| config DM_PWM |
| bool "Enable support for pulse-width modulation devices (PWM)" |
| depends on DM |
| help |
| A pulse-width modulator emits a pulse of varying width and provides |
| control over the duty cycle (high and low time) of the signal. This |
| is often used to control a voltage level. The more time the PWM |
| spends in the 'high' state, the higher the voltage. The PWM's |
| frequency/period can be controlled along with the proportion of that |
| time that the signal is high. |
| |
| config PWM_EXYNOS |
| bool "Enable support for the Exynos PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on Samsung Exynos 5250 and other Samsung SoCs. It |
| supports a programmable period and duty cycle. A 32-bit counter is |
| used. It provides 5 channels which can be independently |
| programmed. Channel 4 (the last) is normally used as a timer. |
| |
| config PWM_ROCKCHIP |
| bool "Enable support for the Rockchip PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on RK3288 and other Rockchip SoCs. It supports a |
| programmable period and duty cycle. A 32-bit counter is used. |
| Various options provided in the hardware (such as capture mode and |
| continuous/single-shot) are not supported by the driver. |
| |
| config PWM_SANDBOX |
| bool "Enable support for the sandbox PWM" |
| help |
| This is a sandbox PWM used for testing. It provides 3 channels and |
| records the settings passed into it, but otherwise does nothing |
| useful. The PWM can be enabled but is not connected to any outputs |
| so this is not very useful. |
| |
| config PWM_TEGRA |
| bool "Enable support for the Tegra PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on Tegra 20 and other Nvidia SoCs. It supports |
| four channels with a programmable period and duty cycle. Only a |
| 32KHz clock is supported by the driver but the duty cycle is |
| configurable. |
| |
| config PWM_MESON |
| bool "Enable support for the Amlogic Meson PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on Amlogic Meson SoCs. It supports pwm_a/b |
| pwm_c/d pwm_e/f pwmao_a/b pwmao_c/d channels with a programmable |
| period and duty cycle. There are 4 clock sources to choose , |
| it supported by the driver but the duty cycle is configurable. |