board/freescale/mx6qsabreauto/mx6solo.cfg

/*
 * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
 * Jason Liu <r64343@freescale.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 *
 * Refer docs/README.imxmage for more details about how-to configure
 * and create imximage boot image
 *
 * The syntax is taken as close as possible with the kwbimage
 */

#define __ASSEMBLY__
#include <config.h>

/* image version */

IMAGE_VERSION 2

/*
 * Boot Device : one of spi, sd, eimnor, nand, sata:
 * spinor: flash_offset: 0x0400
 * nand:   flash_offset: 0x0400
 * sata:   flash_offset: 0x0400
 * sd/mmc: flash_offset: 0x0400
 * eimnor: flash_offset: 0x1000
 */

#if defined(CONFIG_NOR_BOOT)
BOOT_FROM       nor
#else /* others has the same flash_offset as sd */
BOOT_FROM       sd
#endif

#ifdef CONFIG_USE_IMXIMG_PLUGIN
/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
PLUGIN	board/freescale/mx6qsabreauto/plugin.bin 0x00907000
#else

#ifdef CONFIG_SECURE_BOOT
CSF CONFIG_CSF_SIZE
#endif

/*
 * Device Configuration Data (DCD)
 *
 * Each entry must have the format:
 * Addr-type           Address        Value
 *
 * where:
 *	Addr-type register length (1,2 or 4 bytes)
 *	Address	  absolute address of the register
 *	value	  value to be stored in the register
 */
#ifdef CONFIG_IMX_OPTEE
SET_BIT 4 0x20c4070 0x3c00000
DATA 4 0x20e0024 0x00000003
CHECK_BITS_SET 4 0x20e0024 0x3
#endif
DATA 4, 0x020e0774, 0x000C0000
DATA 4, 0x020e0754, 0x00000000
DATA 4, 0x020e04ac, 0x00000030
DATA 4, 0x020e04b0, 0x00000030
DATA 4, 0x020e0464, 0x00000030
DATA 4, 0x020e0490, 0x00000030
DATA 4, 0x020e074c, 0x00000030
DATA 4, 0x020e0494, 0x00000030
DATA 4, 0x020e04a0, 0x00000000
DATA 4, 0x020e04b4, 0x00000030
DATA 4, 0x020e04b8, 0x00000030
DATA 4, 0x020e076c, 0x00000030
DATA 4, 0x020e0750, 0x00020000
DATA 4, 0x020e04bc, 0x00000028
DATA 4, 0x020e04c0, 0x00000028
DATA 4, 0x020e04c4, 0x00000028
DATA 4, 0x020e04c8, 0x00000028
DATA 4, 0x020e0760, 0x00020000
DATA 4, 0x020e0764, 0x00000028
DATA 4, 0x020e0770, 0x00000028
DATA 4, 0x020e0778, 0x00000028
DATA 4, 0x020e077c, 0x00000028
DATA 4, 0x020e0470, 0x00000028
DATA 4, 0x020e0474, 0x00000028
DATA 4, 0x020e0478, 0x00000028
DATA 4, 0x020e047c, 0x00000028
DATA 4, 0x021b0800, 0xa1390003
DATA 4, 0x021b080c, 0x001F001F
DATA 4, 0x021b0810, 0x001F001F
DATA 4, 0x021b083c, 0x421C0216
DATA 4, 0x021b0840, 0x017B017A
DATA 4, 0x021b0848, 0x4B4A4E4C
DATA 4, 0x021b0850, 0x3F3F3334
DATA 4, 0x021b081c, 0x33333333
DATA 4, 0x021b0820, 0x33333333
DATA 4, 0x021b0824, 0x33333333
DATA 4, 0x021b0828, 0x33333333
DATA 4, 0x021b08b8, 0x00000800
DATA 4, 0x021b0004, 0x00020025
DATA 4, 0x021b0008, 0x00333030
DATA 4, 0x021b000c, 0x676B5313
DATA 4, 0x021b0010, 0xB66E8B63
DATA 4, 0x021b0014, 0x01FF00DB
DATA 4, 0x021b0018, 0x00001740
DATA 4, 0x021b001c, 0x00008000
DATA 4, 0x021b002c, 0x000026d2
DATA 4, 0x021b0030, 0x006B1023
DATA 4, 0x021b0040, 0x00000027
DATA 4, 0x021b0000, 0x84190000
DATA 4, 0x021b001c, 0x04008032
DATA 4, 0x021b001c, 0x00008033
DATA 4, 0x021b001c, 0x00048031
DATA 4, 0x021b001c, 0x05208030
DATA 4, 0x021b001c, 0x04008040
DATA 4, 0x021b0020, 0x00005800
DATA 4, 0x021b0818, 0x00011117
DATA 4, 0x021b0004, 0x00025565
DATA 4, 0x021b0404, 0x00011006
DATA 4, 0x021b001c, 0x00000000

/* set the default clock gate to save power */
DATA 4, 0x020c4068, 0x00C03F3F
DATA 4, 0x020c406c, 0x0030FC03
DATA 4, 0x020c4070, 0x0FFFC000
DATA 4, 0x020c4074, 0x3FF00000
DATA 4, 0x020c4078, 0xFFFFF300
DATA 4, 0x020c407c, 0x0F0000C3
DATA 4, 0x020c4080, 0x00000FFF

/* enable AXI cache for VDOA/VPU/IPU */
DATA 4, 0x020e0010, 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4, 0x020e0018, 0x007F007F
DATA 4, 0x020e001c, 0x007F007F
#endif