blob: 5913b39e268ee30598de449d03447a8205c80dae [file] [log] [blame] [edit]
/*
* Common SPI flash Interface
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#ifndef _SPI_FLASH_H_
#define _SPI_FLASH_H_
#include <dm.h> /* Because we dereference struct udevice here */
#include <linux/types.h>
#ifndef CONFIG_SF_DEFAULT_SPEED
# define CONFIG_SF_DEFAULT_SPEED 1000000
#endif
#ifndef CONFIG_SF_DEFAULT_MODE
# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
#endif
#ifndef CONFIG_SF_DEFAULT_CS
# define CONFIG_SF_DEFAULT_CS 0
#endif
#ifndef CONFIG_SF_DEFAULT_BUS
# define CONFIG_SF_DEFAULT_BUS 0
#endif
struct spi_slave;
/**
* struct spi_flash - SPI flash structure
*
* @spi: SPI slave
* @name: Name of SPI flash
* @dual_flash: Indicates dual flash memories - dual stacked, parallel
* @shift: Flash shift useful in dual parallel
* @size: Total flash size
* @page_size: Write (page) size
* @sector_size: Sector size
* @erase_size: Erase size
* @bank_read_cmd: Bank read cmd
* @bank_write_cmd: Bank write cmd
* @bank_curr: Current flash bank
* @poll_cmd: Poll cmd - for flash erase/program
* @erase_cmd: Erase cmd 4K, 32K, 64K
* @read_cmd: Read cmd - Array Fast, Extn read and quad read.
* @write_cmd: Write cmd - page and quad program.
* @dummy_byte: Dummy cycles for read operation.
* @memory_map: Address of read-only SPI flash access
* @read: Flash read ops: Read len bytes at offset into buf
* Supported cmds: Fast Array Read
* @write: Flash write ops: Write len bytes from buf into offset
* Supported cmds: Page Program
* @erase: Flash erase ops: Erase len bytes from offset
* Supported cmds: Sector erase 4K, 32K, 64K
* return 0 - Success, 1 - Failure
*/
struct spi_flash {
#ifdef CONFIG_DM_SPI_FLASH
struct spi_slave *spi;
struct udevice *dev;
#else
struct spi_slave *spi;
#endif
const char *name;
u8 dual_flash;
u8 shift;
u32 size;
u32 page_size;
u32 sector_size;
u32 erase_size;
#ifdef CONFIG_SPI_FLASH_BAR
u8 bank_read_cmd;
u8 bank_write_cmd;
u8 bank_curr;
#endif
u8 poll_cmd;
u8 erase_cmd;
u8 read_cmd;
u8 write_cmd;
u8 dummy_byte;
void *memory_map;
#ifndef CONFIG_DM_SPI_FLASH
/*
* These are not strictly needed for driver model, but keep them here
* whilt the transition is in progress.
*
* Normally each driver would provide its own operations, but for
* SPI flash most chips use the same algorithms. One approach is
* to create a 'common' SPI flash device which knows how to talk
* to most devices, and then allow other drivers to be used instead
* if requird, perhaps with a way of scanning through the list to
* find the driver that matches the device.
*/
int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
int (*write)(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
#endif
};
struct dm_spi_flash_ops {
int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf);
int (*write)(struct udevice *dev, u32 offset, size_t len,
const void *buf);
int (*erase)(struct udevice *dev, u32 offset, size_t len);
};
/* Access the serial operations for a device */
#define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
#ifdef CONFIG_DM_SPI_FLASH
int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode,
struct udevice **devp);
/* Compatibility function - this is the old U-Boot API */
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
/* Compatibility function - this is the old U-Boot API */
void spi_flash_free(struct spi_flash *flash);
int spi_flash_remove(struct udevice *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
size_t len, void *buf)
{
return sf_get_ops(flash->dev)->read(flash->dev, offset, len, buf);
}
static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
return sf_get_ops(flash->dev)->write(flash->dev, offset, len, buf);
}
static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
size_t len)
{
return sf_get_ops(flash->dev)->erase(flash->dev, offset, len);
}
struct sandbox_state;
int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
struct udevice *bus, int of_offset, const char *spec);
void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
#else
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
/**
* Set up a new SPI flash from an fdt node
*
* @param blob Device tree blob
* @param slave_node Pointer to this SPI slave node in the device tree
* @param spi_node Cached pointer to the SPI interface this node belongs
* to
* @return 0 if ok, -1 on error
*/
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node);
void spi_flash_free(struct spi_flash *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
size_t len, void *buf)
{
return flash->read(flash, offset, len, buf);
}
static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
return flash->write(flash, offset, len, buf);
}
static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
size_t len)
{
return flash->erase(flash, offset, len);
}
#endif
void spi_boot(void) __noreturn;
void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
#endif /* _SPI_FLASH_H_ */