arch/powerpc/cpu/mpc85xx/speed.c - u-boot - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2003 Motorola Inc.
  * Xianghua Xiao, (X.Xiao@motorola.com)
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  */

 #include <common.h>
 #include <ppc_asm.tmpl>
 #include <linux/compiler.h>
 #include <asm/processor.h>
 #include <asm/io.h>

 DECLARE_GLOBAL_DATA_PTR;


 #ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	6
 #endif
 /* --------------------------------------------------------------- */

 void get_sys_info(sys_info_t *sys_info)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #ifdef CONFIG_FSL_CORENET
 	volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
 	unsigned int cpu;
 #ifdef CONFIG_HETROGENOUS_CLUSTERS
 	unsigned int dsp_cpu;
 	uint rcw_tmp1, rcw_tmp2;
 #endif
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 	int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
 #endif
 	__maybe_unused u32 svr;

 	const u8 core_cplx_PLL[16] = {
 		[ 0] = 0,	/* CC1 PPL / 1 */
 		[ 1] = 0,	/* CC1 PPL / 2 */
 		[ 2] = 0,	/* CC1 PPL / 4 */
 		[ 4] = 1,	/* CC2 PPL / 1 */
 		[ 5] = 1,	/* CC2 PPL / 2 */
 		[ 6] = 1,	/* CC2 PPL / 4 */
 		[ 8] = 2,	/* CC3 PPL / 1 */
 		[ 9] = 2,	/* CC3 PPL / 2 */
 		[10] = 2,	/* CC3 PPL / 4 */
 		[12] = 3,	/* CC4 PPL / 1 */
 		[13] = 3,	/* CC4 PPL / 2 */
 		[14] = 3,	/* CC4 PPL / 4 */
 	};

 	const u8 core_cplx_pll_div[16] = {
 		[ 0] = 1,	/* CC1 PPL / 1 */
 		[ 1] = 2,	/* CC1 PPL / 2 */
 		[ 2] = 4,	/* CC1 PPL / 4 */
 		[ 4] = 1,	/* CC2 PPL / 1 */
 		[ 5] = 2,	/* CC2 PPL / 2 */
 		[ 6] = 4,	/* CC2 PPL / 4 */
 		[ 8] = 1,	/* CC3 PPL / 1 */
 		[ 9] = 2,	/* CC3 PPL / 2 */
 		[10] = 4,	/* CC3 PPL / 4 */
 		[12] = 1,	/* CC4 PPL / 1 */
 		[13] = 2,	/* CC4 PPL / 2 */
 		[14] = 4,	/* CC4 PPL / 4 */
 	};
 	uint i, freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 #if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV) || \
 	defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)
 	uint rcw_tmp;
 #endif
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;

 	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
 	uint ddr_refclk_sel;
 	unsigned int porsr1_sys_clk;
 	porsr1_sys_clk = in_be32(&gur->porsr1) >> FSL_DCFG_PORSR1_SYSCLK_SHIFT
 						& FSL_DCFG_PORSR1_SYSCLK_MASK;
 	if (porsr1_sys_clk == FSL_DCFG_PORSR1_SYSCLK_DIFF)
 		sys_info->diff_sysclk = 1;
 	else
 		sys_info->diff_sysclk = 0;

 	/*
 	 * DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
 	 * are driven by separate DDR Refclock or single source
 	 * differential clock.
 	 */
 	ddr_refclk_sel = (in_be32(&gur->rcwsr[5]) >>
 		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
 		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
 	/*
 	 * For single source clocking, both ddrclock and sysclock
 	 * are driven by differential sysclock.
 	 */
 	if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK)
 		sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
 	else
 #endif
 #ifdef CONFIG_DDR_CLK_FREQ
 		sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
 #else
 		sys_info->freq_ddrbus = sysclk;
 #endif

 	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
 	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
 			FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
 			& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 #ifdef CONFIG_SYS_FSL_ERRATUM_A007212
 	if (mem_pll_rat == 0) {
 		mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
 			FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
 			FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 	}
 #endif
 	/* T4240/T4160 Rev2.0 MEM_PLL_RAT uses a value which is half of
 	 * T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0
 	 * it uses 6.
 	 * T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
 	 */
 #if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) || \
 	defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
 	svr = get_svr();
 	switch (SVR_SOC_VER(svr)) {
 	case SVR_T4240:
 	case SVR_T4160:
 	case SVR_T4120:
 	case SVR_T4080:
 		if (SVR_MAJ(svr) >= 2)
 			mem_pll_rat *= 2;
 		break;
 	case SVR_T2080:
 	case SVR_T2081:
 		if ((SVR_MAJ(svr) > 1) || (SVR_MIN(svr) >= 1))
 			mem_pll_rat *= 2;
 		break;
 	default:
 		break;
 	}
 #endif
 	if (mem_pll_rat > 2)
 		sys_info->freq_ddrbus *= mem_pll_rat;
 	else
 		sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat;

 	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
 		ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
 		if (ratio[i] > 4)
 			freq_c_pll[i] = sysclk * ratio[i];
 		else
 			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
 	}

 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 	/*
 	 * As per CHASSIS2 architeture total 12 clusters are posible and
 	 * Each cluster has up to 4 cores, sharing the same PLL selection.
 	 * The cluster clock assignment is SoC defined.
 	 *
 	 * Total 4 clock groups are possible with 3 PLLs each.
 	 * as per array indices, clock group A has 0, 1, 2 numbered PLLs &
 	 * clock group B has 3, 4, 6 and so on.
 	 *
 	 * Clock group A having PLL1, PLL2, PLL3, feeding cores of any cluster
 	 * depends upon the SoC architeture. Same applies to other
 	 * clock groups and clusters.
 	 *
 	 */
 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
 		int cluster = fsl_qoriq_core_to_cluster(cpu);
 		u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
 				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
 		cplx_pll += cc_group[cluster] - 1;
 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}

 #ifdef CONFIG_HETROGENOUS_CLUSTERS
 	for_each_cpu(i, dsp_cpu, cpu_num_dspcores(), cpu_dsp_mask()) {
 		int dsp_cluster = fsl_qoriq_dsp_core_to_cluster(dsp_cpu);
 		u32 c_pll_sel = (in_be32
 				(&clk->clkcsr[dsp_cluster].clkcncsr) >> 27)
 				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
 		cplx_pll += cc_group[dsp_cluster] - 1;
 		sys_info->freq_processor_dsp[dsp_cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 #endif

 #if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
 	defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #elif defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
 #define FM1_CLK_SEL	0x00000007
 #define FM1_CLK_SHIFT	0
 #else
 #define PME_CLK_SEL	0xe0000000
 #define PME_CLK_SHIFT	29
 #define FM1_CLK_SEL	0x1c000000
 #define FM1_CLK_SHIFT	26
 #endif
 #if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
 #if defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
 	rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
 #else
 	rcw_tmp = in_be32(&gur->rcwsr[7]);
 #endif
 #endif

 #ifdef CONFIG_SYS_DPAA_PME
 #ifndef CONFIG_PME_PLAT_CLK_DIV
 	switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK];
 		break;
 	case 2:
 		sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 2;
 		break;
 	case 3:
 		sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 3;
 		break;
 	case 4:
 		sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 4;
 		break;
 	case 6:
 		sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 2;
 		break;
 	case 7:
 		sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 3;
 		break;
 	default:
 		printf("Error: Unknown PME clock select!\n");
 	case 0:
 		sys_info->freq_pme = sys_info->freq_systembus / 2;
 		break;

 	}
 #else
 	sys_info->freq_pme = sys_info->freq_systembus / CONFIG_SYS_PME_CLK;

 #endif
 #endif

 #ifdef CONFIG_SYS_DPAA_QBMAN
 #ifndef CONFIG_QBMAN_CLK_DIV
 #define CONFIG_QBMAN_CLK_DIV	2
 #endif
 	sys_info->freq_qman = sys_info->freq_systembus / CONFIG_QBMAN_CLK_DIV;
 #endif

 #if defined(CONFIG_SYS_MAPLE)
 #define CPRI_CLK_SEL		0x1C000000
 #define CPRI_CLK_SHIFT		26
 #define CPRI_ALT_CLK_SEL	0x00007000
 #define CPRI_ALT_CLK_SHIFT	12

 	rcw_tmp1 = in_be32(&gur->rcwsr[7]);	/* Reading RCW bits: 224-255*/
 	rcw_tmp2 = in_be32(&gur->rcwsr[15]);	/* Reading RCW bits: 480-511*/
 	/* For MAPLE and CPRI frequency */
 	switch ((rcw_tmp1 & CPRI_CLK_SEL) >> CPRI_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK];
 		sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK];
 		break;
 	case 2:
 		sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
 		sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
 		break;
 	case 3:
 		sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
 		sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
 		break;
 	case 4:
 		sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
 		sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
 		break;
 	case 5:
 		if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
 					>> CPRI_ALT_CLK_SHIFT) == 6) {
 			sys_info->freq_maple =
 				freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
 			sys_info->freq_cpri =
 				freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
 		}
 		if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
 					>> CPRI_ALT_CLK_SHIFT) == 7) {
 			sys_info->freq_maple =
 				freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
 			sys_info->freq_cpri =
 				freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
 		}
 		break;
 	case 6:
 		sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
 		sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
 		break;
 	case 7:
 		sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
 		sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
 		break;
 	default:
 		printf("Error: Unknown MAPLE/CPRI clock select!\n");
 	}

 	/* For MAPLE ULB and eTVPE frequencies */
 #define ULB_CLK_SEL		0x00000038
 #define ULB_CLK_SHIFT		3
 #define ETVPE_CLK_SEL		0x00000007
 #define ETVPE_CLK_SHIFT		0

 	switch ((rcw_tmp2 & ULB_CLK_SEL) >> ULB_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK];
 		break;
 	case 2:
 		sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 2;
 		break;
 	case 3:
 		sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 3;
 		break;
 	case 4:
 		sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 4;
 		break;
 	case 5:
 		sys_info->freq_maple_ulb = sys_info->freq_systembus;
 		break;
 	case 6:
 		sys_info->freq_maple_ulb =
 			freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 2;
 		break;
 	case 7:
 		sys_info->freq_maple_ulb =
 			freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 3;
 		break;
 	default:
 		printf("Error: Unknown MAPLE ULB clock select!\n");
 	}

 	switch ((rcw_tmp2 & ETVPE_CLK_SEL) >> ETVPE_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_maple_etvpe = freq_c_pll[CONFIG_SYS_ETVPE_CLK];
 		break;
 	case 2:
 		sys_info->freq_maple_etvpe =
 			freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 2;
 		break;
 	case 3:
 		sys_info->freq_maple_etvpe =
 			freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 3;
 		break;
 	case 4:
 		sys_info->freq_maple_etvpe =
 			freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 4;
 		break;
 	case 5:
 		sys_info->freq_maple_etvpe = sys_info->freq_systembus;
 		break;
 	case 6:
 		sys_info->freq_maple_etvpe =
 			freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 2;
 		break;
 	case 7:
 		sys_info->freq_maple_etvpe =
 			freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 3;
 		break;
 	default:
 		printf("Error: Unknown MAPLE eTVPE clock select!\n");
 	}

 #endif

 #ifdef CONFIG_SYS_DPAA_FMAN
 #ifndef CONFIG_FM_PLAT_CLK_DIV
 	switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK];
 		break;
 	case 2:
 		sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 2;
 		break;
 	case 3:
 		sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 3;
 		break;
 	case 4:
 		sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 4;
 		break;
 	case 5:
 		sys_info->freq_fman[0] = sys_info->freq_systembus;
 		break;
 	case 6:
 		sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 2;
 		break;
 	case 7:
 		sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 3;
 		break;
 	default:
 		printf("Error: Unknown FMan1 clock select!\n");
 	case 0:
 		sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
 		break;
 	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
 #ifdef CONFIG_SYS_FM2_CLK
 #define FM2_CLK_SEL	0x00000038
 #define FM2_CLK_SHIFT	3
 	rcw_tmp = in_be32(&gur->rcwsr[15]);
 	switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1];
 		break;
 	case 2:
 		sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 2;
 		break;
 	case 3:
 		sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 3;
 		break;
 	case 4:
 		sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 4;
 		break;
 	case 5:
 		sys_info->freq_fman[1] = sys_info->freq_systembus;
 		break;
 	case 6:
 		sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 2;
 		break;
 	case 7:
 		sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 3;
 		break;
 	default:
 		printf("Error: Unknown FMan2 clock select!\n");
 	case 0:
 		sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
 		break;
 	}
 #endif
 #endif	/* CONFIG_SYS_NUM_FMAN == 2 */
 #else
 	sys_info->freq_fman[0] = sys_info->freq_systembus / CONFIG_SYS_FM1_CLK;
 #endif
 #endif

 #ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #if defined(CONFIG_ARCH_T2080)
 #define ESDHC_CLK_SEL	0x00000007
 #define ESDHC_CLK_SHIFT	0
 #define ESDHC_CLK_RCWSR	15
 #else	/* Support T1040 T1024 by now */
 #define ESDHC_CLK_SEL	0xe0000000
 #define ESDHC_CLK_SHIFT	29
 #define ESDHC_CLK_RCWSR	7
 #endif
 	rcw_tmp = in_be32(&gur->rcwsr[ESDHC_CLK_RCWSR]);
 	switch ((rcw_tmp & ESDHC_CLK_SEL) >> ESDHC_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK];
 		break;
 	case 2:
 		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 2;
 		break;
 	case 3:
 		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 3;
 		break;
 #if defined(CONFIG_SYS_SDHC_CLK_2_PLL)
 	case 4:
 		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 4;
 		break;
 #if defined(CONFIG_ARCH_T2080)
 	case 5:
 		sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK];
 		break;
 #endif
 	case 6:
 		sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 2;
 		break;
 	case 7:
 		sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 3;
 		break;
 #endif
 	default:
 		sys_info->freq_sdhc = 0;
 		printf("Error: Unknown SDHC peripheral clock select!\n");
 	}
 #endif
 #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */

 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
 		u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
 				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];

 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 #define PME_CLK_SEL	0x80000000
 #define FM1_CLK_SEL	0x40000000
 #define FM2_CLK_SEL	0x20000000
 #define HWA_ASYNC_DIV	0x04000000
 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
 #define HWA_CC_PLL	1
 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
 #define HWA_CC_PLL	2
 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
 #define HWA_CC_PLL	2
 #else
 #error CONFIG_SYS_FSL_NUM_CC_PLLS not set or unknown case
 #endif
 	rcw_tmp = in_be32(&gur->rcwsr[7]);

 #ifdef CONFIG_SYS_DPAA_PME
 	if (rcw_tmp & PME_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
 			sys_info->freq_pme = freq_c_pll[HWA_CC_PLL] / 4;
 		else
 			sys_info->freq_pme = freq_c_pll[HWA_CC_PLL] / 2;
 	} else {
 		sys_info->freq_pme = sys_info->freq_systembus / 2;
 	}
 #endif

 #ifdef CONFIG_SYS_DPAA_FMAN
 	if (rcw_tmp & FM1_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
 			sys_info->freq_fman[0] = freq_c_pll[HWA_CC_PLL] / 4;
 		else
 			sys_info->freq_fman[0] = freq_c_pll[HWA_CC_PLL] / 2;
 	} else {
 		sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
 	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
 	if (rcw_tmp & FM2_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
 			sys_info->freq_fman[1] = freq_c_pll[HWA_CC_PLL] / 4;
 		else
 			sys_info->freq_fman[1] = freq_c_pll[HWA_CC_PLL] / 2;
 	} else {
 		sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
 	}
 #endif
 #endif

 #ifdef CONFIG_SYS_DPAA_QBMAN
 	sys_info->freq_qman = sys_info->freq_systembus / 2;
 #endif

 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */

 #ifdef CONFIG_U_QE
 	sys_info->freq_qe =  sys_info->freq_systembus / 2;
 #endif

 #else /* CONFIG_FSL_CORENET */
 	uint plat_ratio, e500_ratio, half_freq_systembus;
 	int i;
 #ifdef CONFIG_QE
 	__maybe_unused u32 qe_ratio;
 #endif

 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
 	sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;

 	/* Divide before multiply to avoid integer
 	 * overflow for processor speeds above 2GHz */
 	half_freq_systembus = sys_info->freq_systembus/2;
 	for (i = 0; i < cpu_numcores(); i++) {
 		e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
 		sys_info->freq_processor[i] = e500_ratio * half_freq_systembus;
 	}

 	/* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
 	sys_info->freq_ddrbus = sys_info->freq_systembus;

 #ifdef CONFIG_DDR_CLK_FREQ
 	{
 		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
 			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
 			sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
 #endif

 #ifdef CONFIG_QE
 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
 	sys_info->freq_qe =  sys_info->freq_systembus;
 #else
 	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
 			>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
 	sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
 #endif
 #endif

 #ifdef CONFIG_SYS_DPAA_FMAN
 		sys_info->freq_fman[0] = sys_info->freq_systembus;
 #endif

 #endif /* CONFIG_FSL_CORENET */

 #if defined(CONFIG_FSL_LBC)
 	sys_info->freq_localbus = sys_info->freq_systembus /
 						CONFIG_SYS_FSL_LBC_CLK_DIV;
 #endif

 #if defined(CONFIG_FSL_IFC)
 	sys_info->freq_localbus = sys_info->freq_systembus /
 						CONFIG_SYS_FSL_IFC_CLK_DIV;
 #endif
 }


 int get_clocks (void)
 {
 	sys_info_t sys_info;
 #ifdef CONFIG_ARCH_MPC8544
 	volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
 #endif
 #if defined(CONFIG_CPM2)
 	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	uint sccr, dfbrg;

 	/* set VCO = 4 * BRG */
 	cpm->im_cpm_intctl.sccr &= 0xfffffffc;
 	sccr = cpm->im_cpm_intctl.sccr;
 	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
 #endif
 	get_sys_info (&sys_info);
 	gd->cpu_clk = sys_info.freq_processor[0];
 	gd->bus_clk = sys_info.freq_systembus;
 	gd->mem_clk = sys_info.freq_ddrbus;
 	gd->arch.lbc_clk = sys_info.freq_localbus;

 #ifdef CONFIG_QE
 	gd->arch.qe_clk = sys_info.freq_qe;
 	gd->arch.brg_clk = gd->arch.qe_clk / 2;
 #endif
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
 	 * there is no pattern that can be used to determine the frequency, so
 	 * the only choice is to look up the actual SOC number and use the value
 	 * for that SOC. This information is taken from application note
 	 * AN2919.
 	 */
 #if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8541) || \
 	defined(CONFIG_ARCH_MPC8560) || defined(CONFIG_ARCH_MPC8555) || \
 	defined(CONFIG_ARCH_P1022)
 	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #elif defined(CONFIG_ARCH_MPC8544)
 	/*
 	 * On the 8544, the I2C clock is the same as the SEC clock.  This can be
 	 * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
 	 * 4.4.3.3 of the 8544 RM.  Note that this might actually work for all
 	 * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
 	 * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
 	 */
 	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
 		gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
 	else
 		gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #else
 	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
 	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #endif
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;

 #if defined(CONFIG_FSL_ESDHC)
 #ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 	gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
 #else
 #if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010)
 	gd->arch.sdhc_clk = gd->bus_clk;
 #else
 	gd->arch.sdhc_clk = gd->bus_clk / 2;
 #endif
 #endif
 #endif /* defined(CONFIG_FSL_ESDHC) */

 #if defined(CONFIG_CPM2)
 	gd->arch.vco_out = 2*sys_info.freq_systembus;
 	gd->arch.cpm_clk = gd->arch.vco_out / 2;
 	gd->arch.scc_clk = gd->arch.vco_out / 4;
 	gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
 #endif

 	if(gd->cpu_clk != 0) return (0);
 	else return (1);
 }


 /********************************************
  * get_bus_freq
  * return system bus freq in Hz
  *********************************************/
 ulong get_bus_freq (ulong dummy)
 {
 	return gd->bus_clk;
 }

 /********************************************
  * get_ddr_freq
  * return ddr bus freq in Hz
  *********************************************/
 ulong get_ddr_freq (ulong dummy)
 {
 	return gd->mem_clk;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
	*
	* (C) Copyright 2003 Motorola Inc.
	* Xianghua Xiao, (X.Xiao@motorola.com)
	*
	* (C) Copyright 2000
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*/

	#include <common.h>
	#include <ppc_asm.tmpl>
	#include <linux/compiler.h>
	#include <asm/processor.h>
	#include <asm/io.h>

	DECLARE_GLOBAL_DATA_PTR;


	#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
	#define CONFIG_SYS_FSL_NUM_CC_PLLS 6
	#endif
	/* --------------------------------------------------------------- */

	void get_sys_info(sys_info_t *sys_info)
	{
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	#ifdef CONFIG_FSL_CORENET
	volatile ccsr_clk_t clk = (void )(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
	unsigned int cpu;
	#ifdef CONFIG_HETROGENOUS_CLUSTERS
	unsigned int dsp_cpu;
	uint rcw_tmp1, rcw_tmp2;
	#endif
	#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
	int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
	#endif
	__maybe_unused u32 svr;

	const u8 core_cplx_PLL[16] = {
	[ 0] = 0, /* CC1 PPL / 1 */
	[ 1] = 0, /* CC1 PPL / 2 */
	[ 2] = 0, /* CC1 PPL / 4 */
	[ 4] = 1, /* CC2 PPL / 1 */
	[ 5] = 1, /* CC2 PPL / 2 */
	[ 6] = 1, /* CC2 PPL / 4 */
	[ 8] = 2, /* CC3 PPL / 1 */
	[ 9] = 2, /* CC3 PPL / 2 */
	[10] = 2, /* CC3 PPL / 4 */
	[12] = 3, /* CC4 PPL / 1 */
	[13] = 3, /* CC4 PPL / 2 */
	[14] = 3, /* CC4 PPL / 4 */
	};

	const u8 core_cplx_pll_div[16] = {
	[ 0] = 1, /* CC1 PPL / 1 */
	[ 1] = 2, /* CC1 PPL / 2 */
	[ 2] = 4, /* CC1 PPL / 4 */
	[ 4] = 1, /* CC2 PPL / 1 */
	[ 5] = 2, /* CC2 PPL / 2 */
	[ 6] = 4, /* CC2 PPL / 4 */
	[ 8] = 1, /* CC3 PPL / 1 */
	[ 9] = 2, /* CC3 PPL / 2 */
	[10] = 4, /* CC3 PPL / 4 */
	[12] = 1, /* CC4 PPL / 1 */
	[13] = 2, /* CC4 PPL / 2 */
	[14] = 4, /* CC4 PPL / 4 */
	};
	uint i, freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
	#if !defined(CONFIG_FM_PLAT_CLK_DIV) \|\| !defined(CONFIG_PME_PLAT_CLK_DIV) \|\| \
	defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)
	uint rcw_tmp;
	#endif
	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
	uint mem_pll_rat;

	sys_info->freq_systembus = sysclk;
	#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
	uint ddr_refclk_sel;
	unsigned int porsr1_sys_clk;
	porsr1_sys_clk = in_be32(&gur->porsr1) >> FSL_DCFG_PORSR1_SYSCLK_SHIFT
	& FSL_DCFG_PORSR1_SYSCLK_MASK;
	if (porsr1_sys_clk == FSL_DCFG_PORSR1_SYSCLK_DIFF)
	sys_info->diff_sysclk = 1;
	else
	sys_info->diff_sysclk = 0;

	/*
	* DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
	* are driven by separate DDR Refclock or single source
	* differential clock.
	*/
	ddr_refclk_sel = (in_be32(&gur->rcwsr[5]) >>
	FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
	FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
	/*
	* For single source clocking, both ddrclock and sysclock
	* are driven by differential sysclock.
	*/
	if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK)
	sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
	else
	#endif
	#ifdef CONFIG_DDR_CLK_FREQ
	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
	#else
	sys_info->freq_ddrbus = sysclk;
	#endif

	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
	FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
	& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
	#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
	if (mem_pll_rat == 0) {
	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
	FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
	FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
	}
	#endif
	/* T4240/T4160 Rev2.0 MEM_PLL_RAT uses a value which is half of
	* T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0
	* it uses 6.
	* T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
	*/
	#if defined(CONFIG_ARCH_T4240) \|\| defined(CONFIG_ARCH_T4160) \|\| \
	defined(CONFIG_ARCH_T2080) \|\| defined(CONFIG_ARCH_T2081)
	svr = get_svr();
	switch (SVR_SOC_VER(svr)) {
	case SVR_T4240:
	case SVR_T4160:
	case SVR_T4120:
	case SVR_T4080:
	if (SVR_MAJ(svr) >= 2)
	mem_pll_rat *= 2;
	break;
	case SVR_T2080:
	case SVR_T2081:
	if ((SVR_MAJ(svr) > 1) \|\| (SVR_MIN(svr) >= 1))
	mem_pll_rat *= 2;
	break;
	default:
	break;
	}
	#endif
	if (mem_pll_rat > 2)
	sys_info->freq_ddrbus *= mem_pll_rat;
	else
	sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat;

	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
	ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
	if (ratio[i] > 4)
	freq_c_pll[i] = sysclk * ratio[i];
	else
	freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
	}

	#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
	/*
	* As per CHASSIS2 architeture total 12 clusters are posible and
	* Each cluster has up to 4 cores, sharing the same PLL selection.
	* The cluster clock assignment is SoC defined.
	*
	* Total 4 clock groups are possible with 3 PLLs each.
	* as per array indices, clock group A has 0, 1, 2 numbered PLLs &
	* clock group B has 3, 4, 6 and so on.
	*
	* Clock group A having PLL1, PLL2, PLL3, feeding cores of any cluster
	* depends upon the SoC architeture. Same applies to other
	* clock groups and clusters.
	*
	*/
	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
	int cluster = fsl_qoriq_core_to_cluster(cpu);
	u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
	& 0xf;
	u32 cplx_pll = core_cplx_PLL[c_pll_sel];
	cplx_pll += cc_group[cluster] - 1;
	sys_info->freq_processor[cpu] =
	freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
	}

	#ifdef CONFIG_HETROGENOUS_CLUSTERS
	for_each_cpu(i, dsp_cpu, cpu_num_dspcores(), cpu_dsp_mask()) {
	int dsp_cluster = fsl_qoriq_dsp_core_to_cluster(dsp_cpu);
	u32 c_pll_sel = (in_be32
	(&clk->clkcsr[dsp_cluster].clkcncsr) >> 27)
	& 0xf;
	u32 cplx_pll = core_cplx_PLL[c_pll_sel];
	cplx_pll += cc_group[dsp_cluster] - 1;
	sys_info->freq_processor_dsp[dsp_cpu] =
	freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
	}
	#endif

	#if defined(CONFIG_ARCH_B4860) \|\| defined(CONFIG_ARCH_B4420) \|\| \
	defined(CONFIG_ARCH_T2080) \|\| defined(CONFIG_ARCH_T2081)
	#define FM1_CLK_SEL 0xe0000000
	#define FM1_CLK_SHIFT 29
	#elif defined(CONFIG_ARCH_T1024) \|\| defined(CONFIG_ARCH_T1023)
	#define FM1_CLK_SEL 0x00000007
	#define FM1_CLK_SHIFT 0
	#else
	#define PME_CLK_SEL 0xe0000000
	#define PME_CLK_SHIFT 29
	#define FM1_CLK_SEL 0x1c000000
	#define FM1_CLK_SHIFT 26
	#endif
	#if !defined(CONFIG_FM_PLAT_CLK_DIV) \|\| !defined(CONFIG_PME_PLAT_CLK_DIV)
	#if defined(CONFIG_ARCH_T1024) \|\| defined(CONFIG_ARCH_T1023)
	rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
	#else
	rcw_tmp = in_be32(&gur->rcwsr[7]);
	#endif
	#endif

	#ifdef CONFIG_SYS_DPAA_PME
	#ifndef CONFIG_PME_PLAT_CLK_DIV
	switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
	case 1:
	sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK];
	break;
	case 2:
	sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 2;
	break;
	case 3:
	sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 3;
	break;
	case 4:
	sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 4;
	break;
	case 6:
	sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 2;
	break;
	case 7:
	sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 3;
	break;
	default:
	printf("Error: Unknown PME clock select!\n");
	case 0:
	sys_info->freq_pme = sys_info->freq_systembus / 2;
	break;

	}
	#else
	sys_info->freq_pme = sys_info->freq_systembus / CONFIG_SYS_PME_CLK;

	#endif
	#endif

	#ifdef CONFIG_SYS_DPAA_QBMAN
	#ifndef CONFIG_QBMAN_CLK_DIV
	#define CONFIG_QBMAN_CLK_DIV 2
	#endif
	sys_info->freq_qman = sys_info->freq_systembus / CONFIG_QBMAN_CLK_DIV;
	#endif

	#if defined(CONFIG_SYS_MAPLE)
	#define CPRI_CLK_SEL 0x1C000000
	#define CPRI_CLK_SHIFT 26
	#define CPRI_ALT_CLK_SEL 0x00007000
	#define CPRI_ALT_CLK_SHIFT 12

	rcw_tmp1 = in_be32(&gur->rcwsr[7]); /* Reading RCW bits: 224-255*/
	rcw_tmp2 = in_be32(&gur->rcwsr[15]); /* Reading RCW bits: 480-511*/
	/* For MAPLE and CPRI frequency */
	switch ((rcw_tmp1 & CPRI_CLK_SEL) >> CPRI_CLK_SHIFT) {
	case 1:
	sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK];
	sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK];
	break;
	case 2:
	sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
	sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
	break;
	case 3:
	sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
	sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
	break;
	case 4:
	sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
	sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
	break;
	case 5:
	if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
	>> CPRI_ALT_CLK_SHIFT) == 6) {
	sys_info->freq_maple =
	freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
	sys_info->freq_cpri =
	freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
	}
	if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
	>> CPRI_ALT_CLK_SHIFT) == 7) {
	sys_info->freq_maple =
	freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
	sys_info->freq_cpri =
	freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
	}
	break;
	case 6:
	sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
	sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
	break;
	case 7:
	sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
	sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
	break;
	default:
	printf("Error: Unknown MAPLE/CPRI clock select!\n");
	}

	/* For MAPLE ULB and eTVPE frequencies */
	#define ULB_CLK_SEL 0x00000038
	#define ULB_CLK_SHIFT 3
	#define ETVPE_CLK_SEL 0x00000007
	#define ETVPE_CLK_SHIFT 0

	switch ((rcw_tmp2 & ULB_CLK_SEL) >> ULB_CLK_SHIFT) {
	case 1:
	sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK];
	break;
	case 2:
	sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 2;
	break;
	case 3:
	sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 3;
	break;
	case 4:
	sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 4;
	break;
	case 5:
	sys_info->freq_maple_ulb = sys_info->freq_systembus;
	break;
	case 6:
	sys_info->freq_maple_ulb =
	freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 2;
	break;
	case 7:
	sys_info->freq_maple_ulb =
	freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 3;
	break;
	default:
	printf("Error: Unknown MAPLE ULB clock select!\n");
	}

	switch ((rcw_tmp2 & ETVPE_CLK_SEL) >> ETVPE_CLK_SHIFT) {
	case 1:
	sys_info->freq_maple_etvpe = freq_c_pll[CONFIG_SYS_ETVPE_CLK];
	break;
	case 2:
	sys_info->freq_maple_etvpe =
	freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 2;
	break;
	case 3:
	sys_info->freq_maple_etvpe =
	freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 3;
	break;
	case 4:
	sys_info->freq_maple_etvpe =
	freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 4;
	break;
	case 5:
	sys_info->freq_maple_etvpe = sys_info->freq_systembus;
	break;
	case 6:
	sys_info->freq_maple_etvpe =
	freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 2;
	break;
	case 7:
	sys_info->freq_maple_etvpe =
	freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 3;
	break;
	default:
	printf("Error: Unknown MAPLE eTVPE clock select!\n");
	}

	#endif

	#ifdef CONFIG_SYS_DPAA_FMAN
	#ifndef CONFIG_FM_PLAT_CLK_DIV
	switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
	case 1:
	sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK];
	break;
	case 2:
	sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 2;
	break;
	case 3:
	sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 3;
	break;
	case 4:
	sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 4;
	break;
	case 5:
	sys_info->freq_fman[0] = sys_info->freq_systembus;
	break;
	case 6:
	sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 2;
	break;
	case 7:
	sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 3;
	break;
	default:
	printf("Error: Unknown FMan1 clock select!\n");
	case 0:
	sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
	break;
	}
	#if (CONFIG_SYS_NUM_FMAN) == 2
	#ifdef CONFIG_SYS_FM2_CLK
	#define FM2_CLK_SEL 0x00000038
	#define FM2_CLK_SHIFT 3
	rcw_tmp = in_be32(&gur->rcwsr[15]);
	switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
	case 1:
	sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1];
	break;
	case 2:
	sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 2;
	break;
	case 3:
	sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 3;
	break;
	case 4:
	sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 4;
	break;
	case 5:
	sys_info->freq_fman[1] = sys_info->freq_systembus;
	break;
	case 6:
	sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 2;
	break;
	case 7:
	sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 3;
	break;
	default:
	printf("Error: Unknown FMan2 clock select!\n");
	case 0:
	sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
	break;
	}
	#endif
	#endif /* CONFIG_SYS_NUM_FMAN == 2 */
	#else
	sys_info->freq_fman[0] = sys_info->freq_systembus / CONFIG_SYS_FM1_CLK;
	#endif
	#endif

	#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
	#if defined(CONFIG_ARCH_T2080)
	#define ESDHC_CLK_SEL 0x00000007
	#define ESDHC_CLK_SHIFT 0
	#define ESDHC_CLK_RCWSR 15
	#else /* Support T1040 T1024 by now */
	#define ESDHC_CLK_SEL 0xe0000000
	#define ESDHC_CLK_SHIFT 29
	#define ESDHC_CLK_RCWSR 7
	#endif
	rcw_tmp = in_be32(&gur->rcwsr[ESDHC_CLK_RCWSR]);
	switch ((rcw_tmp & ESDHC_CLK_SEL) >> ESDHC_CLK_SHIFT) {
	case 1:
	sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK];
	break;
	case 2:
	sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 2;
	break;
	case 3:
	sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 3;
	break;
	#if defined(CONFIG_SYS_SDHC_CLK_2_PLL)
	case 4:
	sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 4;
	break;
	#if defined(CONFIG_ARCH_T2080)
	case 5:
	sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK];
	break;
	#endif
	case 6:
	sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 2;
	break;
	case 7:
	sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 3;
	break;
	#endif
	default:
	sys_info->freq_sdhc = 0;
	printf("Error: Unknown SDHC peripheral clock select!\n");
	}
	#endif
	#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */

	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
	u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
	& 0xf;
	u32 cplx_pll = core_cplx_PLL[c_pll_sel];

	sys_info->freq_processor[cpu] =
	freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
	}
	#define PME_CLK_SEL 0x80000000
	#define FM1_CLK_SEL 0x40000000
	#define FM2_CLK_SEL 0x20000000
	#define HWA_ASYNC_DIV 0x04000000
	#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
	#define HWA_CC_PLL 1
	#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
	#define HWA_CC_PLL 2
	#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
	#define HWA_CC_PLL 2
	#else
	#error CONFIG_SYS_FSL_NUM_CC_PLLS not set or unknown case
	#endif
	rcw_tmp = in_be32(&gur->rcwsr[7]);

	#ifdef CONFIG_SYS_DPAA_PME
	if (rcw_tmp & PME_CLK_SEL) {
	if (rcw_tmp & HWA_ASYNC_DIV)
	sys_info->freq_pme = freq_c_pll[HWA_CC_PLL] / 4;
	else
	sys_info->freq_pme = freq_c_pll[HWA_CC_PLL] / 2;
	} else {
	sys_info->freq_pme = sys_info->freq_systembus / 2;
	}
	#endif

	#ifdef CONFIG_SYS_DPAA_FMAN
	if (rcw_tmp & FM1_CLK_SEL) {
	if (rcw_tmp & HWA_ASYNC_DIV)
	sys_info->freq_fman[0] = freq_c_pll[HWA_CC_PLL] / 4;
	else
	sys_info->freq_fman[0] = freq_c_pll[HWA_CC_PLL] / 2;
	} else {
	sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
	}
	#if (CONFIG_SYS_NUM_FMAN) == 2
	if (rcw_tmp & FM2_CLK_SEL) {
	if (rcw_tmp & HWA_ASYNC_DIV)
	sys_info->freq_fman[1] = freq_c_pll[HWA_CC_PLL] / 4;
	else
	sys_info->freq_fman[1] = freq_c_pll[HWA_CC_PLL] / 2;
	} else {
	sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
	}
	#endif
	#endif

	#ifdef CONFIG_SYS_DPAA_QBMAN
	sys_info->freq_qman = sys_info->freq_systembus / 2;
	#endif

	#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */

	#ifdef CONFIG_U_QE
	sys_info->freq_qe = sys_info->freq_systembus / 2;
	#endif

	#else /* CONFIG_FSL_CORENET */
	uint plat_ratio, e500_ratio, half_freq_systembus;
	int i;
	#ifdef CONFIG_QE
	__maybe_unused u32 qe_ratio;
	#endif

	plat_ratio = (gur->porpllsr) & 0x0000003e;
	plat_ratio >>= 1;
	sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;

	/* Divide before multiply to avoid integer
	* overflow for processor speeds above 2GHz */
	half_freq_systembus = sys_info->freq_systembus/2;
	for (i = 0; i < cpu_numcores(); i++) {
	e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
	sys_info->freq_processor[i] = e500_ratio * half_freq_systembus;
	}

	/* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
	sys_info->freq_ddrbus = sys_info->freq_systembus;

	#ifdef CONFIG_DDR_CLK_FREQ
	{
	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
	>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
	if (ddr_ratio != 0x7)
	sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
	}
	#endif

	#ifdef CONFIG_QE
	#if defined(CONFIG_ARCH_P1021) \|\| defined(CONFIG_ARCH_P1025)
	sys_info->freq_qe = sys_info->freq_systembus;
	#else
	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
	>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
	sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
	#endif
	#endif

	#ifdef CONFIG_SYS_DPAA_FMAN
	sys_info->freq_fman[0] = sys_info->freq_systembus;
	#endif

	#endif /* CONFIG_FSL_CORENET */

	#if defined(CONFIG_FSL_LBC)
	sys_info->freq_localbus = sys_info->freq_systembus /
	CONFIG_SYS_FSL_LBC_CLK_DIV;
	#endif

	#if defined(CONFIG_FSL_IFC)
	sys_info->freq_localbus = sys_info->freq_systembus /
	CONFIG_SYS_FSL_IFC_CLK_DIV;
	#endif
	}


	int get_clocks (void)
	{
	sys_info_t sys_info;
	#ifdef CONFIG_ARCH_MPC8544
	volatile ccsr_gur_t gur = (void ) CONFIG_SYS_MPC85xx_GUTS_ADDR;
	#endif
	#if defined(CONFIG_CPM2)
	volatile ccsr_cpm_t cpm = (ccsr_cpm_t )CONFIG_SYS_MPC85xx_CPM_ADDR;
	uint sccr, dfbrg;

	/* set VCO = 4 * BRG */
	cpm->im_cpm_intctl.sccr &= 0xfffffffc;
	sccr = cpm->im_cpm_intctl.sccr;
	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
	#endif
	get_sys_info (&sys_info);
	gd->cpu_clk = sys_info.freq_processor[0];
	gd->bus_clk = sys_info.freq_systembus;
	gd->mem_clk = sys_info.freq_ddrbus;
	gd->arch.lbc_clk = sys_info.freq_localbus;

	#ifdef CONFIG_QE
	gd->arch.qe_clk = sys_info.freq_qe;
	gd->arch.brg_clk = gd->arch.qe_clk / 2;
	#endif
	/*
	* The base clock for I2C depends on the actual SOC. Unfortunately,
	* there is no pattern that can be used to determine the frequency, so
	* the only choice is to look up the actual SOC number and use the value
	* for that SOC. This information is taken from application note
	* AN2919.
	*/
	#if defined(CONFIG_ARCH_MPC8540) \|\| defined(CONFIG_ARCH_MPC8541) \|\| \
	defined(CONFIG_ARCH_MPC8560) \|\| defined(CONFIG_ARCH_MPC8555) \|\| \
	defined(CONFIG_ARCH_P1022)
	gd->arch.i2c1_clk = sys_info.freq_systembus;
	#elif defined(CONFIG_ARCH_MPC8544)
	/*
	* On the 8544, the I2C clock is the same as the SEC clock. This can be
	* either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
	* 4.4.3.3 of the 8544 RM. Note that this might actually work for all
	* 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
	* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
	*/
	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
	gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
	else
	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
	#else
	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
	#endif
	gd->arch.i2c2_clk = gd->arch.i2c1_clk;

	#if defined(CONFIG_FSL_ESDHC)
	#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
	gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
	#else
	#if defined(CONFIG_ARCH_MPC8569) \|\| defined(CONFIG_ARCH_P1010)
	gd->arch.sdhc_clk = gd->bus_clk;
	#else
	gd->arch.sdhc_clk = gd->bus_clk / 2;
	#endif
	#endif
	#endif /* defined(CONFIG_FSL_ESDHC) */

	#if defined(CONFIG_CPM2)
	gd->arch.vco_out = 2*sys_info.freq_systembus;
	gd->arch.cpm_clk = gd->arch.vco_out / 2;
	gd->arch.scc_clk = gd->arch.vco_out / 4;
	gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
	#endif

	if(gd->cpu_clk != 0) return (0);
	else return (1);
	}


	/********************************************
	* get_bus_freq
	* return system bus freq in Hz
	*********************************************/
	ulong get_bus_freq (ulong dummy)
	{
	return gd->bus_clk;
	}

	/********************************************
	* get_ddr_freq
	* return ddr bus freq in Hz
	*********************************************/
	ulong get_ddr_freq (ulong dummy)
	{
	return gd->mem_clk;
	}