include/configs/dra7xx_evm.h - u-boot - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013
  * Texas Instruments Incorporated.
  * Lokesh Vutla	  <lokeshvutla@ti.com>
  *
  * Configuration settings for the TI DRA7XX board.
  * See ti_omap5_common.h for omap5 common settings.
  */

 #ifndef __CONFIG_DRA7XX_EVM_H
 #define __CONFIG_DRA7XX_EVM_H

 #include <environment/ti/dfu.h>

 #define CONFIG_IODELAY_RECALIBRATION

 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_MAX_MEM_MAPPED		0x80000000

 #ifndef CONFIG_QSPI_BOOT
 /* MMC ENV related defines */
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
 #define CONFIG_ENV_SIZE			(128 << 10)
 #define CONFIG_ENV_OFFSET		0x260000
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #endif

 #if (CONFIG_CONS_INDEX == 1)
 #define CONSOLEDEV			"ttyO0"
 #elif (CONFIG_CONS_INDEX == 3)
 #define CONSOLEDEV			"ttyO2"
 #endif
 #define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
 #define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */

 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2

 #define CONFIG_SYS_OMAP_ABE_SYSCK

 #ifndef CONFIG_SPL_BUILD
 /* Define the default GPT table for eMMC */
 #define PARTS_DEFAULT \
 	/* Linux partitions */ \
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
 	"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	/* Android partitions */ \
 	"partitions_android=" \
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
 	"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
 	"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
 	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
 	"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
 	"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
 	"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
 	"name=recovery,size=40M,uuid=${uuid_gpt_recovery};" \
 	"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
 	"name=system,size=768M,uuid=${uuid_gpt_system};" \
 	"name=vendor,size=256M,uuid=${uuid_gpt_vendor};" \
 	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
 	"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
 	"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
 	"name=userdata,size=-,uuid=${uuid_gpt_userdata}"

 #define DFUARGS \
 	"dfu_bufsiz=0x10000\0" \
 	DFU_ALT_INFO_MMC \
 	DFU_ALT_INFO_EMMC \
 	DFU_ALT_INFO_RAM \
 	DFU_ALT_INFO_QSPI
 #endif

 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_CMD_BOOTD
 #ifdef CONFIG_SPL_DFU_SUPPORT
 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
 #define DFUARGS \
 	"dfu_bufsiz=0x10000\0" \
 	DFU_ALT_INFO_RAM
 #endif
 #endif

 #include <configs/ti_omap5_common.h>

 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT

 /* CPSW Ethernet */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT		10
 #define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_PHY_TI

 /* SPI */
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                76800000
 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
 #define CONFIG_QSPI_QUAD_SUPPORT

 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
  * 0x9E0000 - 0x2000000 : USERLAND
  */
 #define CONFIG_SYS_SPI_KERNEL_OFFS	0x1E0000
 #define CONFIG_SYS_SPI_ARGS_OFFS	0x140000
 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SIZE			(64 << 10)
 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64 KB sectors */
 #define CONFIG_ENV_OFFSET		0x1C0000
 #define CONFIG_ENV_OFFSET_REDUND	0x1D0000
 #endif

 /* SPI SPL */
 #define CONFIG_TI_EDMA3
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000

 #define CONFIG_SUPPORT_EMMC_BOOT

 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP

 #define CONFIG_OMAP_USB2PHY2_HOST

 /* SATA */
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)

 /* NAND support */
 #ifdef CONFIG_NAND
 /* NAND: device related configs */
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
 					 26, 27, 28, 29, 30, 31, 32, 33, \
 					 34, 35, 36, 37, 38, 39, 40, 41, \
 					 42, 43, 44, 45, 46, 47, 48, 49, \
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
 #endif
 #endif /* !CONFIG_NAND */

 /* Parallel NOR Support */
 #if defined(CONFIG_NOR)
 /* NOR: device related configs */
 #define CONFIG_SYS_MAX_FLASH_SECT	512
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_SYS_FLASH_SIZE		(64 * 1024 * 1024) /* 64 MB */
 /* #define CONFIG_INIT_IGNORE_ERROR */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_FLASH_BASE		(0x08000000)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 /* Reduce SPL size by removing unlikey targets */
 #ifdef CONFIG_NOR_BOOT
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)	/* 128 KiB */
 #define CONFIG_ENV_OFFSET		0x001c0000
 #define CONFIG_ENV_OFFSET_REDUND	0x001e0000
 #endif
 #endif  /* NOR support */

 #endif /* __CONFIG_DRA7XX_EVM_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* (C) Copyright 2013
	* Texas Instruments Incorporated.
	* Lokesh Vutla <lokeshvutla@ti.com>
	*
	* Configuration settings for the TI DRA7XX board.
	* See ti_omap5_common.h for omap5 common settings.
	*/

	#ifndef __CONFIG_DRA7XX_EVM_H
	#define __CONFIG_DRA7XX_EVM_H

	#include <environment/ti/dfu.h>

	#define CONFIG_IODELAY_RECALIBRATION

	#define CONFIG_VERY_BIG_RAM
	#define CONFIG_NR_DRAM_BANKS 2
	#define CONFIG_MAX_MEM_MAPPED 0x80000000

	#ifndef CONFIG_QSPI_BOOT
	/* MMC ENV related defines */
	#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
	#define CONFIG_ENV_SIZE (128 << 10)
	#define CONFIG_ENV_OFFSET 0x260000
	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	#endif

	#if (CONFIG_CONS_INDEX == 1)
	#define CONSOLEDEV "ttyO0"
	#elif (CONFIG_CONS_INDEX == 3)
	#define CONSOLEDEV "ttyO2"
	#endif
	#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
	#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
	#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */

	#define CONFIG_ENV_EEPROM_IS_ON_I2C
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2

	#define CONFIG_SYS_OMAP_ABE_SYSCK

	#ifndef CONFIG_SPL_BUILD
	/* Define the default GPT table for eMMC */
	#define PARTS_DEFAULT \
	/* Linux partitions */ \
	"uuid_disk=${uuid_gpt_disk};" \
	"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
	"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
	/* Android partitions */ \
	"partitions_android=" \
	"uuid_disk=${uuid_gpt_disk};" \
	"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
	"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
	"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
	"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
	"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
	"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
	"name=recovery,size=40M,uuid=${uuid_gpt_recovery};" \
	"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
	"name=system,size=768M,uuid=${uuid_gpt_system};" \
	"name=vendor,size=256M,uuid=${uuid_gpt_vendor};" \
	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
	"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
	"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
	"name=userdata,size=-,uuid=${uuid_gpt_userdata}"

	#define DFUARGS \
	"dfu_bufsiz=0x10000\0" \
	DFU_ALT_INFO_MMC \
	DFU_ALT_INFO_EMMC \
	DFU_ALT_INFO_RAM \
	DFU_ALT_INFO_QSPI
	#endif

	#ifdef CONFIG_SPL_BUILD
	#undef CONFIG_CMD_BOOTD
	#ifdef CONFIG_SPL_DFU_SUPPORT
	#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
	#define DFUARGS \
	"dfu_bufsiz=0x10000\0" \
	DFU_ALT_INFO_RAM
	#endif
	#endif

	#include <configs/ti_omap5_common.h>

	/* Enhance our eMMC support / experience. */
	#define CONFIG_HSMMC2_8BIT

	/* CPSW Ethernet */
	#define CONFIG_BOOTP_DNS2
	#define CONFIG_BOOTP_SEND_HOSTNAME
	#define CONFIG_NET_RETRY_COUNT 10
	#define CONFIG_MII /* Required in net/eth.c */
	#define CONFIG_PHY_TI

	/* SPI */
	#define CONFIG_TI_SPI_MMAP
	#define CONFIG_SF_DEFAULT_SPEED 76800000
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#define CONFIG_QSPI_QUAD_SUPPORT

	/*
	* Default to using SPI for environment, etc.
	* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
	* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
	* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
	* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
	* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
	* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
	* 0x9E0000 - 0x2000000 : USERLAND
	*/
	#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
	#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
	#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
	#if defined(CONFIG_QSPI_BOOT)
	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	#define CONFIG_ENV_SIZE (64 << 10)
	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
	#define CONFIG_ENV_OFFSET 0x1C0000
	#define CONFIG_ENV_OFFSET_REDUND 0x1D0000
	#endif

	/* SPI SPL */
	#define CONFIG_TI_EDMA3
	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000

	#define CONFIG_SUPPORT_EMMC_BOOT

	/* USB xHCI HOST */
	#define CONFIG_USB_XHCI_OMAP

	#define CONFIG_OMAP_USB2PHY2_HOST

	/* SATA */
	#define CONFIG_SCSI_AHCI_PLAT
	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	#define CONFIG_SYS_SCSI_MAX_LUN 1
	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	CONFIG_SYS_SCSI_MAX_LUN)

	/* NAND support */
	#ifdef CONFIG_NAND
	/* NAND: device related configs */
	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	#define CONFIG_SYS_NAND_OOBSIZE 64
	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	CONFIG_SYS_NAND_PAGE_SIZE)
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	/* NAND: driver related configs */
	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
	10, 11, 12, 13, 14, 15, 16, 17, \
	18, 19, 20, 21, 22, 23, 24, 25, \
	26, 27, 28, 29, 30, 31, 32, 33, \
	34, 35, 36, 37, 38, 39, 40, 41, \
	42, 43, 44, 45, 46, 47, 48, 49, \
	50, 51, 52, 53, 54, 55, 56, 57, }
	#define CONFIG_SYS_NAND_ECCSIZE 512
	#define CONFIG_SYS_NAND_ECCBYTES 14
	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
	/* NAND: SPL related configs */
	/* NAND: SPL falcon mode configs */
	#ifdef CONFIG_SPL_OS_BOOT
	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
	#endif
	#endif /* !CONFIG_NAND */

	/* Parallel NOR Support */
	#if defined(CONFIG_NOR)
	/* NOR: device related configs */
	#define CONFIG_SYS_MAX_FLASH_SECT 512
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
	/* #define CONFIG_INIT_IGNORE_ERROR */
	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	#define CONFIG_SYS_FLASH_PROTECTION
	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	#define CONFIG_FLASH_CFI_MTD
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_FLASH_BASE (0x08000000)
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	/* Reduce SPL size by removing unlikey targets */
	#ifdef CONFIG_NOR_BOOT
	#define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */
	#define CONFIG_ENV_OFFSET 0x001c0000
	#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
	#endif
	#endif /* NOR support */

	#endif /* __CONFIG_DRA7XX_EVM_H */