blob: a367f117740386c3d37028ad93f2b725caa9420a [file] [log] [blame] [edit]
/*
* Allwinner NAND randomizer and image builder implementation:
*
* Copyright © 2016 NextThing Co.
* Copyright © 2016 Free Electrons
*
* Author: Boris Brezillon <boris.brezillon@free-electrons.com>
*
*/
#include <linux/bch.h>
#include <getopt.h>
#include <version.h>
#define BCH_PRIMITIVE_POLY 0x5803
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
struct image_info {
int ecc_strength;
int ecc_step_size;
int page_size;
int oob_size;
int usable_page_size;
int eraseblock_size;
int scramble;
int boot0;
off_t offset;
const char *source;
const char *dest;
};
static void swap_bits(uint8_t *buf, int len)
{
int i, j;
for (j = 0; j < len; j++) {
uint8_t byte = buf[j];
buf[j] = 0;
for (i = 0; i < 8; i++) {
if (byte & (1 << i))
buf[j] |= (1 << (7 - i));
}
}
}
static uint16_t lfsr_step(uint16_t state, int count)
{
state &= 0x7fff;
while (count--)
state = ((state >> 1) |
((((state >> 0) ^ (state >> 1)) & 1) << 14)) & 0x7fff;
return state;
}
static uint16_t default_scrambler_seeds[] = {
0x2b75, 0x0bd0, 0x5ca3, 0x62d1, 0x1c93, 0x07e9, 0x2162, 0x3a72,
0x0d67, 0x67f9, 0x1be7, 0x077d, 0x032f, 0x0dac, 0x2716, 0x2436,
0x7922, 0x1510, 0x3860, 0x5287, 0x480f, 0x4252, 0x1789, 0x5a2d,
0x2a49, 0x5e10, 0x437f, 0x4b4e, 0x2f45, 0x216e, 0x5cb7, 0x7130,
0x2a3f, 0x60e4, 0x4dc9, 0x0ef0, 0x0f52, 0x1bb9, 0x6211, 0x7a56,
0x226d, 0x4ea7, 0x6f36, 0x3692, 0x38bf, 0x0c62, 0x05eb, 0x4c55,
0x60f4, 0x728c, 0x3b6f, 0x2037, 0x7f69, 0x0936, 0x651a, 0x4ceb,
0x6218, 0x79f3, 0x383f, 0x18d9, 0x4f05, 0x5c82, 0x2912, 0x6f17,
0x6856, 0x5938, 0x1007, 0x61ab, 0x3e7f, 0x57c2, 0x542f, 0x4f62,
0x7454, 0x2eac, 0x7739, 0x42d4, 0x2f90, 0x435a, 0x2e52, 0x2064,
0x637c, 0x66ad, 0x2c90, 0x0bad, 0x759c, 0x0029, 0x0986, 0x7126,
0x1ca7, 0x1605, 0x386a, 0x27f5, 0x1380, 0x6d75, 0x24c3, 0x0f8e,
0x2b7a, 0x1418, 0x1fd1, 0x7dc1, 0x2d8e, 0x43af, 0x2267, 0x7da3,
0x4e3d, 0x1338, 0x50db, 0x454d, 0x764d, 0x40a3, 0x42e6, 0x262b,
0x2d2e, 0x1aea, 0x2e17, 0x173d, 0x3a6e, 0x71bf, 0x25f9, 0x0a5d,
0x7c57, 0x0fbe, 0x46ce, 0x4939, 0x6b17, 0x37bb, 0x3e91, 0x76db,
};
static uint16_t brom_scrambler_seeds[] = { 0x4a80 };
static void scramble(const struct image_info *info,
int page, uint8_t *data, int datalen)
{
uint16_t state;
int i;
/* Boot0 is always scrambled no matter the command line option. */
if (info->boot0) {
state = brom_scrambler_seeds[0];
} else {
unsigned seedmod = info->eraseblock_size / info->page_size;
/* Bail out earlier if the user didn't ask for scrambling. */
if (!info->scramble)
return;
if (seedmod > ARRAY_SIZE(default_scrambler_seeds))
seedmod = ARRAY_SIZE(default_scrambler_seeds);
state = default_scrambler_seeds[page % seedmod];
}
/* Prepare the initial state... */
state = lfsr_step(state, 15);
/* and start scrambling data. */
for (i = 0; i < datalen; i++) {
data[i] ^= state;
state = lfsr_step(state, 8);
}
}
static int write_page(const struct image_info *info, uint8_t *buffer,
FILE *src, FILE *rnd, FILE *dst,
struct bch_control *bch, int page)
{
int steps = info->usable_page_size / info->ecc_step_size;
int eccbytes = DIV_ROUND_UP(info->ecc_strength * 14, 8);
off_t pos = ftell(dst);
size_t pad, cnt;
int i;
if (eccbytes % 2)
eccbytes++;
memset(buffer, 0xff, info->page_size + info->oob_size);
cnt = fread(buffer, 1, info->usable_page_size, src);
if (!cnt) {
if (!feof(src)) {
fprintf(stderr,
"Failed to read data from the source\n");
return -1;
} else {
return 0;
}
}
fwrite(buffer, info->page_size + info->oob_size, 1, dst);
for (i = 0; i < info->usable_page_size; i++) {
if (buffer[i] != 0xff)
break;
}
/* We leave empty pages at 0xff. */
if (i == info->usable_page_size)
return 0;
/* Restore the source pointer to read it again. */
fseek(src, -cnt, SEEK_CUR);
/* Randomize unused space if scrambling is required. */
if (info->scramble) {
int offs;
if (info->boot0) {
size_t ret;
offs = steps * (info->ecc_step_size + eccbytes + 4);
cnt = info->page_size + info->oob_size - offs;
ret = fread(buffer + offs, 1, cnt, rnd);
if (!ret && !feof(rnd)) {
fprintf(stderr,
"Failed to read random data\n");
return -1;
}
} else {
offs = info->page_size + (steps * (eccbytes + 4));
cnt = info->page_size + info->oob_size - offs;
memset(buffer + offs, 0xff, cnt);
scramble(info, page, buffer + offs, cnt);
}
fseek(dst, pos + offs, SEEK_SET);
fwrite(buffer + offs, cnt, 1, dst);
}
for (i = 0; i < steps; i++) {
int ecc_offs, data_offs;
uint8_t *ecc;
memset(buffer, 0xff, info->ecc_step_size + eccbytes + 4);
ecc = buffer + info->ecc_step_size + 4;
if (info->boot0) {
data_offs = i * (info->ecc_step_size + eccbytes + 4);
ecc_offs = data_offs + info->ecc_step_size + 4;
} else {
data_offs = i * info->ecc_step_size;
ecc_offs = info->page_size + 4 + (i * (eccbytes + 4));
}
cnt = fread(buffer, 1, info->ecc_step_size, src);
if (!cnt && !feof(src)) {
fprintf(stderr,
"Failed to read data from the source\n");
return -1;
}
pad = info->ecc_step_size - cnt;
if (pad) {
if (info->scramble && info->boot0) {
size_t ret;
ret = fread(buffer + cnt, 1, pad, rnd);
if (!ret && !feof(rnd)) {
fprintf(stderr,
"Failed to read random data\n");
return -1;
}
} else {
memset(buffer + cnt, 0xff, pad);
}
}
memset(ecc, 0, eccbytes);
swap_bits(buffer, info->ecc_step_size + 4);
encode_bch(bch, buffer, info->ecc_step_size + 4, ecc);
swap_bits(buffer, info->ecc_step_size + 4);
swap_bits(ecc, eccbytes);
scramble(info, page, buffer, info->ecc_step_size + 4 + eccbytes);
fseek(dst, pos + data_offs, SEEK_SET);
fwrite(buffer, info->ecc_step_size, 1, dst);
fseek(dst, pos + ecc_offs - 4, SEEK_SET);
fwrite(ecc - 4, eccbytes + 4, 1, dst);
}
/* Fix BBM. */
fseek(dst, pos + info->page_size, SEEK_SET);
memset(buffer, 0xff, 2);
fwrite(buffer, 2, 1, dst);
/* Make dst pointer point to the next page. */
fseek(dst, pos + info->page_size + info->oob_size, SEEK_SET);
return 0;
}
static int create_image(const struct image_info *info)
{
off_t page = info->offset / info->page_size;
struct bch_control *bch;
FILE *src, *dst, *rnd;
uint8_t *buffer;
bch = init_bch(14, info->ecc_strength, BCH_PRIMITIVE_POLY);
if (!bch) {
fprintf(stderr, "Failed to init the BCH engine\n");
return -1;
}
buffer = malloc(info->page_size + info->oob_size);
if (!buffer) {
fprintf(stderr, "Failed to allocate the NAND page buffer\n");
return -1;
}
memset(buffer, 0xff, info->page_size + info->oob_size);
src = fopen(info->source, "r");
if (!src) {
fprintf(stderr, "Failed to open source file (%s)\n",
info->source);
return -1;
}
dst = fopen(info->dest, "w");
if (!dst) {
fprintf(stderr, "Failed to open dest file (%s)\n", info->dest);
return -1;
}
rnd = fopen("/dev/urandom", "r");
if (!rnd) {
fprintf(stderr, "Failed to open /dev/urandom\n");
return -1;
}
while (!feof(src)) {
int ret;
ret = write_page(info, buffer, src, rnd, dst, bch, page++);
if (ret)
return ret;
}
return 0;
}
static void display_help(int status)
{
fprintf(status == EXIT_SUCCESS ? stdout : stderr,
"sunxi-nand-image-builder %s\n"
"\n"
"Usage: sunxi-nand-image-builder [OPTIONS] source-image output-image\n"
"\n"
"Creates a raw NAND image that can be read by the sunxi NAND controller.\n"
"\n"
"-h --help Display this help and exit\n"
"-c <str>/<step> --ecc=<str>/<step> ECC config (strength/step-size)\n"
"-p <size> --page=<size> Page size\n"
"-o <size> --oob=<size> OOB size\n"
"-u <size> --usable=<size> Usable page size\n"
"-e <size> --eraseblock=<size> Erase block size\n"
"-b --boot0 Build a boot0 image.\n"
"-s --scramble Scramble data\n"
"-a <offset> --address=<offset> Where the image will be programmed.\n"
"\n"
"Notes:\n"
"All the information you need to pass to this tool should be part of\n"
"the NAND datasheet.\n"
"\n"
"The NAND controller only supports the following ECC configs\n"
" Valid ECC strengths: 16, 24, 28, 32, 40, 48, 56, 60 and 64\n"
" Valid ECC step size: 512 and 1024\n"
"\n"
"If you are building a boot0 image, you'll have specify extra options.\n"
"These options should be chosen based on the layouts described here:\n"
" http://linux-sunxi.org/NAND#More_information_on_BROM_NAND\n"
"\n"
" --usable should be assigned the 'Hardware page' value\n"
" --ecc should be assigned the 'ECC capacity'/'ECC page' values\n"
" --usable should be smaller than --page\n"
"\n"
"The --address option is only required for non-boot0 images that are \n"
"meant to be programmed at a non eraseblock aligned offset.\n"
"\n"
"Examples:\n"
" The H27UCG8T2BTR-BC NAND exposes\n"
" * 16k pages\n"
" * 1280 OOB bytes per page\n"
" * 4M eraseblocks\n"
" * requires data scrambling\n"
" * expects a minimum ECC of 40bits/1024bytes\n"
"\n"
" A normal image can be generated with\n"
" sunxi-nand-image-builder -p 16384 -o 1280 -e 0x400000 -s -c 40/1024\n"
" A boot0 image can be generated with\n"
" sunxi-nand-image-builder -p 16384 -o 1280 -e 0x400000 -s -b -u 4096 -c 64/1024\n",
PLAIN_VERSION);
exit(status);
}
static int check_image_info(struct image_info *info)
{
static int valid_ecc_strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
int eccbytes, eccsteps;
unsigned i;
if (!info->page_size) {
fprintf(stderr, "--page is missing\n");
return -EINVAL;
}
if (!info->page_size) {
fprintf(stderr, "--oob is missing\n");
return -EINVAL;
}
if (!info->eraseblock_size) {
fprintf(stderr, "--eraseblock is missing\n");
return -EINVAL;
}
if (info->ecc_step_size != 512 && info->ecc_step_size != 1024) {
fprintf(stderr, "Invalid ECC step argument: %d\n",
info->ecc_step_size);
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(valid_ecc_strengths); i++) {
if (valid_ecc_strengths[i] == info->ecc_strength)
break;
}
if (i == ARRAY_SIZE(valid_ecc_strengths)) {
fprintf(stderr, "Invalid ECC strength argument: %d\n",
info->ecc_strength);
return -EINVAL;
}
eccbytes = DIV_ROUND_UP(info->ecc_strength * 14, 8);
if (eccbytes % 2)
eccbytes++;
eccbytes += 4;
eccsteps = info->usable_page_size / info->ecc_step_size;
if (info->page_size + info->oob_size <
info->usable_page_size + (eccsteps * eccbytes)) {
fprintf(stderr,
"ECC bytes do not fit in the NAND page, choose a weaker ECC\n");
return -EINVAL;
}
return 0;
}
int main(int argc, char **argv)
{
struct image_info info;
memset(&info, 0, sizeof(info));
/*
* Process user arguments
*/
for (;;) {
int option_index = 0;
char *endptr = NULL;
static const struct option long_options[] = {
{"help", no_argument, 0, 'h'},
{"ecc", required_argument, 0, 'c'},
{"page", required_argument, 0, 'p'},
{"oob", required_argument, 0, 'o'},
{"usable", required_argument, 0, 'u'},
{"eraseblock", required_argument, 0, 'e'},
{"boot0", no_argument, 0, 'b'},
{"scramble", no_argument, 0, 's'},
{"address", required_argument, 0, 'a'},
{0, 0, 0, 0},
};
int c = getopt_long(argc, argv, "c:p:o:u:e:ba:sh",
long_options, &option_index);
if (c == EOF)
break;
switch (c) {
case 'h':
display_help(0);
break;
case 's':
info.scramble = 1;
break;
case 'c':
info.ecc_strength = strtol(optarg, &endptr, 0);
if (*endptr == '/')
info.ecc_step_size = strtol(endptr + 1, NULL, 0);
break;
case 'p':
info.page_size = strtol(optarg, NULL, 0);
break;
case 'o':
info.oob_size = strtol(optarg, NULL, 0);
break;
case 'u':
info.usable_page_size = strtol(optarg, NULL, 0);
break;
case 'e':
info.eraseblock_size = strtol(optarg, NULL, 0);
break;
case 'b':
info.boot0 = 1;
break;
case 'a':
info.offset = strtoull(optarg, NULL, 0);
break;
case '?':
display_help(-1);
break;
}
}
if ((argc - optind) != 2)
display_help(-1);
info.source = argv[optind];
info.dest = argv[optind + 1];
if (!info.boot0) {
info.usable_page_size = info.page_size;
} else if (!info.usable_page_size) {
if (info.page_size > 8192)
info.usable_page_size = 8192;
else if (info.page_size > 4096)
info.usable_page_size = 4096;
else
info.usable_page_size = 1024;
}
if (check_image_info(&info))
display_help(-1);
return create_image(&info);
}