blob: 0c36ded86275feb7333252ab86fbf4ec9e05a169 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com>
*
* Copyright 2007 Embedded Specialties, Inc.
*
* Copyright 2004, 2007 Freescale Semiconductor.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*/
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <spd_sdram.h>
#include <netdev.h>
#include <tsec.h>
#include <miiphy.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
void local_bus_init(void);
int board_early_init_f (void)
{
return 0;
}
int checkboard (void)
{
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile u_char *rev= (void *)CONFIG_SYS_BD_REV;
printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
in_8(rev) >> 4);
/*
* Initialize local bus.
*/
local_bus_init ();
out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */
out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */
return 0;
}
/*
* Initialize Local Bus
*/
void
local_bus_init(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv, lbc_mhz, lcrr = CONFIG_SYS_LBC_LCRR;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
lbc_mhz = sysinfo.freq_localbus / 1000000;
clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus;
debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
out_be32(&gur->lbiuiplldcr1, 0x00078080);
if (clkdiv == 16) {
out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
} else if (clkdiv == 8) {
out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
} else if (clkdiv == 4) {
out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
}
/*
* Local Bus Clock > 83.3 MHz. According to timing
* specifications set LCRR[EADC] to 2 delay cycles.
*/
if (lbc_mhz > 83) {
lcrr &= ~LCRR_EADC;
lcrr |= LCRR_EADC_2;
}
/*
* According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
* disable PLL bypass for Local Bus Clock > 83 MHz.
*/
if (lbc_mhz >= 66)
lcrr &= (~LCRR_DBYP); /* DLL Enabled */
else
lcrr |= LCRR_DBYP; /* DLL Bypass */
out_be32(&lbc->lcrr, lcrr);
asm("sync;isync;msync");
/*
* According to MPC8548ERMAD Rev.1.3 read back LCRR
* and terminate with isync
*/
lcrr = in_be32(&lbc->lcrr);
asm ("isync;");
/* let DLL stabilize */
udelay(500);
out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
}
/*
* Initialize SDRAM memory on the Local Bus.
*/
void lbc_sdram_init(void)
{
#if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
uint idx;
const unsigned long size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
uint *sdram_addr2 = (uint *)(CONFIG_SYS_LBC_SDRAM_BASE + size/2);
puts(" SDRAM: ");
print_size(size, "\n");
/*
* Setup SDRAM Base and Option Registers
*/
set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
asm("msync");
out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT);
out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
asm("msync");
/*
* Issue PRECHARGE ALL command.
*/
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_PCHALL);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(100);
/*
* Issue 8 AUTO REFRESH commands.
*/
for (idx = 0; idx < 8; idx++) {
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_ARFRSH);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(100);
}
/*
* Issue 8 MODE-set command.
*/
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_MRW);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(100);
/*
* Issue RFEN command.
*/
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_RFEN);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(200); /* Overkill. Must wait > 200 bus cycles */
#endif /* enable SDRAM init */
}
#if defined(CONFIG_SYS_DRAM_TEST)
int
testdram(void)
{
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("Testing DRAM from 0x%08x to 0x%08x\n",
CONFIG_SYS_MEMTEST_START,
CONFIG_SYS_MEMTEST_END);
printf("DRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("DRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("DRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("DRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("DRAM test passed.\n");
return 0;
}
#endif
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI1 */
#ifdef CONFIG_PCI
void
pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int first_free_busno = 0;
#ifdef CONFIG_PCI1
struct fsl_pci_info pci_info;
u32 devdisr = in_be32(&gur->devdisr);
u32 pordevsr = in_be32(&gur->pordevsr);
u32 porpllsr = in_be32(&gur->porpllsr);
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
(pci_32) ? 32 : 64,
(pci_speed == 33000000) ? "33" :
(pci_speed == 66000000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_arb ? "arbiter" : "external-arbiter");
SET_STD_PCI_INFO(pci_info, 1);
set_next_law(pci_info.mem_phys,
law_size_bits(pci_info.mem_size), pci_info.law);
set_next_law(pci_info.io_phys,
law_size_bits(pci_info.io_size), pci_info.law);
first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
} else {
printf("PCI: disabled\n");
}
puts("\n");
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */
fsl_pcie_init_board(first_free_busno);
}
#endif
int board_eth_init(bd_t *bis)
{
tsec_standard_init(bis);
pci_eth_init(bis);
return 0; /* otherwise cpu_eth_init gets run */
}
int last_stage_init(void)
{
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FSL_PCI_INIT
FT_FSL_PCI_SETUP;
#endif
return 0;
}
#endif