| Fuchsia firmware team | 46a8da2 | 2021-12-15 10:56:53 +0800 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_ARCH_OMAP2PLUS=y |
| 3 | CONFIG_SPL_GPIO_SUPPORT=y |
| 4 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 5 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 6 | CONFIG_AM33XX=y |
| 7 | CONFIG_TARGET_CM_T335=y |
| 8 | CONFIG_SPL_MMC_SUPPORT=y |
| 9 | CONFIG_SPL_SERIAL_SUPPORT=y |
| 10 | CONFIG_SPL_LIBDISK_SUPPORT=y |
| 11 | CONFIG_SPL_WATCHDOG_SUPPORT=y |
| 12 | CONFIG_SPL=y |
| 13 | CONFIG_SPL_FAT_SUPPORT=y |
| 14 | CONFIG_DISTRO_DEFAULTS=y |
| 15 | # CONFIG_USE_BOOTCOMMAND is not set |
| 16 | CONFIG_SYS_CONSOLE_INFO_QUIET=y |
| 17 | CONFIG_VERSION_VARIABLE=y |
| 18 | CONFIG_SPL_EXT_SUPPORT=y |
| 19 | CONFIG_SPL_I2C_SUPPORT=y |
| 20 | CONFIG_SPL_MTD_SUPPORT=y |
| 21 | CONFIG_SPL_POWER_SUPPORT=y |
| 22 | # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set |
| 23 | CONFIG_SYS_PROMPT="CM-T335 # " |
| 24 | CONFIG_CMD_ASKENV=y |
| 25 | CONFIG_CMD_EEPROM=y |
| 26 | CONFIG_CMD_EEPROM_LAYOUT=y |
| 27 | CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" |
| 28 | # CONFIG_CMD_FLASH is not set |
| 29 | CONFIG_CMD_GPIO=y |
| 30 | CONFIG_CMD_I2C=y |
| 31 | CONFIG_CMD_MMC=y |
| 32 | CONFIG_CMD_NAND=y |
| 33 | # CONFIG_CMD_SETEXPR is not set |
| 34 | CONFIG_CMD_EXT4_WRITE=y |
| 35 | CONFIG_CMD_MTDPARTS=y |
| 36 | CONFIG_MTDIDS_DEFAULT="nand0=nand" |
| 37 | CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:2m(spl),1m(u-boot),1m(u-boot-env),1m(dtb),4m(splash),6m(kernel),-(rootfs)" |
| 38 | CONFIG_ENV_IS_IN_NAND=y |
| 39 | CONFIG_CMD_PCA953X=y |
| 40 | CONFIG_LED_STATUS=y |
| 41 | CONFIG_LED_STATUS_GPIO=y |
| 42 | CONFIG_LED_STATUS0=y |
| 43 | CONFIG_LED_STATUS_BIT=64 |
| 44 | CONFIG_LED_STATUS_BOOT_ENABLE=y |
| 45 | CONFIG_LED_STATUS_BOOT=0 |
| 46 | CONFIG_MMC_OMAP_HS=y |
| 47 | CONFIG_NAND=y |
| 48 | CONFIG_DRIVER_TI_CPSW=y |
| 49 | CONFIG_SYS_NS16550=y |
| 50 | CONFIG_FAT_WRITE=y |
| 51 | CONFIG_OF_LIBFDT=y |
