| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT=y |
| CONFIG_COUNTER_FREQUENCY=24000000 |
| CONFIG_ARCH_ROCKCHIP=y |
| CONFIG_SF_DEFAULT_SPEED=50000000 |
| CONFIG_SF_DEFAULT_MODE=0x2000 |
| CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3576-rock-4d" |
| CONFIG_ROCKCHIP_RK3576=y |
| CONFIG_ROCKCHIP_SPI_IMAGE=y |
| CONFIG_SYS_LOAD_ADDR=0x40c00800 |
| CONFIG_SF_DEFAULT_BUS=5 |
| CONFIG_DEBUG_UART_BASE=0x2AD40000 |
| CONFIG_DEBUG_UART_CLOCK=24000000 |
| CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| CONFIG_SPL_SPI=y |
| CONFIG_PCI=y |
| CONFIG_DEBUG_UART=y |
| CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-rock-4d.dtb" |
| # CONFIG_DISPLAY_CPUINFO is not set |
| CONFIG_SPL_MAX_SIZE=0x40000 |
| # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set |
| CONFIG_SPL_SPI_LOAD=y |
| CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 |
| CONFIG_CMD_MEMINFO=y |
| CONFIG_CMD_MEMINFO_MAP=y |
| CONFIG_CMD_ADC=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MISC=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_PCI=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_RNG=y |
| CONFIG_CMD_REGULATOR=y |
| # CONFIG_SPL_DOS_PARTITION is not set |
| CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| CONFIG_ROCKCHIP_GPIO=y |
| CONFIG_SYS_I2C_ROCKCHIP=y |
| CONFIG_LED=y |
| CONFIG_LED_GPIO=y |
| CONFIG_SUPPORT_EMMC_RPMB=y |
| CONFIG_MMC_DW=y |
| CONFIG_MMC_DW_ROCKCHIP=y |
| CONFIG_SPI_FLASH_SFDP_SUPPORT=y |
| CONFIG_SPI_FLASH_MACRONIX=y |
| CONFIG_PHY_REALTEK=y |
| CONFIG_DWC_ETH_QOS=y |
| CONFIG_DWC_ETH_QOS_ROCKCHIP=y |
| CONFIG_NVME_PCI=y |
| CONFIG_PCIE_DW_ROCKCHIP=y |
| CONFIG_PHY_ROCKCHIP_INNO_USB2=y |
| CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y |
| CONFIG_PHY_ROCKCHIP_USBDP=y |
| CONFIG_DM_PMIC=y |
| CONFIG_PMIC_RK8XX=y |
| CONFIG_REGULATOR_RK8XX=y |
| CONFIG_BAUDRATE=1500000 |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYS_NS16550_MEM32=y |
| CONFIG_ROCKCHIP_SFC=y |
| CONFIG_SYSRESET_PSCI=y |
| CONFIG_USB=y |
| CONFIG_USB_XHCI_HCD=y |
| CONFIG_USB_DWC3=y |
| CONFIG_USB_DWC3_GENERIC=y |
| CONFIG_ERRNO_STR=y |
