| menu "mpc8xx CPU" | |
| depends on MPC8xx | |
| config SYS_CPU | |
| default "mpc8xx" | |
| choice | |
| prompt "Target select" | |
| optional | |
| config TARGET_MCR3000 | |
| bool "Support MCR3000 board from CSSI" | |
| endchoice | |
| choice | |
| prompt "CPU select" | |
| default MPC866 | |
| config MPC866 | |
| bool "MPC866" | |
| config MPC885 | |
| bool "MPC885" | |
| endchoice | |
| config MPC8xx_WATCHDOG | |
| bool "Watchdog" | |
| select HW_WATCHDOG | |
| config 8xx_GCLK_FREQ | |
| int "CPU GCLK Frequency" | |
| comment "Specific commands" | |
| config CMD_IMMAP | |
| bool "Enable various commands to dump IMMR information" | |
| help | |
| This enables various commands such as: | |
| siuinfo - print System Interface Unit (SIU) registers | |
| memcinfo - print Memory Controller registers | |
| comment "Configuration Registers" | |
| config SYS_SIUMCR | |
| hex "SIUMCR register" | |
| help | |
| SIU Module Configuration (11-6) | |
| config SYS_SYPCR | |
| hex "SYPCR register" | |
| help | |
| System Protection Control (11-9) | |
| config SYS_TBSCR | |
| hex "TBSCR register" | |
| help | |
| Time Base Status and Control (11-26) | |
| config SYS_PISCR | |
| hex "PISCR register" | |
| help | |
| Periodic Interrupt Status and Control (11-31) | |
| config SYS_PLPRCR_BOOL | |
| bool "Customise PLPRCR" | |
| config SYS_PLPRCR | |
| hex "PLPRCR register" | |
| depends on SYS_PLPRCR_BOOL | |
| help | |
| PLL, Low-Power, and Reset Control Register (15-30) | |
| config SYS_SCCR | |
| hex "SCCR register" | |
| help | |
| System Clock and reset Control Register (15-27) | |
| config SYS_SCCR_MASK | |
| hex "MASK for setting SCCR register" | |
| config SYS_DER | |
| hex "DER register" | |
| help | |
| Debug Event Register (37-47) | |
| comment "Memory mapping" | |
| config SYS_BR0_PRELIM | |
| hex "Preliminary value for BR0" | |
| config SYS_OR0_PRELIM | |
| hex "Preliminary value for OR0" | |
| config SYS_BR1_PRELIM_BOOL | |
| bool "Define Bank 1" | |
| config SYS_BR1_PRELIM | |
| hex "Preliminary value for BR1" | |
| depends on SYS_BR1_PRELIM_BOOL | |
| config SYS_OR1_PRELIM | |
| hex "Preliminary value for OR1" | |
| depends on SYS_BR1_PRELIM_BOOL | |
| config SYS_BR2_PRELIM_BOOL | |
| bool "Define Bank 2" | |
| config SYS_BR2_PRELIM | |
| hex "Preliminary value for BR2" | |
| depends on SYS_BR2_PRELIM_BOOL | |
| config SYS_OR2_PRELIM | |
| hex "Preliminary value for OR2" | |
| depends on SYS_BR2_PRELIM_BOOL | |
| config SYS_BR3_PRELIM_BOOL | |
| bool "Define Bank 3" | |
| config SYS_BR3_PRELIM | |
| hex "Preliminary value for BR3" | |
| depends on SYS_BR3_PRELIM_BOOL | |
| config SYS_OR3_PRELIM | |
| hex "Preliminary value for OR3" | |
| depends on SYS_BR3_PRELIM_BOOL | |
| config SYS_BR4_PRELIM_BOOL | |
| bool "Define Bank 4" | |
| config SYS_BR4_PRELIM | |
| hex "Preliminary value for BR4" | |
| depends on SYS_BR4_PRELIM_BOOL | |
| config SYS_OR4_PRELIM | |
| hex "Preliminary value for OR4" | |
| depends on SYS_BR4_PRELIM_BOOL | |
| config SYS_BR5_PRELIM_BOOL | |
| bool "Define Bank 5" | |
| config SYS_BR5_PRELIM | |
| hex "Preliminary value for BR5" | |
| depends on SYS_BR5_PRELIM_BOOL | |
| config SYS_OR5_PRELIM | |
| hex "Preliminary value for OR5" | |
| depends on SYS_BR5_PRELIM_BOOL | |
| config SYS_BR6_PRELIM_BOOL | |
| bool "Define Bank 6" | |
| config SYS_BR6_PRELIM | |
| hex "Preliminary value for BR6" | |
| depends on SYS_BR6_PRELIM_BOOL | |
| config SYS_OR6_PRELIM | |
| hex "Preliminary value for OR6" | |
| depends on SYS_BR6_PRELIM_BOOL | |
| config SYS_BR7_PRELIM_BOOL | |
| bool "Define Bank 7" | |
| config SYS_BR7_PRELIM | |
| hex "Preliminary value for BR7" | |
| depends on SYS_BR7_PRELIM_BOOL | |
| config SYS_OR7_PRELIM | |
| hex "Preliminary value for OR7" | |
| depends on SYS_BR7_PRELIM_BOOL | |
| config SYS_IMMR | |
| hex "Value for IMMR" | |
| source "board/cssi/MCR3000/Kconfig" | |
| endmenu | |