| Fuchsia firmware team | 46a8da2 | 2021-12-15 10:56:53 +0800 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_ARCH_MX28=y |
| 3 | CONFIG_SYS_TEXT_BASE=0x40002000 |
| 4 | CONFIG_SPL_GPIO_SUPPORT=y |
| 5 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 6 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 7 | CONFIG_TARGET_M28EVK=y |
| 8 | CONFIG_SPL_SERIAL_SUPPORT=y |
| 9 | CONFIG_SPL=y |
| 10 | CONFIG_FIT=y |
| 11 | CONFIG_BOOTDELAY=3 |
| 12 | CONFIG_USE_BOOTARGS=y |
| 13 | CONFIG_BOOTARGS="console=ttyAMA0,115200n8 " |
| 14 | # CONFIG_CONSOLE_MUX is not set |
| 15 | CONFIG_SYS_CONSOLE_IS_IN_ENV=y |
| 16 | CONFIG_VERSION_VARIABLE=y |
| 17 | # CONFIG_DISPLAY_BOARDINFO is not set |
| 18 | CONFIG_ARCH_MISC_INIT=y |
| 19 | CONFIG_BOARD_EARLY_INIT_F=y |
| 20 | # CONFIG_SPL_FRAMEWORK is not set |
| 21 | CONFIG_HUSH_PARSER=y |
| 22 | CONFIG_CMD_ASKENV=y |
| 23 | CONFIG_CMD_GREPENV=y |
| 24 | # CONFIG_CMD_FLASH is not set |
| 25 | CONFIG_CMD_GPIO=y |
| 26 | CONFIG_CMD_MMC=y |
| 27 | CONFIG_CMD_NAND_TRIMFFS=y |
| 28 | CONFIG_CMD_SF=y |
| 29 | CONFIG_CMD_SPI=y |
| 30 | CONFIG_CMD_USB=y |
| 31 | CONFIG_CMD_DHCP=y |
| 32 | CONFIG_CMD_MII=y |
| 33 | CONFIG_CMD_PING=y |
| 34 | CONFIG_CMD_BMP=y |
| 35 | CONFIG_CMD_CACHE=y |
| 36 | CONFIG_CMD_DATE=y |
| 37 | CONFIG_CMD_EXT4=y |
| 38 | CONFIG_CMD_EXT4_WRITE=y |
| 39 | CONFIG_CMD_FAT=y |
| 40 | CONFIG_CMD_FS_GENERIC=y |
| 41 | CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" |
| 42 | CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(u-boot),512k(env1),512k(env2),14m(boot),238m(data),-@4096k(UBI)" |
| 43 | CONFIG_CMD_UBI=y |
| 44 | CONFIG_ENV_IS_IN_NAND=y |
| 45 | CONFIG_MMC_MXS=y |
| 46 | CONFIG_NAND=y |
| 47 | CONFIG_NAND_MXS=y |
| 48 | CONFIG_SPI_FLASH=y |
| 49 | CONFIG_SPI_FLASH_STMICRO=y |
| 50 | CONFIG_CONS_INDEX=0 |
| 51 | CONFIG_SPI=y |
| 52 | CONFIG_MXS_SPI=y |
| 53 | CONFIG_USB=y |
| 54 | CONFIG_USB_EHCI_HCD=y |
| 55 | CONFIG_USB_STORAGE=y |
| 56 | CONFIG_VIDEO=y |
| 57 | CONFIG_FAT_WRITE=y |
| 58 | CONFIG_OF_LIBFDT=y |
