| Fuchsia firmware team | 46a8da2 | 2021-12-15 10:56:53 +0800 | [diff] [blame^] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_ARCH_MX6=y |
| 3 | CONFIG_SYS_TEXT_BASE=0x17800000 |
| 4 | CONFIG_SPL_GPIO_SUPPORT=y |
| 5 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 6 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 7 | CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| 8 | CONFIG_TARGET_MX6Q_ENGICAM=y |
| 9 | CONFIG_SPL_SERIAL_SUPPORT=y |
| 10 | CONFIG_SPL_LIBDISK_SUPPORT=y |
| 11 | CONFIG_SPL_WATCHDOG_SUPPORT=y |
| 12 | CONFIG_SPL=y |
| 13 | # CONFIG_CMD_BMODE is not set |
| 14 | CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-rqs" |
| 15 | CONFIG_FIT=y |
| 16 | CONFIG_FIT_SIGNATURE=y |
| 17 | CONFIG_FIT_VERBOSE=y |
| 18 | CONFIG_SPL_LOAD_FIT=y |
| 19 | CONFIG_IMAGE_FORMAT_LEGACY=y |
| 20 | CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" |
| 21 | CONFIG_BOOTDELAY=3 |
| 22 | CONFIG_SUPPORT_RAW_INITRD=y |
| 23 | CONFIG_SPL_OS_BOOT=y |
| 24 | CONFIG_HUSH_PARSER=y |
| 25 | CONFIG_SYS_PROMPT="icorem6qdl-rqs> " |
| 26 | CONFIG_CRC32_VERIFY=y |
| 27 | CONFIG_CMD_MEMTEST=y |
| 28 | CONFIG_CMD_GPIO=y |
| 29 | CONFIG_CMD_I2C=y |
| 30 | CONFIG_CMD_MMC=y |
| 31 | CONFIG_CMD_MII=y |
| 32 | CONFIG_CMD_PING=y |
| 33 | CONFIG_CMD_CACHE=y |
| 34 | CONFIG_CMD_EXT2=y |
| 35 | CONFIG_CMD_EXT4=y |
| 36 | CONFIG_CMD_EXT4_WRITE=y |
| 37 | CONFIG_CMD_FAT=y |
| 38 | CONFIG_CMD_FS_GENERIC=y |
| 39 | CONFIG_OF_LIST="imx6q-icore-rqs imx6dl-icore-rqs" |
| 40 | CONFIG_ENV_IS_IN_MMC=y |
| 41 | CONFIG_SYS_I2C_MXC=y |
| 42 | CONFIG_FSL_ESDHC=y |
| 43 | CONFIG_PHYLIB=y |
| 44 | CONFIG_PHY_MICREL=y |
| 45 | CONFIG_FEC_MXC=y |
| 46 | CONFIG_PINCTRL=y |
| 47 | CONFIG_PINCTRL_IMX6=y |
| 48 | CONFIG_MXC_UART=y |
