| How to use U-Boot on Grinn's liteBoard | |
| -------------------------------------- | |
| - Build U-Boot for liteBoard: | |
| $ make mrproper | |
| $ make liteboard_defconfig | |
| $ make | |
| This will generate the SPL image called SPL and the u-boot.img. | |
| - Flash the SPL image into the micro SD card: | |
| sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync | |
| - Flash the u-boot.img image into the micro SD card: | |
| sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync | |
| - Jumper settings: | |
| S1: 0 1 0 1 1 1 | |
| where 0 means bottom position and 1 means top position (from the | |
| switch label numbers reference). | |
| - Insert the micro SD card in the board. | |
| - Connect USB cable between liteBoard and the PC for the power and console. | |
| - U-Boot messages should come up. |