| menu "MIPS architecture" | |
| depends on MIPS | |
| config SYS_ARCH | |
| default "mips" | |
| config SYS_CPU | |
| default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2 | |
| default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2 | |
| config USE_PRIVATE_LIBGCC | |
| default y | |
| choice | |
| prompt "Target select" | |
| config TARGET_QEMU_MIPS | |
| bool "Support qemu-mips" | |
| select SUPPORTS_BIG_ENDIAN | |
| select SUPPORTS_LITTLE_ENDIAN | |
| select SUPPORTS_CPU_MIPS32_R1 | |
| select SUPPORTS_CPU_MIPS32_R2 | |
| select SUPPORTS_CPU_MIPS64_R1 | |
| select SUPPORTS_CPU_MIPS64_R2 | |
| config TARGET_MALTA | |
| bool "Support malta" | |
| select SUPPORTS_BIG_ENDIAN | |
| select SUPPORTS_LITTLE_ENDIAN | |
| select SUPPORTS_CPU_MIPS32_R1 | |
| select SUPPORTS_CPU_MIPS32_R2 | |
| config TARGET_VCT | |
| bool "Support vct" | |
| select SUPPORTS_BIG_ENDIAN | |
| select SUPPORTS_CPU_MIPS32_R1 | |
| select SUPPORTS_CPU_MIPS32_R2 | |
| config TARGET_DBAU1X00 | |
| bool "Support dbau1x00" | |
| select SUPPORTS_BIG_ENDIAN | |
| select SUPPORTS_LITTLE_ENDIAN | |
| select SUPPORTS_CPU_MIPS32_R1 | |
| select SUPPORTS_CPU_MIPS32_R2 | |
| config TARGET_PB1X00 | |
| bool "Support pb1x00" | |
| select SUPPORTS_LITTLE_ENDIAN | |
| select SUPPORTS_CPU_MIPS32_R1 | |
| select SUPPORTS_CPU_MIPS32_R2 | |
| endchoice | |
| source "board/dbau1x00/Kconfig" | |
| source "board/imgtec/malta/Kconfig" | |
| source "board/micronas/vct/Kconfig" | |
| source "board/pb1x00/Kconfig" | |
| source "board/qemu-mips/Kconfig" | |
| if MIPS | |
| choice | |
| prompt "Endianness selection" | |
| help | |
| Some MIPS boards can be configured for either little or big endian | |
| byte order. These modes require different U-Boot images. In general there | |
| is one preferred byteorder for a particular system but some systems are | |
| just as commonly used in the one or the other endianness. | |
| config SYS_BIG_ENDIAN | |
| bool "Big endian" | |
| depends on SUPPORTS_BIG_ENDIAN | |
| config SYS_LITTLE_ENDIAN | |
| bool "Little endian" | |
| depends on SUPPORTS_LITTLE_ENDIAN | |
| endchoice | |
| choice | |
| prompt "CPU selection" | |
| default CPU_MIPS32_R2 | |
| config CPU_MIPS32_R1 | |
| bool "MIPS32 Release 1" | |
| depends on SUPPORTS_CPU_MIPS32_R1 | |
| select 32BIT | |
| help | |
| Choose this option to build an U-Boot for release 1 or later of the | |
| MIPS32 architecture. | |
| config CPU_MIPS32_R2 | |
| bool "MIPS32 Release 2" | |
| depends on SUPPORTS_CPU_MIPS32_R2 | |
| select 32BIT | |
| help | |
| Choose this option to build an U-Boot for release 2 or later of the | |
| MIPS32 architecture. | |
| config CPU_MIPS64_R1 | |
| bool "MIPS64 Release 1" | |
| depends on SUPPORTS_CPU_MIPS64_R1 | |
| select 64BIT | |
| help | |
| Choose this option to build a kernel for release 1 or later of the | |
| MIPS64 architecture. | |
| config CPU_MIPS64_R2 | |
| bool "MIPS64 Release 2" | |
| depends on SUPPORTS_CPU_MIPS64_R2 | |
| select 64BIT | |
| help | |
| Choose this option to build a kernel for release 2 or later of the | |
| MIPS64 architecture. | |
| endchoice | |
| config SUPPORTS_BIG_ENDIAN | |
| bool | |
| config SUPPORTS_LITTLE_ENDIAN | |
| bool | |
| config SUPPORTS_CPU_MIPS32_R1 | |
| bool | |
| config SUPPORTS_CPU_MIPS32_R2 | |
| bool | |
| config SUPPORTS_CPU_MIPS64_R1 | |
| bool | |
| config SUPPORTS_CPU_MIPS64_R2 | |
| bool | |
| config 32BIT | |
| bool | |
| config 64BIT | |
| bool | |
| endif | |
| endmenu |