| |
| /* |
| * board/amlogic/configs/gxtvbb_skt_v1.h |
| * |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #ifndef __GXTVBB_SKT_V1_H__ |
| #define __GXTVBB_SKT_V1_H__ |
| |
| #include <asm/arch/cpu.h> |
| |
| #define CONFIG_SYS_GENERIC_BOARD 1 |
| #ifndef CONFIG_AML_MESON |
| #warning "include warning" |
| #endif |
| |
| /* |
| * platform power init config |
| */ |
| #define CONFIG_PLATFORM_POWER_INIT |
| #define CONFIG_VCCK_INIT_VOLTAGE 1100 |
| #define CONFIG_VDDEE_INIT_VOLTAGE 1000 // voltage for power up |
| #define CONFIG_VDDEE_SLEEP_VOLTAGE 850 // voltage for suspend |
| |
| #define CONFIG_INSTABOOT |
| /* SMP Definitinos */ |
| #define CPU_RELEASE_ADDR secondary_boot_func |
| |
| /* Serial config */ |
| #define CONFIG_CONS_INDEX 2 |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_AML_MESON_SERIAL 1 |
| #define CONFIG_SERIAL_MULTI 1 |
| #define CONFIG_IR_REMOTE 1 |
| //Enable ir remote wake up for bl30 |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_CNT 8 |
| #define CONFIG_IR_REMOTE_USE_PROTOCOL 0 // 0:nec 1:duokan 2:Toshiba 3:rca |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL1 0xef10fe01 //amlogic nec tv ir --- power |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL2 0xf30cfe01 //amlogic nec tv ir --- ch+ |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL3 0xf20dfe01 //amlogic nec tv ir --- ch- |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL4 0xe51afb04 //amlogic nec box ir --- power |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL5 0xFFFFFFFF //amlogic nec tv ir --- right |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL6 0x00f2a0d5 //tcl rca |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL7 0xf40b1818 //hair toshiba |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL8 0xf30c0e0e //skyworth |
| #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL9 0xFFFFFFFF |
| |
| /*config the default parameters for adc power key*/ |
| #define CONFIG_ADC_POWER_KEY_CHAN 2 /*channel range: 0-7*/ |
| #define CONFIG_ADC_POWER_KEY_VAL 0 /*sample value range: 0-1023*/ |
| |
| /* args/envs */ |
| #define CONFIG_SYS_MAXARGS 64 |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "firstboot=1\0"\ |
| "upgrade_step=0\0"\ |
| "loadaddr=1080000\0"\ |
| "dtb_mem_addr=0x1000000\0" \ |
| "fdt_high=0x20000000\0" \ |
| "panel_type=lvds_0\0" \ |
| "outputmode=1080p60hz\0" \ |
| "panel_reverse=0\0" \ |
| "osd_reverse=n\0" \ |
| "video_reverse=n\0" \ |
| "display_width=1920\0" \ |
| "display_height=1080\0" \ |
| "display_bpp=16\0" \ |
| "display_color_index=16\0" \ |
| "display_layer=osd1\0" \ |
| "display_color_fg=0xffff\0" \ |
| "display_color_bg=0\0" \ |
| "fb_addr=0x3b000000\0" \ |
| "fb_width=1920\0" \ |
| "fb_height=1080\0" \ |
| "usb_burning=update 1000\0" \ |
| "fdt_high=0x20000000\0"\ |
| "try_auto_burn=update 700 750;\0"\ |
| "sdcburncfg=aml_sdc_burn.ini\0"\ |
| "sdc_burning=sdc_burn ${sdcburncfg}\0"\ |
| "wipe_data=successful\0"\ |
| "wipe_cache=successful\0"\ |
| "jtag=apao\0"\ |
| "upgrade_check="\ |
| "echo upgrade_step=${upgrade_step}; "\ |
| "if itest ${upgrade_step} == 3; then "\ |
| "run init_display; run storeargs; run update; "\ |
| "else if itest ${upgrade_step} == 1; then "\ |
| "defenv_reserv; setenv upgrade_step 2; saveenv; "\ |
| "fi; fi; "\ |
| "\0"\ |
| "bootmode_check="\ |
| "get_rebootmode; echo reboot_mode=${reboot_mode}; "\ |
| "if test ${reboot_mode} = factory_reset; then "\ |
| "defenv_reserv aml_dt;setenv upgrade_step 2;save; "\ |
| "fi; "\ |
| "\0"\ |
| "storeargs=setenv bootargs "\ |
| "rootfstype=ramfs init=/init "\ |
| "console=ttyS0,115200 no_console_suspend "\ |
| "earlyprintk=aml-uart,0xc81004c0 "\ |
| "androidboot.selinux=disabled "\ |
| "logo=${display_layer},loaded,${fb_addr} "\ |
| "vout=${outputmode},enable "\ |
| "panel_type=${panel_type} hdmitx= "\ |
| "osd_reverse=${osd_reverse} video_reverse=${video_reverse} "\ |
| "jtag=${jtag} "\ |
| "ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 "\ |
| "androidboot.firstboot=${firstboot}; "\ |
| "setenv bootargs ${bootargs} androidboot.hardware=amlogic;"\ |
| "run cmdline_keys; "\ |
| "\0"\ |
| "switch_bootmode="\ |
| "get_rebootmode; "\ |
| "if test ${reboot_mode} = factory_reset; then "\ |
| "run recovery_from_flash; "\ |
| "else if test ${reboot_mode} = update; then "\ |
| "run update; "\ |
| "else if test ${reboot_mode} = cold_boot; then "\ |
| "run try_auto_burn; "\ |
| "fi; fi; fi; "\ |
| "\0" \ |
| "storeboot="\ |
| "if imgread kernel boot ${loadaddr}; then "\ |
| "bootm ${loadaddr}; "\ |
| "fi; "\ |
| "run update; "\ |
| "\0"\ |
| "factory_reset_poweroff_protect="\ |
| "echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache}; "\ |
| "if test ${wipe_data} = failed; then "\ |
| "run init_display; run storeargs; "\ |
| "if mmcinfo; then "\ |
| "run recovery_from_sdcard; "\ |
| "fi; "\ |
| "if usb start 0; then "\ |
| "run recovery_from_udisk; "\ |
| "fi; "\ |
| "run recovery_from_flash; "\ |
| "fi; "\ |
| "if test ${wipe_cache} = failed; then "\ |
| "run init_display; run storeargs; "\ |
| "if mmcinfo; then "\ |
| "run recovery_from_sdcard; "\ |
| "fi; "\ |
| "if usb start 0; then "\ |
| "run recovery_from_udisk; "\ |
| "fi; "\ |
| "run recovery_from_flash; "\ |
| "fi; "\ |
| "\0" \ |
| "update="\ |
| /*first usb burning, |
| second sdc_burn, |
| third ext-sd autoscr/recovery, |
| last udisk autoscr/recovery*/\ |
| "run usb_burning; "\ |
| "run sdc_burning; "\ |
| "led 0 toggle; "\ |
| "if mmcinfo; then "\ |
| "run recovery_from_sdcard; "\ |
| "fi; "\ |
| "if usb start 0; then "\ |
| "run recovery_from_udisk; "\ |
| "fi; "\ |
| "run recovery_from_flash; "\ |
| "\0"\ |
| "recovery_from_sdcard="\ |
| "setenv bootargs ${bootargs} aml_dt=${aml_dt};"\ |
| "if fatload mmc 0 ${loadaddr} aml_autoscript; then "\ |
| "autoscr ${loadaddr}; "\ |
| "fi; "\ |
| "if fatload mmc 0 ${loadaddr} recovery.img; then "\ |
| "if fatload mmc 0 ${dtb_mem_addr} dtb.img; then "\ |
| "echo sd dtb.img loaded; "\ |
| "fi; "\ |
| "wipeisb; "\ |
| "bootm ${loadaddr}; "\ |
| "fi; "\ |
| "\0"\ |
| "recovery_from_udisk="\ |
| "setenv bootargs ${bootargs} aml_dt=${aml_dt};"\ |
| "if fatload usb 0 ${loadaddr} aml_autoscript; then "\ |
| "autoscr ${loadaddr}; "\ |
| "fi; "\ |
| "if fatload usb 0 ${loadaddr} recovery.img; then "\ |
| "if fatload usb 0 ${dtb_mem_addr} dtb.img; then "\ |
| "echo udisk dtb.img loaded; "\ |
| "fi; "\ |
| "wipeisb; "\ |
| "bootm ${loadaddr}; "\ |
| "fi; "\ |
| "\0"\ |
| "recovery_from_flash="\ |
| "setenv bootargs ${bootargs} aml_dt=${aml_dt};"\ |
| "if imgread kernel recovery ${loadaddr}; then "\ |
| "wipeisb; "\ |
| "bootm ${loadaddr}; "\ |
| "fi"\ |
| "\0"\ |
| "init_display="\ |
| "osd open; osd clear; "\ |
| "vout output ${outputmode}; "\ |
| "imgread pic logo bootup $loadaddr; "\ |
| "bmp display $bootup_offset; bmp scale"\ |
| "\0"\ |
| "cmdline_keys="\ |
| "if keyman init 0x1234; then "\ |
| "if keyman read usid ${loadaddr} str; then "\ |
| "setenv bootargs ${bootargs} "\ |
| "androidboot.serialno=${usid}; "\ |
| "setenv serial ${usid};"\ |
| "fi; "\ |
| "if keyman read mac ${loadaddr} str; then "\ |
| "setenv bootargs ${bootargs} "\ |
| "mac=${mac} androidboot.mac=${mac}; "\ |
| "fi; "\ |
| "if keyman read deviceid ${loadaddr} str; then "\ |
| "setenv bootargs ${bootargs} "\ |
| "androidboot.deviceid=${deviceid}; "\ |
| "fi; "\ |
| "fi; "\ |
| "\0"\ |
| "upgrade_key="\ |
| "if gpio input GPIOAO_3; then "\ |
| "echo detect upgrade key; sleep 5; run update; "\ |
| "fi; "\ |
| "\0"\ |
| |
| #define CONFIG_PREBOOT \ |
| "run factory_reset_poweroff_protect; "\ |
| "run upgrade_check; "\ |
| "run bootmode_check; "\ |
| "run init_display; "\ |
| "run storeargs; "\ |
| "run switch_bootmode;" |
| #define CONFIG_BOOTCOMMAND "run storeboot" |
| |
| //#define CONFIG_ENV_IS_NOWHERE 1 |
| #define CONFIG_ENV_SIZE (64*1024) |
| #define CONFIG_FIT 1 |
| #define CONFIG_OF_LIBFDT 1 |
| #define CONFIG_ANDROID_BOOT_IMAGE 1 |
| #define CONFIG_ANDROID_IMG 1 |
| #define CONFIG_SYS_BOOTM_LEN (64<<20) /* Increase max gunzip size*/ |
| |
| /* cpu */ |
| #define CONFIG_CPU_CLK 1536 //MHz. Range: 600-1800, should be multiple of 24 |
| |
| /* ddr */ |
| #define CONFIG_DDR_SIZE 2048 //MB |
| #define CONFIG_DDR_CLK 720 //MHz, Range: 384-1200, should be multiple of 24 |
| #define CONFIG_DDR_TYPE CONFIG_DDR_TYPE_DDR3 |
| /* DDR channel setting, please refer hardware design. |
| * CONFIG_DDR0_ONLY_32BIT : one channel 32bit |
| * CONFIG_DDR0_ONLY_16BIT : one channel 16bit |
| * CONFIG_DDR01_TWO_CHANNEL : two channels 32bit |
| * CONFIG_DDR01_TWO_CHANNEL_16BIT : two channels 16bit */ |
| #define CONFIG_DDR_CHANNEL_SET CONFIG_DDR01_TWO_CHANNEL |
| #define CONFIG_DDR_FULL_TEST 0 //1 for ddr full test |
| #define CONFIG_NR_DRAM_BANKS 1 |
| /* ddr power saving */ |
| #define CONFIG_DDR_ZQ_POWER_DOWN |
| #define CONFIG_DDR_POWER_DOWN_PHY_VREF |
| /* ddr detection */ |
| #define CONFIG_DDR_SIZE_AUTO_DETECT 1 //0:disable, 1:enable |
| /* ddr functions */ |
| #define CONFIG_CMD_DDR_D2PLL 0 //0:disable, 1:enable. d2pll cmd |
| #define CONFIG_CMD_DDR_TEST 0 //0:disable, 1:enable. ddrtest cmd |
| |
| /* storage: emmc/nand/sd */ |
| #define CONFIG_STORE_COMPATIBLE 1 |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_ENV_IS_IN_MMC 1 |
| #define CONFIG_SYS_MMC_ENV_DEV 1 |
| #define CONFIG_AML_SD_EMMC 1 |
| #ifdef CONFIG_AML_SD_EMMC |
| #define CONFIG_GENERIC_MMC 1 |
| #define CONFIG_CMD_MMC 1 |
| #define CONFIG_EMMC_DDR52_EN 0 |
| #define CONFIG_EMMC_DDR52_CLK 52000000 |
| #endif |
| #define CONFIG_AML_NAND 1 |
| #ifdef CONFIG_AML_NAND |
| #endif |
| #define CONFIG_PARTITIONS 1 |
| #define CONFIG_SYS_NO_FLASH 1 |
| |
| /*SPI*/ |
| #define CONFIG_AMLOGIC_SPI_FLASH 1 |
| #ifdef CONFIG_AMLOGIC_SPI_FLASH |
| #undef CONFIG_ENV_IS_NOWHERE |
| //#define CONFIG_SPI_BOOT 1 |
| #define CONFIG_SPI_FLASH_ATMEL |
| #define CONFIG_SPI_FLASH_EON |
| #define CONFIG_SPI_FLASH_MACRONIX |
| #define CONFIG_SPI_FLASH_SPANSION |
| #define CONFIG_SPI_FLASH_SST |
| #define CONFIG_SPI_FLASH_STMICRO |
| #define CONFIG_SPI_FLASH_WINBOND |
| #define CONFIG_SPI_FRAM_RAMTRON |
| #define CONFIG_SPI_M95XXX |
| //#define CONFIG_SPI_FLASH_GIGADEVICE |
| //#define CONFIG_SPI_FLASH_PMDEVICE |
| //#define CONFIG_SPI_NOR_SECURE_STORAGE |
| #define CONFIG_SPI_FLASH_ESMT |
| #define CONFIG_SPI_FLASH 1 |
| #define CONFIG_CMD_SF 1 |
| #ifdef CONFIG_SPI_BOOT |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_OFFSET 0x1f0000 |
| #endif |
| #endif |
| |
| |
| /* vpu */ |
| #define CONFIG_AML_VPU 1 |
| #define CONFIG_VPU_CLK_LEVEL_DFT 7 |
| |
| /* DISPLAY & HDMITX */ |
| //#define CONFIG_AML_HDMITX20 1 |
| #define CONFIG_AML_CANVAS 1 |
| #define CONFIG_AML_VOUT 1 |
| #define CONFIG_AML_OSD 1 |
| #define CONFIG_OSD_SCALE_ENABLE 1 |
| #define CONFIG_CMD_BMP 1 |
| |
| // #if defined(CONFIG_AML_VOUT) |
| // #define CONFIG_AML_CVBS 1 |
| // #endif |
| |
| #define CONFIG_AML_LCD 1 |
| #define CONFIG_AML_LCD_TV 1 |
| #define CONFIG_AML_LCD_TABLET 1 |
| |
| /* USB |
| * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard |
| * Enable CONFIG_MUSB_UDD for Device functionalities. |
| */ |
| /* #define CONFIG_MUSB_UDC 1 */ |
| #define CONFIG_CMD_USB 1 |
| #if defined(CONFIG_CMD_USB) |
| #define CONFIG_GXTVBB_XHCI_BASE 0xc9000000 |
| #define CONFIG_GXTVBB_USB_PHY2_BASE 0xd0078000 |
| #define CONFIG_GXTVBB_USB_PHY3_BASE 0xd0078080 |
| #define CONFIG_USB_STORAGE 1 |
| #define CONFIG_USB_XHCI 1 |
| #define CONFIG_USB_XHCI_AMLOGIC 1 |
| #endif //#if defined(CONFIG_CMD_USB) |
| //#define CONFIG_AML_TINY_USBTOOL 1 |
| #define CONFIG_AML_V2_FACTORY_BURN 1 |
| |
| /* net */ |
| #define CONFIG_CMD_NET 1 |
| #if defined(CONFIG_CMD_NET) |
| #define CONFIG_DESIGNWARE_ETH 1 |
| #define CONFIG_PHYLIB 1 |
| #define CONFIG_AML_PMU4 1 |
| #define CONFIG_NET_MULTI 1 |
| #define CONFIG_CMD_PING 1 |
| #define CONFIG_CMD_DHCP 1 |
| #define CONFIG_CMD_RARP 1 |
| #define CONFIG_HOSTNAME arm_gxtvbb |
| #define CONFIG_ETHADDR 00:15:18:01:81:31 /* Ethernet address */ |
| #define CONFIG_IPADDR 10.18.9.97 /* Our ip address */ |
| #define CONFIG_GATEWAYIP 10.18.9.1 /* Our getway ip address */ |
| #define CONFIG_SERVERIP 10.18.9.113 /* Tftp server ip address */ |
| #define CONFIG_NETMASK 255.255.255.0 |
| #endif /* (CONFIG_CMD_NET) */ |
| |
| /* other devices */ |
| #define CONFIG_EFUSE 1 |
| #define CONFIG_SYS_I2C_AML 1 |
| #define CONFIG_SYS_I2C_SPEED 400000 |
| |
| /* commands */ |
| #define CONFIG_CMD_CACHE 1 |
| #define CONFIG_CMD_BOOTI 1 |
| #define CONFIG_CMD_EFUSE 1 |
| #define CONFIG_CMD_I2C 1 |
| #define CONFIG_CMD_MEMORY 1 |
| #define CONFIG_CMD_FAT 1 |
| #define CONFIG_CMD_GPIO 1 |
| #define CONFIG_CMD_RUN |
| #define CONFIG_CMD_REBOOT 1 |
| #define CONFIG_CMD_JTAG 1 |
| |
| /*file system*/ |
| #define CONFIG_DOS_PARTITION 1 |
| #define CONFIG_AML_PARTITION 1 |
| #define CONFIG_MMC 1 |
| #define CONFIG_FS_FAT 1 |
| #define CONFIG_FS_EXT4 1 |
| #define CONFIG_LZO 1 |
| |
| /* Cache Definitions */ |
| //#define CONFIG_SYS_DCACHE_OFF |
| //#define CONFIG_SYS_ICACHE_OFF |
| |
| /* other functions */ |
| #define CONFIG_NEED_BL301 1 |
| #define CONFIG_NEED_BL32 1 |
| #define CONFIG_CMD_RSVMEM 1 |
| #define CONFIG_FIP_IMG_SUPPORT 1 |
| #define CONFIG_BOOTDELAY 1 //delay 1s |
| #define CONFIG_SYS_LONGHELP 1 |
| #define CONFIG_CMD_MISC 1 |
| #define CONFIG_CMD_CPU_TEMP 1 |
| #define CONFIG_SYS_MEM_TOP_HIDE 0x08000000 //hide 128MB for kernel reserve |
| |
| #define CONFIG_MULTI_DTB 1 |
| |
| /* ddr dump function defines */ |
| //#define CONFIG_SPL_DDR_DUMP 1 |
| #ifdef CONFIG_SPL_DDR_DUMP |
| #define CONFIG_SPL_DDR_DUMP_ADDR 0x01000000 |
| #define CONFIG_SPL_DDR_DUMP_SIZE 0x00200000 |
| #define CONFIG_SPL_DDR_DUMP_DEV_TYPE 0x4 //device type, 1:emmc, 4:sd |
| #define CONFIG_SPL_DDR_DUMP_DEV_OFFSET 0x40000000 //offset of store device |
| #define CONFIG_SPL_DDR_DUMP_FLAG 0x1 //flag write in sticky reg |
| #endif |
| |
| //support secure boot |
| #define CONFIG_AML_SECURE_UBOOT 1 |
| |
| #if defined(CONFIG_AML_SECURE_UBOOT) |
| |
| //for GXBB SRAM size limitation just disable NAND |
| //as the socket board default has no NAND |
| #undef CONFIG_AML_NAND |
| |
| //unify build for generate encrypted bootloader "u-boot.bin.encrypt" |
| #define CONFIG_AML_CRYPTO_UBOOT 1 |
| |
| //unify build for generate encrypted kernel image |
| //SRC : "board/amlogic/gxb_skt_v1/boot.img" |
| //DST : "fip/boot.img.encrypt" |
| //#define CONFIG_AML_CRYPTO_IMG 1 |
| |
| #endif //CONFIG_AML_SECURE_UBOOT |
| |
| #define CONFIG_SECURE_STORAGE 1 |
| |
| #endif |
| |
