blob: a9c6d2e601cd61c4a346e83da37fc0987c05b446 [file] [log] [blame] [edit]
/*
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
* on behalf of DENX Software Engineering GmbH
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_TK71_H__
#define __CONFIG_TK71_H__
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nKa-Ro TK71"
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_NR_DRAM_BANKS 1
#define MACH_TYPE_TK71 2399
#define CONFIG_MACH_TYPE MACH_TYPE_TK71
/*
* Commands configuration
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_NO_FLASH
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/*
* NAND flash
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_DEV "nand0,3"
#endif
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0}
#define CONFIG_PHY_BASE_ADR 0x08
#endif
/*
* USB/EHCI
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_KIRKWOOD
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#endif
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE 0x20000
#else
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_ADDR 0x80000
#define CONFIG_ENV_OFFSET 0x80000
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
"update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
"update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
"update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
"bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
#define MTDIDS_DEFAULT "nand0=orion_nand"
#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS
#define PHYS_SDRAM_1 0x00000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
#endif /* __CONFIG_TK71_H__ */