| menu "RISC-V architecture" | |
| depends on RISCV | |
| config SYS_ARCH | |
| default "riscv" | |
| choice | |
| prompt "Target select" | |
| optional | |
| config TARGET_ANDES_AE350 | |
| bool "Support Andes ae350" | |
| config TARGET_ANDES_VOYAGER | |
| bool "Support Andes Voyager Board" | |
| config TARGET_BANANAPI_F3 | |
| bool "Support BananaPi F3 Board" | |
| config TARGET_K230_CANMV | |
| bool "Support K230 CanMV Board" | |
| config TARGET_LICHEERV_NANO | |
| bool "Support LicheeRV Nano Board" | |
| config TARGET_MICROCHIP_GENERIC | |
| bool "Support Microchip PolarFire-SoC Boards" | |
| config TARGET_MILKV_DUO | |
| bool "Support Milk-v Duo Board" | |
| config TARGET_OPENPITON_RISCV64 | |
| bool "Support RISC-V cores on OpenPiton SoC" | |
| config TARGET_QEMU_VIRT | |
| bool "Support QEMU Virt & RVVM Boards" | |
| select BOARD_LATE_INIT | |
| config TARGET_SIFIVE_UNLEASHED | |
| bool "Support SiFive Unleashed Board" | |
| config TARGET_SIFIVE_UNMATCHED | |
| bool "Support SiFive Unmatched Board" | |
| select SYS_CACHE_SHIFT_6 | |
| config TARGET_SIPEED_MAIX | |
| bool "Support Sipeed Maix Board" | |
| select SYS_CACHE_SHIFT_6 | |
| config TARGET_STARFIVE_VISIONFIVE2 | |
| bool "Support StarFive VisionFive2 Board" | |
| select BOARD_LATE_INIT | |
| config TARGET_TH1520_LPI4A | |
| bool "Support Sipeed's TH1520 Lichee PI 4A Board" | |
| select SYS_CACHE_SHIFT_6 | |
| config TARGET_XILINX_MBV | |
| bool "Support AMD/Xilinx MicroBlaze V" | |
| config TARGET_ASPEED_AST2700_IBEX | |
| bool "Support Ibex RISC-V cores on Aspeed AST2700 SoC" | |
| endchoice | |
| config SYS_ICACHE_OFF | |
| bool "Do not enable icache" | |
| help | |
| Do not enable instruction cache in U-Boot. | |
| config SPL_SYS_ICACHE_OFF | |
| bool "Do not enable icache in SPL" | |
| depends on SPL | |
| default SYS_ICACHE_OFF | |
| help | |
| Do not enable instruction cache in SPL. | |
| config SYS_DCACHE_OFF | |
| bool "Do not enable dcache" | |
| help | |
| Do not enable data cache in U-Boot. | |
| config SYS_CACHE_THEAD_CMO | |
| bool "THEAD non-standard cache operations" | |
| depends on !SYS_DCACHE_OFF | |
| default n | |
| help | |
| Support for non-standard cache management operations on SoCs based on | |
| T-Head C906/C910 cores. | |
| config SPL_SYS_DCACHE_OFF | |
| bool "Do not enable dcache in SPL" | |
| depends on SPL | |
| default SYS_DCACHE_OFF | |
| help | |
| Do not enable data cache in SPL. | |
| config SPL_ZERO_MEM_BEFORE_USE | |
| bool "Zero memory before use" | |
| depends on SPL | |
| help | |
| Zero stack/GD/malloc area in SPL before using them, this is needed for | |
| Sifive core devices that uses L2 cache to store SPL. | |
| # board-specific options below | |
| source "board/andestech/ae350/Kconfig" | |
| source "board/andestech/voyager/Kconfig" | |
| source "board/aspeed/ibex_ast2700/Kconfig" | |
| source "board/canaan/k230_canmv/Kconfig" | |
| source "board/emulation/qemu-riscv/Kconfig" | |
| source "board/microchip/mpfs_generic/Kconfig" | |
| source "board/openpiton/riscv64/Kconfig" | |
| source "board/sifive/unleashed/Kconfig" | |
| source "board/sifive/unmatched/Kconfig" | |
| source "board/sipeed/maix/Kconfig" | |
| source "board/sophgo/milkv_duo/Kconfig" | |
| source "board/sophgo/licheerv_nano/Kconfig" | |
| source "board/spacemit/bananapi-f3/Kconfig" | |
| source "board/starfive/visionfive2/Kconfig" | |
| source "board/thead/th1520_lpi4a/Kconfig" | |
| source "board/xilinx/mbv/Kconfig" | |
| # platform-specific options below | |
| source "arch/riscv/cpu/andes/Kconfig" | |
| source "arch/riscv/cpu/cv1800b/Kconfig" | |
| source "arch/riscv/cpu/fu540/Kconfig" | |
| source "arch/riscv/cpu/fu740/Kconfig" | |
| source "arch/riscv/cpu/ast2700/Kconfig" | |
| source "arch/riscv/cpu/mpfs/Kconfig" | |
| source "arch/riscv/cpu/generic/Kconfig" | |
| source "arch/riscv/cpu/jh7110/Kconfig" | |
| source "arch/riscv/cpu/k1/Kconfig" | |
| source "arch/riscv/cpu/k230/Kconfig" | |
| source "arch/riscv/cpu/th1520/Kconfig" | |
| # architecture-specific options below | |
| choice | |
| prompt "Base ISA" | |
| default ARCH_RV32I | |
| config ARCH_RV32I | |
| bool "RV32I" | |
| select 32BIT | |
| help | |
| Choose this option to target the RV32I base integer instruction set. | |
| config ARCH_RV64I | |
| bool "RV64I" | |
| select 64BIT | |
| select SPL_64BIT if SPL | |
| select PHYS_64BIT | |
| help | |
| Choose this option to target the RV64I base integer instruction set. | |
| endchoice | |
| config FRAMEPOINTER | |
| bool "Build with frame pointer for stack unwinding" | |
| help | |
| Choose this option to use the frame pointer so the stack can be | |
| unwound if needed. This is useful for tracing where faults came | |
| from as the source may be several functions back | |
| If you say Y here, then the code size will be increased due to | |
| having to store the fp. | |
| config SPL_FRAMEPOINTER | |
| bool "Build SPL with frame pointer for stack unwinding" | |
| depends on SPL | |
| help | |
| Choose this option to use the frame pointer so the stack can be | |
| unwound if needed. This is useful for tracing where faults came | |
| from as the source may be several functions back | |
| If you say Y here, then the code size will be increased due to | |
| having to store the fp. | |
| choice | |
| prompt "Code Model" | |
| default CMODEL_MEDLOW | |
| config CMODEL_MEDLOW | |
| bool "medium low code model" | |
| help | |
| U-Boot and its statically defined symbols must lie within a single 2 GiB | |
| address range and must lie between absolute addresses -2 GiB and +2 GiB. | |
| config CMODEL_MEDANY | |
| bool "medium any code model" | |
| help | |
| U-Boot and its statically defined symbols must be within any single 2 GiB | |
| address range. | |
| endchoice | |
| choice | |
| prompt "Run Mode" | |
| default RISCV_MMODE | |
| config RISCV_MMODE | |
| bool "Machine" | |
| help | |
| Choose this option to build U-Boot for RISC-V M-Mode. | |
| config RISCV_SMODE | |
| bool "Supervisor" | |
| imply DEBUG_UART | |
| help | |
| Choose this option to build U-Boot for RISC-V S-Mode. | |
| endchoice | |
| choice | |
| prompt "SPL Run Mode" | |
| default SPL_RISCV_MMODE | |
| depends on SPL | |
| config SPL_RISCV_MMODE | |
| bool "Machine" | |
| help | |
| Choose this option to build U-Boot SPL for RISC-V M-Mode. | |
| config SPL_RISCV_SMODE | |
| bool "Supervisor" | |
| help | |
| Choose this option to build U-Boot SPL for RISC-V S-Mode. | |
| endchoice | |
| config RISCV_ISA_C | |
| bool "Emit compressed instructions" | |
| default y | |
| help | |
| Adds "C" to the ISA subsets that the toolchain is allowed to emit | |
| when building U-Boot, which results in compressed instructions in the | |
| U-Boot binary. | |
| config RISCV_ISA_F | |
| bool "Standard extension for Single-Precision Floating Point" | |
| default y | |
| help | |
| Adds "F" to the ISA string passed to the compiler. | |
| config RISCV_ISA_D | |
| bool "Standard extension for Double-Precision Floating Point" | |
| depends on RISCV_ISA_F | |
| default y | |
| help | |
| Adds "D" to the ISA string passed to the compiler and changes the | |
| riscv32 ABI from ilp32 to ilp32d and the riscv64 ABI from lp64 to | |
| lp64d. | |
| config RISCV_ISA_ZBB | |
| bool "Zbb extension support for bit manipulation instructions" | |
| help | |
| Adds ZBB extension (basic bit manipulation) to the ISA subsets | |
| that the toolchain is allowed to emit when building U-Boot. | |
| The Zbb extension provides instructions to accelerate a number | |
| of bit-specific operations (count bit population, sign extending, | |
| bitrotation, etc) and enables optimized string routines. | |
| menu "Use assembly optimized implementation of string routines" | |
| config USE_ARCH_STRLEN | |
| bool "Use an assembly optimized implementation of strlen" | |
| default y | |
| depends on RISCV_ISA_ZBB | |
| help | |
| Enable the generation of an optimized version of strlen using | |
| Zbb extension. | |
| config SPL_USE_ARCH_STRLEN | |
| bool "Use an assembly optimized implementation of strlen for SPL" | |
| default y if USE_ARCH_STRLEN | |
| depends on RISCV_ISA_ZBB | |
| depends on SPL | |
| help | |
| Enable the generation of an optimized version of strlen using | |
| Zbb extension. | |
| config TPL_USE_ARCH_STRLEN | |
| bool "Use an assembly optimized implementation of strlen for TPL" | |
| default y if USE_ARCH_STRLEN | |
| depends on RISCV_ISA_ZBB | |
| depends on TPL | |
| help | |
| Enable the generation of an optimized version of strlen using | |
| Zbb extension. | |
| config USE_ARCH_STRCMP | |
| bool "Use an assembly optimized implementation of strcmp" | |
| default y | |
| depends on RISCV_ISA_ZBB | |
| help | |
| Enable the generation of an optimized version of strcmp using | |
| Zbb extension. | |
| config SPL_USE_ARCH_STRCMP | |
| bool "Use an assembly optimized implementation of strcmp for SPL" | |
| default y if USE_ARCH_STRCMP | |
| depends on RISCV_ISA_ZBB | |
| depends on SPL | |
| help | |
| Enable the generation of an optimized version of strcmp using | |
| Zbb extension. | |
| config TPL_USE_ARCH_STRCMP | |
| bool "Use an assembly optimized implementation of strcmp for TPL" | |
| default y if USE_ARCH_STRCMP | |
| depends on RISCV_ISA_ZBB | |
| depends on TPL | |
| help | |
| Enable the generation of an optimized version of strcmp using | |
| Zbb extension. | |
| config USE_ARCH_STRNCMP | |
| bool "Use an assembly optimized implementation of strncmp" | |
| default y | |
| depends on RISCV_ISA_ZBB | |
| help | |
| Enable the generation of an optimized version of strncmp using | |
| Zbb extension. | |
| config SPL_USE_ARCH_STRNCMP | |
| bool "Use an assembly optimized implementation of strncmp for SPL" | |
| default y if USE_ARCH_STRNCMP | |
| depends on RISCV_ISA_ZBB | |
| depends on SPL | |
| help | |
| Enable the generation of an optimized version of strncmp using | |
| Zbb extension. | |
| config TPL_USE_ARCH_STRNCMP | |
| bool "Use an assembly optimized implementation of strncmp for TPL" | |
| default y if USE_ARCH_STRNCMP | |
| depends on RISCV_ISA_ZBB | |
| depends on TPL | |
| help | |
| Enable the generation of an optimized version of strncmp using | |
| Zbb extension. | |
| endmenu | |
| config RISCV_ISA_A | |
| bool "Standard extension for Atomic Instructions" | |
| depends on RISCV_ISA_ZAAMO && RISCV_ISA_ZALRSC | |
| default y | |
| help | |
| Adds "A" to the ISA string passed to the compiler. | |
| config RISCV_ISA_ZAAMO | |
| bool "Standard extension for Atomic Memory Operations" | |
| default y | |
| help | |
| Indicates the platform supports Zaamo extension for atomic memory | |
| operations. Hand-written Assembly routines won't use AMO | |
| instructions if set to n. | |
| config RISCV_ISA_ZALRSC | |
| bool "Standard extension for LR/SC instructions" | |
| default y | |
| help | |
| Indicates the platform supports Zalrsc extension for load-reserved | |
| and store-conditional isntructions. Hand-written assembly routines | |
| won't use LR/SC instructions if set to n. | |
| config RISCV_ISA_ZICBOM | |
| bool "Zicbom support" | |
| depends on !SYS_DISABLE_DCACHE_OPS | |
| config DMA_ADDR_T_64BIT | |
| bool | |
| default y if 64BIT | |
| config RISCV_ACLINT | |
| bool | |
| depends on RISCV_MMODE | |
| select REGMAP | |
| select SYSCON | |
| help | |
| The RISC-V ACLINT block holds memory-mapped control and status registers | |
| associated with software and timer interrupts. | |
| config SPL_RISCV_ACLINT | |
| bool | |
| depends on SPL_RISCV_MMODE | |
| select SPL_REGMAP | |
| select SPL_SYSCON | |
| help | |
| The RISC-V ACLINT block holds memory-mapped control and status registers | |
| associated with software and timer interrupts. | |
| config SIFIVE_CACHE | |
| bool | |
| help | |
| This enables the operations to configure SiFive cache | |
| config ANDES_PLICSW | |
| bool | |
| depends on RISCV_MMODE || SPL_RISCV_MMODE | |
| select REGMAP | |
| select SYSCON | |
| select SPL_REGMAP if SPL | |
| select SPL_SYSCON if SPL | |
| help | |
| The Andes PLICSW block holds memory-mapped claim and pending | |
| registers associated with software interrupt. | |
| config SMP | |
| bool "Symmetric Multi-Processing" | |
| depends on SBI_V01 || !RISCV_SMODE | |
| help | |
| This enables support for systems with more than one CPU. If | |
| you say N here, U-Boot will run on single and multiprocessor | |
| machines, but will use only one CPU of a multiprocessor | |
| machine. If you say Y here, U-Boot will run on many, but not | |
| all, single processor machines. | |
| config SPL_SMP | |
| bool "Symmetric Multi-Processing in SPL" | |
| depends on SPL && SPL_RISCV_MMODE | |
| default y | |
| help | |
| This enables support for systems with more than one CPU in SPL. | |
| If you say N here, U-Boot SPL will run on single and multiprocessor | |
| machines, but will use only one CPU of a multiprocessor | |
| machine. If you say Y here, U-Boot SPL will run on many, but not | |
| all, single processor machines. | |
| config NR_CPUS | |
| int "Maximum number of CPUs (2-32)" | |
| range 2 32 | |
| depends on SMP || SPL_SMP | |
| default 8 | |
| help | |
| On multiprocessor machines, U-Boot sets up a stack for each CPU. | |
| Stack memory is pre-allocated. U-Boot must therefore know the | |
| maximum number of CPUs that may be present. | |
| config SBI | |
| bool | |
| default y if RISCV_SMODE || SPL_RISCV_SMODE | |
| choice | |
| prompt "SBI support" | |
| default SBI_V02 | |
| config SBI_V01 | |
| bool "SBI v0.1 support" | |
| depends on SBI | |
| help | |
| This config allows kernel to use SBI v0.1 APIs. This will be | |
| deprecated in future once legacy M-mode software are no longer in use. | |
| config SBI_V02 | |
| bool "SBI v0.2 or later support" | |
| depends on SBI | |
| help | |
| The SBI specification introduced the concept of extensions in version | |
| v0.2. With this configuration option U-Boot can detect and use SBI | |
| extensions. With the HSM extension introduced in SBI 0.2, only a | |
| single hart needs to boot and enter the operating system. The booting | |
| hart can bring up secondary harts one by one afterwards. | |
| Choose this option if OpenSBI release v0.7 or above is used together | |
| with U-Boot. | |
| endchoice | |
| config SBI_IPI | |
| bool | |
| depends on SBI | |
| default y if RISCV_SMODE || SPL_RISCV_SMODE | |
| depends on SMP | |
| config XIP | |
| bool "XIP mode" | |
| help | |
| XIP (eXecute In Place) is a method for executing code directly | |
| from a NOR flash memory without copying the code to ram. | |
| Say yes here if U-Boot boots from flash directly. | |
| config SPL_XIP | |
| bool "Enable XIP mode for SPL" | |
| help | |
| If SPL starts in read-only memory (XIP for example) then we shouldn't | |
| rely on lock variables (for example hart_lottery and available_harts_lock), | |
| this affects only SPL, other stages should proceed as non-XIP. | |
| config AVAILABLE_HARTS | |
| bool "Send IPI by available harts" | |
| depends on !XIP | |
| default y | |
| help | |
| By default, IPI sending mechanism will depend on available_harts. | |
| If disable this, it will send IPI by CPUs node numbers of device tree. | |
| config SHOW_REGS | |
| default y | |
| bool "Show registers on unhandled exception" | |
| help | |
| By default only the program counter and the return address register | |
| are shown in crash dumps. Enable this symbol to show all registers in | |
| main U-Boot. | |
| config SPL_SHOW_REGS | |
| bool "In SPL show registers on unhandled exception" | |
| depends on SPL | |
| help | |
| By default only the program counter and the return address register | |
| are shown in crash dumps. Enable this symbol to show all registers in | |
| SPL. | |
| config RISCV_PRIV_1_9 | |
| bool "Use version 1.9 of the RISC-V priviledged specification" | |
| help | |
| Older versions of the RISC-V priviledged specification had | |
| separate counter enable CSRs for each privilege mode. Writing | |
| to the unified mcounteren CSR on a processor implementing the | |
| old specification will result in an illegal instruction | |
| exception. In addition to counter CSR changes, the way virtual | |
| memory is configured was also changed. | |
| config STACK_SIZE_SHIFT | |
| int "Stack size shift" | |
| default 14 | |
| config OF_BOARD_FIXUP | |
| default y if OF_SEPARATE && RISCV_SMODE | |
| menu "Use assembly optimized implementation of memory routines" | |
| config USE_ARCH_MEMCPY | |
| bool "Use an assembly optimized implementation of memcpy" | |
| default y | |
| help | |
| Enable the generation of an optimized version of memcpy. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config SPL_USE_ARCH_MEMCPY | |
| bool "Use an assembly optimized implementation of memcpy for SPL" | |
| default y if USE_ARCH_MEMCPY | |
| depends on SPL | |
| help | |
| Enable the generation of an optimized version of memcpy. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config TPL_USE_ARCH_MEMCPY | |
| bool "Use an assembly optimized implementation of memcpy for TPL" | |
| default y if USE_ARCH_MEMCPY | |
| depends on TPL | |
| help | |
| Enable the generation of an optimized version of memcpy. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config USE_ARCH_MEMMOVE | |
| bool "Use an assembly optimized implementation of memmove" | |
| default y | |
| help | |
| Enable the generation of an optimized version of memmove. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config SPL_USE_ARCH_MEMMOVE | |
| bool "Use an assembly optimized implementation of memmove for SPL" | |
| default y if USE_ARCH_MEMCPY | |
| depends on SPL | |
| help | |
| Enable the generation of an optimized version of memmove. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config TPL_USE_ARCH_MEMMOVE | |
| bool "Use an assembly optimized implementation of memmove for TPL" | |
| default y if USE_ARCH_MEMCPY | |
| depends on TPL | |
| help | |
| Enable the generation of an optimized version of memmove. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config USE_ARCH_MEMSET | |
| bool "Use an assembly optimized implementation of memset" | |
| default y | |
| help | |
| Enable the generation of an optimized version of memset. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config SPL_USE_ARCH_MEMSET | |
| bool "Use an assembly optimized implementation of memset for SPL" | |
| default y if USE_ARCH_MEMSET | |
| depends on SPL | |
| help | |
| Enable the generation of an optimized version of memset. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| config TPL_USE_ARCH_MEMSET | |
| bool "Use an assembly optimized implementation of memset for TPL" | |
| default y if USE_ARCH_MEMSET | |
| depends on TPL | |
| help | |
| Enable the generation of an optimized version of memset. | |
| Such an implementation may be faster under some conditions | |
| but may increase the binary size. | |
| endmenu | |
| config SPL_LOAD_FIT_OPENSBI_OS_BOOT | |
| bool "Enable SPL (OpenSBI OS boot mode) applying linux from FIT" | |
| depends on SPL_LOAD_FIT | |
| help | |
| Use fw_dynamic from the FIT image, and u-boot SPL will invoke it directly. | |
| This is a shortcut boot flow, from u-boot SPL -> OpenSBI -> u-boot proper | |
| -> linux to u-boot SPL -> OpenSBI -> linux. | |
| config SPL_OPTEE_LOAD_ADDR | |
| hex "OP-TEE Trusted OS image load address" | |
| depends on OPTEE | |
| help | |
| Load address of the OP-TEE binary. | |
| endmenu |