| CONFIG_ARM=y |
| CONFIG_ARCH_SUNXI=y |
| CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun55i-h728-x96qpro+" |
| CONFIG_DRAM_CLK=792 |
| CONFIG_SPL=y |
| CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 |
| CONFIG_DRAM_SUNXI_DX_DRI=0x0c0c0c0c |
| CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e |
| CONFIG_DRAM_SUNXI_ODT_EN=0x90909090 |
| CONFIG_DRAM_SUNXI_TPR0=0x80808080 |
| CONFIG_DRAM_SUNXI_TPR1=0x06060606 |
| CONFIG_DRAM_SUNXI_TPR6=0x3380807e |
| CONFIG_DRAM_SUNXI_TPR10=0x802f7788 |
| CONFIG_DRAM_SUNXI_TPR11=0x8f919190 |
| CONFIG_DRAM_SUNXI_TPR12=0x22222723 |
| CONFIG_MACH_SUN55I_A523=y |
| CONFIG_SUNXI_DRAM_A523_DDR3=y |
| CONFIG_MMC_SUNXI_SLOT_EXTRA=2 |
| CONFIG_R_I2C_ENABLE=y |
| # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set |
| CONFIG_SPL_I2C=y |
| CONFIG_SPL_SYS_I2C_LEGACY=y |
| CONFIG_SYS_I2C_MVTWSI=y |
| CONFIG_SYS_I2C_SLAVE=0x7f |
| CONFIG_SYS_I2C_SPEED=400000 |
| CONFIG_SUPPORT_EMMC_BOOT=y |
| CONFIG_REGULATOR_AXP=y |
| CONFIG_AXP717_POWER=y |
| CONFIG_AXP_DCDC2_VOLT=920 |
| CONFIG_AXP_DCDC3_VOLT=1360 |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_OHCI_HCD=y |
