| config I2C_MUX | |
| bool "Support I2C multiplexers" | |
| depends on DM_I2C | |
| help | |
| This enables I2C buses to be multiplexed, so that you can select | |
| one of several buses using some sort of control mechanism. The | |
| bus select is handled automatically when that bus is accessed, | |
| using a suitable I2C MUX driver. | |
| config SPL_I2C_MUX | |
| bool "Support I2C multiplexers on SPL" | |
| depends on SPL && I2C_MUX | |
| help | |
| This enables I2C buses to be multiplexed, so that you can select | |
| one of several buses using some sort of control mechanism. The | |
| bus select is handled automatically when that bus is accessed, | |
| using a suitable I2C MUX driver. | |
| config I2C_ARB_GPIO_CHALLENGE | |
| bool "GPIO-based I2C arbitration" | |
| depends on I2C_MUX | |
| help | |
| If you say yes to this option, support will be included for an | |
| I2C multimaster arbitration scheme using GPIOs and a challenge & | |
| response mechanism where masters have to claim the bus by asserting | |
| a GPIO. | |
| config I2C_MUX_PCA9541 | |
| tristate "NXP PCA9541 I2C Master Selector" | |
| depends on I2C_MUX | |
| help | |
| If you say yes here you get support for the NXP PCA9541 | |
| I2C Master Selector. | |
| config I2C_MUX_PCA954x | |
| tristate "TI PCA954x I2C Mux/switches" | |
| depends on I2C_MUX | |
| help | |
| If you say yes here you get support for the TI PCA954x I2C mux/switch | |
| devices. It is x width I2C multiplexer which enables to partitioning | |
| I2C bus and connect multiple devices with the same address to the same | |
| I2C controller where driver handles proper routing to target i2c | |
| device. Supported chips are PCA9543, PCA9544, PCA9546, PCA9547, | |
| PCA9548 and PCA9646. | |
| It's also compatible to Maxims MAX735x I2C switch chips, which are controlled | |
| as the NXP PCA9548 and the MAX736x chips that act like the PCA9544. | |
| This includes the: | |
| MAX7356, MAX7357, MAX7358, MAX7367, MAX7368 and MAX7369 | |
| config I2C_MUX_GPIO | |
| tristate "GPIO-based I2C multiplexer" | |
| depends on I2C_MUX && DM_GPIO | |
| select DEVRES | |
| help | |
| If you say yes to this option, support will be included for | |
| a GPIO based I2C multiplexer. This driver provides access to | |
| I2C busses connected through a MUX, which is controlled | |
| through GPIO pins. |