| |
| /* |
| * arch/arm/include/asm/arch-gxb/uart.h |
| * |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #ifndef __MESON_FIRM_UART_H_ |
| #define __MESON_FIRM_UART_H_ |
| #include <config.h> |
| #include <common.h> |
| #include "register.h" |
| //#include "io.h" |
| #include <asm/arch/secure_apb.h> |
| |
| #ifndef CONFIG_CONS_INDEX |
| #error Please define CONFIG_CONS_INDEX==[0|1] |
| #endif |
| |
| #if CONFIG_CONS_INDEX==0 |
| #define UART_PORT_CONS UART_PORT_0 |
| #elif CONFIG_CONS_INDEX==1 |
| #define UART_PORT_CONS UART_PORT_1 |
| #elif CONFIG_CONS_INDEX==2 |
| #define UART_PORT_CONS UART_PORT_AO |
| #define USE_AO_UART 1 |
| #else |
| #error Please define CONFIG_CONS_INDEX==[0|1] |
| #endif |
| /* |
| #define UART_PORT_0 CBUS_REG_ADDR(UART0_WFIFO) |
| #define UART_PORT_1 CBUS_REG_ADDR(UART1_WFIFO) |
| #define UART_PORT_2 CBUS_REG_ADDR(UART2_WFIFO) |
| #define UART_PORT_AO P_AO_UART_WFIFO |
| |
| #define UART_WFIFO (0<<2) |
| #define UART_RFIFO (1<<2) |
| #define UART_CONTROL (2<<2) |
| #define UART_STATUS (3<<2) |
| #define UART_MISC (4<<2) |
| */ |
| |
| #include "clock.h" |
| |
| #define UART_CLK_SRC CLK81 |
| #define UART_PORT_0 UART0_WFIFO |
| #define UART_PORT_1 UART1_WFIFO |
| #define UART_PORT_AO AO_UART_WFIFO |
| #define UART_WFIFO 0 |
| #define UART_RFIFO 1 |
| #define UART_CONTROL 2 |
| #define UART_STATUS 3 |
| #define UART_MISC 4 |
| |
| #if USE_AO_UART == 1 |
| #define P_UART(uart_base,reg) (uart_base + (reg<<2)) |
| #else |
| #define P_UART(uart_base,reg) CBUS_REG_ADDR(uart_base+reg) |
| #endif |
| #define P_UART_WFIFO(uart_base) P_UART(uart_base,UART_WFIFO) |
| #define P_UART_RFIFO(uart_base) P_UART(uart_base,UART_RFIFO) |
| |
| #define P_UART_CONTROL(uart_base) P_UART(uart_base,UART_CONTROL) |
| #define UART_CNTL_MASK_BAUD_RATE (0xfff) |
| #define UART_CNTL_MASK_TX_EN (1<<12) |
| #define UART_CNTL_MASK_RX_EN (1<<13) |
| #define UART_CNTL_MASK_2WIRE (1<<15) |
| #define UART_CNTL_MASK_STP_BITS (3<<16) |
| #define UART_CNTL_MASK_STP_1BIT (0<<16) |
| #define UART_CNTL_MASK_STP_2BIT (1<<16) |
| #define UART_CNTL_MASK_PRTY_EVEN (0<<18) |
| #define UART_CNTL_MASK_PRTY_ODD (1<<18) |
| #define UART_CNTL_MASK_PRTY_TYPE (1<<18) |
| #define UART_CNTL_MASK_PRTY_EN (1<<19) |
| #define UART_CNTL_MASK_CHAR_LEN (3<<20) |
| #define UART_CNTL_MASK_CHAR_8BIT (0<<20) |
| #define UART_CNTL_MASK_CHAR_7BIT (1<<20) |
| #define UART_CNTL_MASK_CHAR_6BIT (2<<20) |
| #define UART_CNTL_MASK_CHAR_5BIT (3<<20) |
| #define UART_CNTL_MASK_RST_TX (1<<22) |
| #define UART_CNTL_MASK_RST_RX (1<<23) |
| #define UART_CNTL_MASK_CLR_ERR (1<<24) |
| #define UART_CNTL_MASK_INV_RX (1<<25) |
| #define UART_CNTL_MASK_INV_TX (1<<26) |
| #define UART_CNTL_MASK_RINT_EN (1<<27) |
| #define UART_CNTL_MASK_TINT_EN (1<<28) |
| #define UART_CNTL_MASK_INV_CTS (1<<29) |
| #define UART_CNTL_MASK_MASK_ERR (1<<30) |
| #define UART_CNTL_MASK_INV_RTS (1<<31) |
| #define P_UART_STATUS(uart_base) P_UART(uart_base,UART_STATUS ) |
| #define UART_STAT_MASK_RFIFO_CNT (0x7f<<0) |
| #define UART_STAT_MASK_TFIFO_CNT (0x7f<<8) |
| #define UART_STAT_MASK_PRTY_ERR (1<<16) |
| #define UART_STAT_MASK_FRAM_ERR (1<<17) |
| #define UART_STAT_MASK_WFULL_ERR (1<<18) |
| #define UART_STAT_MASK_RFIFO_FULL (1<<19) |
| #define UART_STAT_MASK_RFIFO_EMPTY (1<<20) |
| #define UART_STAT_MASK_TFIFO_FULL (1<<21) |
| #define UART_STAT_MASK_TFIFO_EMPTY (1<<22) |
| #define UART_STAT_MASK_XMIT_BUSY (1<<25) |
| #define UART_STAT_MASK_RECV_BUSY (1<<26) |
| #define P_UART_MISC(uart_base) P_UART(uart_base,UART_MISC ) |
| |
| |
| #ifndef CONFIG_SERIAL_STP_BITS |
| #define CONFIG_SERIAL_STP_BITS 1 // 1 , 2 |
| #endif |
| #if CONFIG_SERIAL_STP_BITS==1 |
| #define UART_STP_BIT UART_CNTL_MASK_STP_1BIT |
| #elif CONFIG_SERIAL_STP_BITS==2 |
| #define UART_STP_BIT UART_CNTL_MASK_STP_2BIT |
| #else |
| #error CONFIG_SERIAL_STP_BITS wrong |
| #endif |
| |
| |
| #ifndef CONFIG_SERIAL_PRTY_TYPE |
| #define CONFIG_SERIAL_PRTY_TYPE 0 //0 ,2 ,3 |
| #endif |
| #if CONFIG_SERIAL_PRTY_TYPE==0 |
| #define UART_PRTY_BIT 0 |
| #elif CONFIG_SERIAL_PRTY_TYPE==2 |
| #define UART_PRTY_BIT (UART_CNTL_MASK_PRTY_EN|UART_CNTL_MASK_PRTY_EVEN) |
| #elif CONFIG_SERIAL_PRTY_TYPE==3 |
| #define UART_PRTY_BIT (UART_CNTL_MASK_PRTY_EN|UART_CNTL_MASK_PRTY_ODD) |
| #else |
| #error CONFIG_SERIAL_PRTY_TYPE wrong |
| #endif |
| |
| #ifndef CONFIG_SERIAL_CHAR_LEN |
| #define CONFIG_SERIAL_CHAR_LEN 8 //5,6,7,8 |
| #endif |
| #if CONFIG_SERIAL_CHAR_LEN==5 |
| #define UART_CHAR_LEN UART_CNTL_MASK_CHAR_5BIT |
| #elif CONFIG_SERIAL_CHAR_LEN==6 |
| #define UART_CHAR_LEN UART_CNTL_MASK_CHAR_6BIT |
| #elif CONFIG_SERIAL_CHAR_LEN==7 |
| #define UART_CHAR_LEN UART_CNTL_MASK_CHAR_7BIT |
| #elif CONFIG_SERIAL_CHAR_LEN==8 |
| #define UART_CHAR_LEN UART_CNTL_MASK_CHAR_8BIT |
| #else |
| #error CONFIG_SERIAL_CHAR_LEN wrong |
| #endif |
| #define UART_CONTROL_SET(baud,clk81) \ |
| (((clk81)/(baud*4) -1) \ |
| | UART_STP_BIT \ |
| | UART_PRTY_BIT \ |
| | UART_CHAR_LEN \ |
| | UART_CNTL_MASK_TX_EN \ |
| | UART_CNTL_MASK_RX_EN \ |
| | UART_CNTL_MASK_RST_TX \ |
| | UART_CNTL_MASK_RST_RX \ |
| | UART_CNTL_MASK_CLR_ERR ) |
| #endif |