 | \
OR_GPCM_SCY_3 | \
OR_GPCM_TRLX_SET)
#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
0x0000c000 | \
MxMR_WLFx_2X)
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/*
* MMU Setup
*/
/* APP1: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
/*
* QE UEC ethernet configuration
*/
#if defined(CONFIG_KMVECT1)
#define CONFIG_MV88E6352_SWITCH
#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* ethernet port connected to simple switch 88e6122 (UEC0) */
#define CONFIG_UEC_ETH1
#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_FIXED_PHY 0xFFFFFFFF
#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
{devnum, speed, duplex}
#define CONFIG_SYS_FIXED_PHY_PORTS \
CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
/* ethernet port connected to piggy (UEC2) */
#define CONFIG_HAS_ETH1
#define CONFIG_UEC_ETH2
#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_KMVECT1 */
#endif /* __CONFIG_H */