blob: 7d290740bfa873bdb45176e7232bdd729e72a87e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016 Google, Inc
*/
#include <common.h>
#include <debug_uart.h>
#include <spl.h>
#include <asm/cpu.h>
#include <asm/mtrr.h>
#include <asm/processor.h>
#include <asm-generic/sections.h>
DECLARE_GLOBAL_DATA_PTR;
__weak int arch_cpu_init_dm(void)
{
return 0;
}
static int x86_spl_init(void)
{
/*
* TODO(sjg@chromium.org): We use this area of RAM for the stack
* and global_data in SPL. Once U-Boot starts up and releocates it
* is not needed. We could make this a CONFIG option or perhaps
* place it immediately below CONFIG_SYS_TEXT_BASE.
*/
char *ptr = (char *)0x110000;
int ret;
debug("%s starting\n", __func__);
ret = spl_init();
if (ret) {
debug("%s: spl_init() failed\n", __func__);
return ret;
}
ret = arch_cpu_init();
if (ret) {
debug("%s: arch_cpu_init() failed\n", __func__);
return ret;
}
ret = arch_cpu_init_dm();
if (ret) {
debug("%s: arch_cpu_init_dm() failed\n", __func__);
return ret;
}
preloader_console_init();
ret = print_cpuinfo();
if (ret) {
debug("%s: print_cpuinfo() failed\n", __func__);
return ret;
}
ret = dram_init();
if (ret) {
debug("%s: dram_init() failed\n", __func__);
return ret;
}
memset(&__bss_start, 0, (ulong)&__bss_end - (ulong)&__bss_start);
/* TODO(sjg@chromium.org): Consider calling cpu_init_r() here */
ret = interrupt_init();
if (ret) {
debug("%s: interrupt_init() failed\n", __func__);
return ret;
}
/*
* The stack grows down from ptr. Put the global data at ptr. This
* will only be used for SPL. Once SPL loads U-Boot proper it will
* set up its own stack.
*/
gd->new_gd = (struct global_data *)ptr;
memcpy(gd->new_gd, gd, sizeof(*gd));
arch_setup_gd(gd->new_gd);
gd->start_addr_sp = (ulong)ptr;
/* Cache the SPI flash. Otherwise copying the code to RAM takes ages */
ret = mtrr_add_request(MTRR_TYPE_WRBACK,
(1ULL << 32) - CONFIG_XIP_ROM_SIZE,
CONFIG_XIP_ROM_SIZE);
if (ret) {
debug("%s: SPI cache setup failed\n", __func__);
return ret;
}
return 0;
}
void board_init_f(ulong flags)
{
int ret;
ret = x86_spl_init();
if (ret) {
debug("Error %d\n", ret);
hang();
}
/* Uninit CAR and jump to board_init_f_r() */
board_init_f_r_trampoline(gd->start_addr_sp);
}
void board_init_f_r(void)
{
init_cache_f_r();
gd->flags &= ~GD_FLG_SERIAL_READY;
debug("cache status %d\n", dcache_status());
board_init_r(gd, 0);
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_BOARD;
}
int spl_start_uboot(void)
{
return 0;
}
void spl_board_announce_boot_device(void)
{
printf("SPI flash");
}
static int spl_board_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
spl_image->size = CONFIG_SYS_MONITOR_LEN;
spl_image->entry_point = CONFIG_SYS_TEXT_BASE;
spl_image->load_addr = CONFIG_SYS_TEXT_BASE;
spl_image->os = IH_OS_U_BOOT;
spl_image->name = "U-Boot";
debug("Loading to %lx\n", spl_image->load_addr);
return 0;
}
SPL_LOAD_IMAGE_METHOD("SPI", 0, BOOT_DEVICE_BOARD, spl_board_load_image);
int spl_spi_load_image(void)
{
return -EPERM;
}
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
int ret;
printf("Jumping to 64-bit U-Boot: Note many features are missing\n");
ret = cpu_jump_to_64bit_uboot(spl_image->entry_point);
debug("ret=%d\n", ret);
while (1)
;
}