| Fuchsia firmware team | 46a8da2 | 2021-12-15 10:56:53 +0800 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | # CONFIG_SYS_THUMB_BUILD is not set |
| 3 | CONFIG_ARCH_OMAP2PLUS=y |
| 4 | CONFIG_SYS_TEXT_BASE=0x80008000 |
| 5 | CONFIG_TARGET_TAO3530=y |
| 6 | CONFIG_SPL=y |
| 7 | CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA" |
| 8 | CONFIG_BOOTDELAY=3 |
| 9 | # CONFIG_SPL_EXT_SUPPORT is not set |
| 10 | CONFIG_HUSH_PARSER=y |
| 11 | # CONFIG_CMD_IMI is not set |
| 12 | # CONFIG_CMD_FLASH is not set |
| 13 | CONFIG_CMD_I2C=y |
| 14 | CONFIG_CMD_MMC=y |
| 15 | CONFIG_CMD_NAND=y |
| 16 | CONFIG_CMD_USB=y |
| 17 | # CONFIG_CMD_SETEXPR is not set |
| 18 | CONFIG_CMD_DHCP=y |
| 19 | CONFIG_CMD_PING=y |
| 20 | CONFIG_CMD_CACHE=y |
| 21 | CONFIG_CMD_EXT2=y |
| 22 | CONFIG_CMD_FAT=y |
| 23 | CONFIG_CMD_MTDPARTS=y |
| 24 | CONFIG_MTDIDS_DEFAULT="nand0=nand" |
| 25 | CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)" |
| 26 | CONFIG_ENV_IS_IN_NAND=y |
| 27 | CONFIG_MMC_OMAP_HS=y |
| 28 | CONFIG_NAND=y |
| 29 | CONFIG_SYS_NAND_BUSWIDTH_16BIT=y |
| 30 | CONFIG_SPL_NAND_SIMPLE=y |
| 31 | CONFIG_CONS_INDEX=3 |
| 32 | CONFIG_SYS_NS16550=y |
| 33 | CONFIG_SPI=y |
| 34 | CONFIG_OMAP3_SPI=y |
| 35 | CONFIG_USB=y |
| 36 | CONFIG_USB_EHCI_HCD=y |
| 37 | CONFIG_USB_STORAGE=y |
| 38 | CONFIG_USB_HOST_ETHER=y |
| 39 | CONFIG_USB_ETHER_SMSC95XX=y |
| 40 | CONFIG_OF_LIBFDT=y |
