| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * NFS support driver - based on etherboot and U-BOOT's tftp.c |
| * |
| * Masami Komiya <mkomiya@sonare.it> 2004 |
| * |
| */ |
| |
| /* NOTE: the NFS code is heavily inspired by the NetBSD netboot code (read: |
| * large portions are copied verbatim) as distributed in OSKit 0.97. A few |
| * changes were necessary to adapt the code to Etherboot and to fix several |
| * inconsistencies. Also the RPC message preparation is done "by hand" to |
| * avoid adding netsprintf() which I find hard to understand and use. */ |
| |
| /* NOTE 2: Etherboot does not care about things beyond the kernel image, so |
| * it loads the kernel image off the boot server (ARP_SERVER) and does not |
| * access the client root disk (root-path in dhcpd.conf), which would use |
| * ARP_ROOTSERVER. The root disk is something the operating system we are |
| * about to load needs to use. This is different from the OSKit 0.97 logic. */ |
| |
| /* NOTE 3: Symlink handling introduced by Anselm M Hoffmeister, 2003-July-14 |
| * If a symlink is encountered, it is followed as far as possible (recursion |
| * possible, maximum 16 steps). There is no clearing of ".."'s inside the |
| * path, so please DON'T DO THAT. thx. */ |
| |
| /* NOTE 4: NFSv3 support added by Guillaume GARDET, 2016-June-20. |
| * NFSv2 is still used by default. But if server does not support NFSv2, then |
| * NFSv3 is used, if available on NFS server. */ |
| |
| /* NOTE 5: NFSv1 support added by Christian Gmeiner, Thomas Rienoessl, |
| * September 27, 2018. As of now, NFSv3 is the default choice. If the server |
| * does not support NFSv3, we fall back to versions 2 or 1. */ |
| |
| #include <display_options.h> |
| #include <image.h> |
| #include <log.h> |
| #include <net.h> |
| #include <malloc.h> |
| #include "nfs.h" |
| #include "nfs-common.h" |
| #include <time.h> |
| |
| /************************************************************************** |
| RPC_LOOKUP - Lookup RPC Port numbers |
| **************************************************************************/ |
| void rpc_req(int rpc_prog, int rpc_proc, uint32_t *data, int datalen) |
| { |
| int pktlen; |
| int sport; |
| |
| rpc_req_common(rpc_prog, rpc_proc, data, datalen, |
| (char *)net_tx_packet + net_eth_hdr_size() |
| + IP_UDP_HDR_SIZE, &pktlen, &sport); |
| |
| net_send_udp_packet(net_server_ethaddr, nfs_server_ip, sport, |
| nfs_our_port, pktlen); |
| } |
| |
| /************************************************************************** |
| Interfaces of U-BOOT |
| **************************************************************************/ |
| static void nfs_timeout_handler(void) |
| { |
| if (++nfs_timeout_count > NFS_RETRY_COUNT) { |
| puts("\nRetry count exceeded; starting again\n"); |
| net_start_again(); |
| } else { |
| puts("T "); |
| net_set_timeout_handler(nfs_timeout + |
| nfs_timeout * nfs_timeout_count, |
| nfs_timeout_handler); |
| nfs_send(); |
| } |
| } |
| |
| void nfs_refresh_timeout(void) |
| { |
| net_set_timeout_handler(nfs_timeout, nfs_timeout_handler); |
| } |
| |
| static void nfs_handler(uchar *pkt, unsigned dest, struct in_addr sip, |
| unsigned src, unsigned len) |
| { |
| debug("%s\n", __func__); |
| |
| if (len > sizeof(struct rpc_t)) |
| return; |
| |
| if (dest != nfs_our_port) |
| return; |
| |
| nfs_pkt_recv(pkt, len); |
| } |
| |
| void nfs_start(void) |
| { |
| debug("%s\n", __func__); |
| nfs_download_state = NETLOOP_FAIL; |
| |
| nfs_server_ip = net_server_ip; |
| nfs_path = (char *)nfs_path_buff; |
| |
| if (nfs_path == NULL) { |
| net_set_state(NETLOOP_FAIL); |
| printf("*** ERROR: Fail allocate memory\n"); |
| return; |
| } |
| |
| if (!net_parse_bootfile(&nfs_server_ip, nfs_path, |
| sizeof(nfs_path_buff))) { |
| sprintf(nfs_path, "/nfsroot/%02X%02X%02X%02X.img", |
| net_ip.s_addr & 0xFF, |
| (net_ip.s_addr >> 8) & 0xFF, |
| (net_ip.s_addr >> 16) & 0xFF, |
| (net_ip.s_addr >> 24) & 0xFF); |
| |
| printf("*** Warning: no boot file name; using '%s'\n", |
| nfs_path); |
| } |
| |
| nfs_filename = nfs_basename(nfs_path); |
| nfs_path = nfs_dirname(nfs_path); |
| |
| printf("Using %s device\n", eth_get_name()); |
| |
| printf("File transfer via NFS from server %pI4; our IP address is %pI4", |
| &nfs_server_ip, &net_ip); |
| |
| /* Check if we need to send across this subnet */ |
| if (net_gateway.s_addr && net_netmask.s_addr) { |
| struct in_addr our_net; |
| struct in_addr server_net; |
| |
| our_net.s_addr = net_ip.s_addr & net_netmask.s_addr; |
| server_net.s_addr = nfs_server_ip.s_addr & net_netmask.s_addr; |
| if (our_net.s_addr != server_net.s_addr) |
| printf("; sending through gateway %pI4", |
| &net_gateway); |
| } |
| printf("\nFilename '%s/%s'.", nfs_path, nfs_filename); |
| |
| if (net_boot_file_expected_size_in_blocks) { |
| printf(" Size is 0x%x Bytes = ", |
| net_boot_file_expected_size_in_blocks << 9); |
| print_size(net_boot_file_expected_size_in_blocks << 9, ""); |
| } |
| printf("\nLoad address: 0x%lx\nLoading: *\b", image_load_addr); |
| |
| net_set_timeout_handler(nfs_timeout, nfs_timeout_handler); |
| net_set_udp_handler(nfs_handler); |
| |
| nfs_timeout_count = 0; |
| nfs_state = STATE_PRCLOOKUP_PROG_MOUNT_REQ; |
| |
| /*nfs_our_port = 4096 + (get_ticks() % 3072);*/ |
| /*FIX ME !!!*/ |
| nfs_our_port = 1000; |
| |
| /* zero out server ether in case the server ip has changed */ |
| memset(net_server_ethaddr, 0, 6); |
| |
| nfs_send(); |
| } |