| menu "Power Domain Support" | |
| config POWER_DOMAIN | |
| bool "Enable power domain support using Driver Model" | |
| depends on DM && OF_CONTROL | |
| help | |
| Enable support for the power domain driver class. Many SoCs allow | |
| power to be applied to or removed from portions of the SoC (power | |
| domains). This may be used to save power. This API provides the | |
| means to control such power management hardware. | |
| config APPLE_PMGR_POWER_DOMAIN | |
| bool "Enable the Apple PMGR power domain driver" | |
| depends on POWER_DOMAIN | |
| default y if ARCH_APPLE | |
| help | |
| Enable support for manipulating power domains on Apple SoCs. | |
| This driver is needed to power on parts of the SoC that have | |
| not been powered on by previous boot stages. | |
| config AGILEX5_PMGR_POWER_DOMAIN | |
| bool "Enable the Agilex5 PMGR power domain driver" | |
| depends on SPL_POWER_DOMAIN && TARGET_SOCFPGA_SOC64 | |
| help | |
| Enable support for power gating peripherals' SRAM specified in | |
| the handoff data values obtained from the bitstream to reduce | |
| power consumption. | |
| config BCM6328_POWER_DOMAIN | |
| bool "Enable the BCM6328 power domain driver" | |
| depends on POWER_DOMAIN && ARCH_BMIPS | |
| help | |
| Enable support for manipulating BCM6345 power domains via MMIO | |
| mapped registers. | |
| config IMX8_POWER_DOMAIN | |
| bool "Enable i.MX8 power domain driver" | |
| depends on ARCH_IMX8 | |
| help | |
| Enable support for manipulating NXP i.MX8 on-SoC power domains via IPC | |
| requests to the SCU. | |
| config IMX8M_POWER_DOMAIN | |
| bool "Enable i.MX8M power domain driver" | |
| depends on POWER_DOMAIN && ARCH_IMX8M | |
| select CLK | |
| help | |
| Enable support for manipulating NXP i.MX8M on-SoC power domains via | |
| requests to the ATF. | |
| config IMX8MP_HSIOMIX_BLKCTRL | |
| bool "Enable i.MX8MP HSIOMIX domain driver" | |
| depends on POWER_DOMAIN && IMX8MP | |
| select CLK | |
| help | |
| Enable support for manipulating NXP i.MX8MP on-SoC HSIOMIX block controller. | |
| config IMX8MP_MEDIAMIX_BLKCTRL | |
| bool "Enable i.MX8MP MEDIAMIX domain driver" | |
| depends on POWER_DOMAIN && IMX8MP | |
| select CLK | |
| help | |
| Enable support for manipulating NXP i.MX8MP on-SoC MEDIAMIX block controller. | |
| config MTK_POWER_DOMAIN | |
| bool "Enable the MediaTek power domain driver" | |
| depends on POWER_DOMAIN && ARCH_MEDIATEK | |
| help | |
| Enable support for manipulating MediaTek power domains via MMIO | |
| mapped registers. | |
| config MESON_GX_VPU_POWER_DOMAIN | |
| bool "Enable Amlogic Meson GX VPU power domain driver" | |
| depends on POWER_DOMAIN && ARCH_MESON | |
| help | |
| Enable support for manipulating Amlogic Meson GX Video Processing | |
| Unit power domain. | |
| config MESON_EE_POWER_DOMAIN | |
| bool "Enable Amlogic Everything-Else power domain driver" | |
| depends on POWER_DOMAIN && ARCH_MESON | |
| help | |
| Enable support for manipulating Amlogic Meson Everything-Else power | |
| domains. | |
| config MESON_SECURE_POWER_DOMAIN | |
| bool "Enable Amlogic Secure power domain driver" | |
| depends on POWER_DOMAIN && ARCH_MESON && MESON_A1 | |
| help | |
| Enable support for manipulating Amlogic Meson Secure power domains. | |
| Support for Amlogic A1 series. | |
| config SANDBOX_POWER_DOMAIN | |
| bool "Enable the sandbox power domain test driver" | |
| depends on POWER_DOMAIN && SANDBOX | |
| help | |
| Enable support for a test power domain driver implementation, which | |
| simply accepts requests to power on/off various HW modules without | |
| actually doing anything beyond a little error checking. | |
| config SCMI_POWER_DOMAIN | |
| bool "Enable SCMI power domain driver" | |
| depends on POWER_DOMAIN && SCMI_FIRMWARE | |
| help | |
| Enable power domain implementation based on SCMI power domain | |
| management protocol. | |
| config TEGRA186_POWER_DOMAIN | |
| bool "Enable Tegra186 BPMP-based power domain driver" | |
| depends on TEGRA186_BPMP | |
| help | |
| Enable support for manipulating Tegra's on-SoC power domains via IPC | |
| requests to the BPMP (Boot and Power Management Processor). | |
| config TI_SCI_POWER_DOMAIN | |
| bool "Enable the TI SCI-based power domain driver" | |
| depends on POWER_DOMAIN && TI_SCI_PROTOCOL | |
| help | |
| Generic power domain implementation for TI devices implementing the | |
| TI SCI protocol. | |
| config TI_POWER_DOMAIN | |
| bool "Enable the TI K3 Power domain driver" | |
| depends on POWER_DOMAIN && ARCH_K3 | |
| help | |
| Generic power domain implementation for TI K3 devices. | |
| config TI_OMAP_PRM_POWER_DOMAIN | |
| bool "Enable the TI OMAP PRM power domain driver" | |
| depends on POWER_DOMAIN && ARCH_OMAP2PLUS | |
| help | |
| Enable support for TI OMAP Power and Reset Manager (PRM) power domains. | |
| The driver is currently a stub to be able to probe devices that | |
| require this type of power domain device. | |
| config ZYNQMP_POWER_DOMAIN | |
| bool "Enable the Xilinx ZynqMP Power domain driver" | |
| depends on POWER_DOMAIN && ZYNQMP_FIRMWARE | |
| help | |
| Generic power domain implementation for Xilinx ZynqMP devices. | |
| The driver should be enabled when system starts in very minimal | |
| configuration and it is extended at run time. Then enabling | |
| the driver will ensure that PMUFW enable access to requested IP. | |
| endmenu |