| menuconfig SPI | |
| bool "SPI Support" | |
| if SPI | |
| config DM_SPI | |
| bool "Enable Driver Model for SPI drivers" | |
| depends on DM | |
| help | |
| Enable driver model for SPI. The SPI slave interface | |
| (spi_setup_slave(), spi_xfer(), etc.) is then implemented by | |
| the SPI uclass. Drivers provide methods to access the SPI | |
| buses that they control. The uclass interface is defined in | |
| include/spi.h. The existing spi_slave structure is attached | |
| as 'parent data' to every slave on each bus. Slaves | |
| typically use driver-private data instead of extending the | |
| spi_slave structure. | |
| if DM_SPI | |
| config ALTERA_SPI | |
| bool "Altera SPI driver" | |
| help | |
| Enable the Altera SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this Altera | |
| IP core. Please find details on the "Embedded Peripherals IP | |
| User Guide" of Altera. | |
| config ATCSPI200_SPI | |
| bool "Andestech ATCSPI200 SPI driver" | |
| help | |
| Enable the Andestech ATCSPI200 SPI driver. This driver can be | |
| used to access the SPI flash on AE3XX and AE250 platforms embedding | |
| this Andestech IP core. | |
| config ATH79_SPI | |
| bool "Atheros SPI driver" | |
| depends on ARCH_ATH79 | |
| help | |
| Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used | |
| to access SPI NOR flash and other SPI peripherals. This driver | |
| uses driver model and requires a device tree binding to operate. | |
| please refer to doc/device-tree-bindings/spi/spi-ath79.txt. | |
| config ATMEL_SPI | |
| bool "Atmel SPI driver" | |
| default y if ARCH_AT91 | |
| help | |
| This enables driver for the Atmel SPI Controller, present on | |
| many AT91 (ARM) chips. This driver can be used to access | |
| the SPI Flash, such as AT25DF321. | |
| config BCM63XX_HSSPI | |
| bool "BCM63XX HSSPI driver" | |
| depends on ARCH_BMIPS | |
| help | |
| Enable the BCM6328 HSSPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this Broadcom | |
| SPI core. | |
| config BCM63XX_SPI | |
| bool "BCM6348 SPI driver" | |
| depends on ARCH_BMIPS | |
| help | |
| Enable the BCM6348/BCM6358 SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding these Broadcom | |
| SPI cores. | |
| config CADENCE_QSPI | |
| bool "Cadence QSPI driver" | |
| help | |
| Enable the Cadence Quad-SPI (QSPI) driver. This driver can be | |
| used to access the SPI NOR flash on platforms embedding this | |
| Cadence IP core. | |
| config DESIGNWARE_SPI | |
| bool "Designware SPI driver" | |
| help | |
| Enable the Designware SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this Designware | |
| IP core. | |
| config EXYNOS_SPI | |
| bool "Samsung Exynos SPI driver" | |
| help | |
| Enable the Samsung Exynos SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this Samsung | |
| Exynos IP core. | |
| config FSL_DSPI | |
| bool "Freescale DSPI driver" | |
| help | |
| Enable the Freescale DSPI driver. This driver can be used to | |
| access the SPI NOR flash and SPI Data flash on platforms embedding | |
| this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms | |
| use this driver. | |
| config ICH_SPI | |
| bool "Intel ICH SPI driver" | |
| help | |
| Enable the Intel ICH SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this Intel | |
| ICH IP core. | |
| config MVEBU_A3700_SPI | |
| bool "Marvell Armada 3700 SPI driver" | |
| help | |
| Enable the Marvell Armada 3700 SPI driver. This driver can be | |
| used to access the SPI NOR flash on platforms embedding this | |
| Marvell IP core. | |
| config PIC32_SPI | |
| bool "Microchip PIC32 SPI driver" | |
| depends on MACH_PIC32 | |
| help | |
| Enable the Microchip PIC32 SPI driver. This driver can be used | |
| to access the SPI NOR flash, MMC-over-SPI on platforms based on | |
| Microchip PIC32 family devices. | |
| config RENESAS_RPC_SPI | |
| bool "Renesas RPC SPI driver" | |
| depends on RCAR_GEN3 | |
| help | |
| Enable the Renesas RPC SPI driver, used to access SPI NOR flash | |
| on Renesas RCar Gen3 SoCs. This uses driver model and requires a | |
| device tree binding to operate. | |
| config ROCKCHIP_SPI | |
| bool "Rockchip SPI driver" | |
| help | |
| Enable the Rockchip SPI driver, used to access SPI NOR flash and | |
| other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs. | |
| This uses driver model and requires a device tree binding to | |
| operate. | |
| config SANDBOX_SPI | |
| bool "Sandbox SPI driver" | |
| depends on SANDBOX && DM | |
| help | |
| Enable SPI support for sandbox. This is an emulation of a real SPI | |
| bus. Devices can be attached to the bus using the device tree | |
| which specifies the driver to use. As an example, see this device | |
| tree fragment from sandbox.dts. It shows that the SPI bus has a | |
| single flash device on chip select 0 which is emulated by the driver | |
| for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c. | |
| spi@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0>; | |
| compatible = "sandbox,spi"; | |
| cs-gpios = <0>, <&gpio_a 0>; | |
| flash@0 { | |
| reg = <0>; | |
| compatible = "spansion,m25p16", "sandbox,spi-flash"; | |
| spi-max-frequency = <40000000>; | |
| sandbox,filename = "spi.bin"; | |
| }; | |
| }; | |
| config STM32_QSPI | |
| bool "STM32F7 QSPI driver" | |
| depends on STM32F7 | |
| help | |
| Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be | |
| used to access the SPI NOR flash chips on platforms embedding | |
| this ST IP core. | |
| config TEGRA114_SPI | |
| bool "nVidia Tegra114 SPI driver" | |
| help | |
| Enable the nVidia Tegra114 SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this nVidia Tegra114 | |
| IP core. | |
| This controller is different than the older SoCs SPI controller and | |
| also register interface get changed with this controller. | |
| config TEGRA20_SFLASH | |
| bool "nVidia Tegra20 Serial Flash controller driver" | |
| help | |
| Enable the nVidia Tegra20 Serial Flash controller driver. This driver | |
| can be used to access the SPI NOR flash on platforms embedding this | |
| nVidia Tegra20 IP core. | |
| config TEGRA20_SLINK | |
| bool "nVidia Tegra20/Tegra30 SLINK driver" | |
| help | |
| Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can | |
| be used to access the SPI NOR flash on platforms embedding this | |
| nVidia Tegra20/Tegra30 IP cores. | |
| config TEGRA210_QSPI | |
| bool "nVidia Tegra210 QSPI driver" | |
| help | |
| Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver | |
| be used to access SPI chips on platforms embedding this | |
| NVIDIA Tegra210 IP core. | |
| config XILINX_SPI | |
| bool "Xilinx SPI driver" | |
| help | |
| Enable the Xilinx SPI driver from the Xilinx EDK. This SPI | |
| controller support 8 bit SPI transfers only, with or w/o FIFO. | |
| For more info on Xilinx SPI Register Definitions and Overview | |
| see driver file - drivers/spi/xilinx_spi.c | |
| config ZYNQ_SPI | |
| bool "Zynq SPI driver" | |
| depends on ARCH_ZYNQ || ARCH_ZYNQMP | |
| help | |
| Enable the Zynq SPI driver. This driver can be used to | |
| access the SPI NOR flash on platforms embedding this Zynq | |
| SPI IP core. | |
| config ZYNQ_QSPI | |
| bool "Zynq QSPI driver" | |
| depends on ARCH_ZYNQ | |
| help | |
| Enable the Zynq Quad-SPI (QSPI) driver. This driver can be | |
| used to access the SPI NOR flash on platforms embedding this | |
| Zynq QSPI IP core. This IP is used to connect the flash in | |
| 4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel. | |
| config AML_SPICC | |
| bool "Amlogic SPICC Driver" | |
| help | |
| Enable support for SPICC on all meson SoCs. | |
| config AML_SPIFC | |
| bool "Amlogic SPIFC Driver" | |
| help | |
| Enable support for SPI Flash Controller on all meson SoCs. | |
| It should be set when user want SPI NAND or SPI NOR on meson SoCs. | |
| endif # if DM_SPI | |
| config SOFT_SPI | |
| bool "Soft SPI driver" | |
| help | |
| Enable Soft SPI driver. This driver is to use GPIO simulate | |
| the SPI protocol. | |
| config CF_SPI | |
| bool "ColdFire SPI driver" | |
| help | |
| Enable the ColdFire SPI driver. This driver can be used on | |
| some m68k SoCs. | |
| config FSL_ESPI | |
| bool "Freescale eSPI driver" | |
| help | |
| Enable the Freescale eSPI driver. This driver can be used to | |
| access the SPI interface and SPI NOR flash on platforms embedding | |
| this Freescale eSPI IP core. | |
| config FSL_QSPI | |
| bool "Freescale QSPI driver" | |
| help | |
| Enable the Freescale Quad-SPI (QSPI) driver. This driver can be | |
| used to access the SPI NOR flash on platforms embedding this | |
| Freescale IP core. | |
| config DAVINCI_SPI | |
| bool "Davinci & Keystone SPI driver" | |
| depends on ARCH_DAVINCI || ARCH_KEYSTONE | |
| help | |
| Enable the Davinci SPI driver | |
| config SH_SPI | |
| bool "SuperH SPI driver" | |
| help | |
| Enable the SuperH SPI controller driver. This driver can be used | |
| on various SuperH SoCs, such as SH7757. | |
| config SH_QSPI | |
| bool "Renesas Quad SPI driver" | |
| help | |
| Enable the Renesas Quad SPI controller driver. This driver can be | |
| used on Renesas SoCs. | |
| config TI_QSPI | |
| bool "TI QSPI driver" | |
| help | |
| Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. | |
| This driver support spi flash single, quad and memory reads. | |
| config KIRKWOOD_SPI | |
| bool "Marvell Kirkwood SPI Driver" | |
| help | |
| Enable support for SPI on various Marvell SoCs, such as | |
| Kirkwood and Armada 375. | |
| config LPC32XX_SSP | |
| bool "LPC32XX SPI Driver" | |
| help | |
| Enable support for SPI on LPC32xx | |
| config MPC8XX_SPI | |
| bool "MPC8XX SPI Driver" | |
| depends on MPC8xx | |
| help | |
| Enable support for SPI on MPC8XX | |
| config MPC8XXX_SPI | |
| bool "MPC8XXX SPI Driver" | |
| help | |
| Enable support for SPI on the MPC8XXX PowerPC SoCs. | |
| config MXC_SPI | |
| bool "MXC SPI Driver" | |
| help | |
| Enable the MXC SPI controller driver. This driver can be used | |
| on various i.MX SoCs such as i.MX31/35/51/6/7. | |
| config MXS_SPI | |
| bool "MXS SPI Driver" | |
| help | |
| Enable the MXS SPI controller driver. This driver can be used | |
| on the i.MX23 and i.MX28 SoCs. | |
| config OMAP3_SPI | |
| bool "McSPI driver for OMAP" | |
| help | |
| SPI master controller for OMAP24XX and later Multichannel SPI | |
| (McSPI). This driver be used to access SPI chips on platforms | |
| embedding this OMAP3 McSPI IP core. | |
| endif # menu "SPI Support" |