| T1024 SoC Overview | |
| ------------------ | |
| The T1024/T1023 dual core and T1014/T1013 single core QorIQ communication processor | |
| combines two or one 64-bit Power Architecture e5500 core respectively with high | |
| performance datapath acceleration logic, and network peripheral bus interfaces | |
| required for networking and telecommunications. This processor can be used in | |
| applications such as enterprise WLAN access points, routers, switches, firewall | |
| and other packet processing intensive small enterprise and branch office appliances, | |
| and general-purpose embedded computing. Its high level of integration offers | |
| significant performance benefits and greatly helps to simplify board design. | |
| The T1024 SoC includes the following function and features: | |
| - two e5500 cores, each with a private 256 KB L2 cache | |
| - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant) | |
| - Three levels of instructions: User, supervisor, and hypervisor | |
| - Independent boot and reset | |
| - Secure boot capability | |
| - 256 KB shared L3 CoreNet platform cache (CPC) | |
| - Interconnect CoreNet platform | |
| - CoreNet coherency manager supporting coherent and noncoherent transactions | |
| with prioritization and bandwidth allocation amongst CoreNet endpoints | |
| - 150 Gbps coherent read bandwidth | |
| - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support | |
| - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: | |
| - Packet parsing, classification, and distribution | |
| - Queue management for scheduling, packet sequencing, and congestion management | |
| - Cryptography Acceleration (SEC 5.x) | |
| - IEEE 1588 support | |
| - Hardware buffer management for buffer allocation and deallocation | |
| - MACSEC on DPAA-based Ethernet ports | |
| - Ethernet interfaces | |
| - Four 1 Gbps Ethernet controllers | |
| - Parallel Ethernet interfaces | |
| - Two RGMII interfaces | |
| - High speed peripheral interfaces | |
| - Three PCI Express 2.0 controllers/ports running at up to 5 GHz | |
| - One SATA controller supporting 1.5 and 3.0 Gb/s operation | |
| - One QSGMII interface | |
| - Four SGMII interface supporting 1000 Mbps | |
| - Three SGMII interfaces supporting up to 2500 Mbps | |
| - 10GbE XFI or 10Base-KR interface | |
| - Additional peripheral interfaces | |
| - Two USB 2.0 controllers with integrated PHY | |
| - SD/eSDHC/eMMC | |
| - eSPI controller | |
| - Four I2C controllers | |
| - Four UARTs | |
| - Four GPIO controllers | |
| - Integrated flash controller (IFC) | |
| - LCD interface (DIU) with 12 bit dual data rate | |
| - Multicore programmable interrupt controller (PIC) | |
| - Two 8-channel DMA engines | |
| - Single source clocking implementation | |
| - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) | |
| - QUICC Engine block | |
| - 32-bit RISC controller for flexible support of the communications peripherals | |
| - Serial DMA channel for receive and transmit on all serial channels | |
| - Two universal communication controllers, supporting TDM, HDLC, and UART | |
| T1023 Personality | |
| ------------------ | |
| T1023 is a reduced personality of T1024 without QUICC Engine, DIU, and | |
| unavailable deep sleep. Rest of the blocks are almost same as T1024. | |
| Differences between T1024 and T1023 | |
| Feature T1024 T1023 | |
| QUICC Engine: yes no | |
| DIU: yes no | |
| Deep Sleep: yes no | |
| I2C controller: 4 3 | |
| DDR: 64-bit 32-bit | |
| IFC: 32-bit 28-bit | |
| T1024RDB board Overview | |
| ----------------------- | |
| - Ethernet | |
| - Two on-board 10M/100M/1G bps RGMII ethernet ports | |
| - One on-board 10G bps Base-T port. | |
| - DDR Memory | |
| - Supports 64-bit 4GB DDR3L DIMM | |
| - PCIe | |
| - One on-board PCIe slot. | |
| - Two on-board PCIe Mini-PCIe connectors. | |
| - IFC/Local Bus | |
| - NOR: 128MB 16-bit NOR Flash | |
| - NAND: 1GB 8-bit NAND flash | |
| - CPLD: for system controlling with programable header on-board | |
| - USB | |
| - Supports two USB 2.0 ports with integrated PHYs | |
| - Two type A ports with 5V@1.5A per port. | |
| - SDHC | |
| - one SD connector supporting 1.8V/3.3V via J53. | |
| - SPI | |
| - On-board 64MB SPI flash | |
| - Other | |
| - Two Serial ports | |
| - Four I2C ports | |
| Memory map on T1024RDB | |
| ---------------------- | |
| Start Address End Address Description Size | |
| 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB | |
| 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB | |
| 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB | |
| 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB | |
| 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB | |
| 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB | |
| 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB | |
| 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB | |
| 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB | |
| 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB | |
| 0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB | |
| 0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB | |
| 0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB | |
| 0x0_0000_0000 0x0_ffff_ffff DDR 4GB | |
| 128MB NOR Flash memory Map | |
| -------------------------- | |
| Start Address End Address Definition Max size | |
| 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB | |
| 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB | |
| 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB | |
| 0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB | |
| 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB | |
| 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB | |
| 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB | |
| 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB | |
| 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB | |
| 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB | |
| 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB | |
| 0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB | |
| 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB | |
| 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB | |
| 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB | |
| 0xE8000000 0xE801FFFF RCW (current bank) 128KB | |
| T1024 Clock frequency | |
| --------------------- | |
| BIN Core DDR Platform FMan | |
| Bin1: 1400MHz 1600MT/s 400MHz 700MHz | |
| Bin2: 1200MHz 1600MT/s 400MHz 600MHz | |
| Bin3: 1000MHz 1600MT/s 400MHz 500MHz | |
| Software configurations and board settings | |
| ------------------------------------------ | |
| 1. NOR boot: | |
| a. build NOR boot image | |
| $ make T1024RDB_defconfig | |
| $ make | |
| b. program u-boot.bin image to NOR flash | |
| => tftp 1000000 u-boot.bin | |
| => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize | |
| set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot | |
| Switching between default bank0 and alternate bank4 on NOR flash | |
| To change boot source to vbank4: | |
| via software: run command 'cpld reset altbank' in u-boot. | |
| via DIP-switch: set SW3[5:7] = '100' | |
| To change boot source to vbank0: | |
| via software: run command 'cpld reset' in u-boot. | |
| via DIP-Switch: set SW3[5:7] = '000' | |
| 2. NAND Boot: | |
| a. build PBL image for NAND boot | |
| $ make T1024RDB_NAND_defconfig | |
| $ make | |
| b. program u-boot-with-spl-pbl.bin to NAND flash | |
| => tftp 1000000 u-boot-with-spl-pbl.bin | |
| => nand erase 0 $filesize | |
| => nand write 1000000 0 $filesize | |
| set SW1[1:8] = '10001000', SW2[1] = '1', SW3[4] = '1' for NAND boot | |
| 3. SPI Boot: | |
| a. build PBL image for SPI boot | |
| $ make T1024RDB_SPIFLASH_defconfig | |
| $ make | |
| b. program u-boot-with-spl-pbl.bin to SPI flash | |
| => tftp 1000000 u-boot-with-spl-pbl.bin | |
| => sf probe 0 | |
| => sf erase 0 f0000 | |
| => sf write 1000000 0 $filesize | |
| set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot | |
| 4. SD Boot: | |
| a. build PBL image for SD boot | |
| $ make T1024RDB_SDCARD_defconfig | |
| $ make | |
| b. program u-boot-with-spl-pbl.bin to SD/MMC card | |
| => tftp 1000000 u-boot-with-spl-pbl.bin | |
| => mmc write 1000000 8 0x800 | |
| => tftp 1000000 fsl_fman_ucode_t1024_xx.bin | |
| => mmc write 1000000 0x820 80 | |
| set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot | |
| 2-stage NAND/SPI/SD boot loader | |
| ------------------------------- | |
| PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. | |
| SPL further initializes DDR using SPD and environment variables | |
| and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. | |
| Finally SPL transers control to u-boot for futher booting. | |
| SPL has following features: | |
| - Executes within 256K | |
| - No relocation required | |
| Run time view of SPL framework | |
| ------------------------------------------------- | |
| |Area | Address | | |
| ------------------------------------------------- | |
| |SecureBoot header | 0xFFFC0000 (32KB) | | |
| ------------------------------------------------- | |
| |GD, BD | 0xFFFC8000 (4KB) | | |
| ------------------------------------------------- | |
| |ENV | 0xFFFC9000 (8KB) | | |
| ------------------------------------------------- | |
| |HEAP | 0xFFFCB000 (30KB) | | |
| ------------------------------------------------- | |
| |STACK | 0xFFFD8000 (22KB) | | |
| ------------------------------------------------- | |
| |U-boot SPL | 0xFFFD8000 (160KB) | | |
| ------------------------------------------------- | |
| NAND Flash memory Map on T1024RDB | |
| ------------------------------------------------------------- | |
| Start End Definition Size | |
| 0x000000 0x0FFFFF u-boot 1MB(2 block) | |
| 0x100000 0x17FFFF u-boot env 512KB(1 block) | |
| 0x180000 0x1FFFFF FMAN Ucode 512KB(1 block) | |
| 0x200000 0x27FFFF QE Firmware 512KB(1 block) | |
| SD Card memory Map on T1024RDB | |
| ---------------------------------------------------- | |
| Block #blocks Definition Size | |
| 0x008 2048 u-boot img 1MB | |
| 0x800 0016 u-boot env 8KB | |
| 0x820 0256 FMAN Ucode 128KB | |
| 0x920 0256 QE Firmware 128KB | |
| SPI Flash memory Map on T1024RDB | |
| ---------------------------------------------------- | |
| Start End Definition Size | |
| 0x000000 0x0FFFFF u-boot img 1MB | |
| 0x100000 0x101FFF u-boot env 8KB | |
| 0x110000 0x12FFFF FMAN Ucode 128KB | |
| 0x130000 0x14FFFF QE Firmware 128KB | |
| For more details, please refer to T1024RDB Reference Manual and access | |
| website www.freescale.com and Freescale QorIQ SDK Infocenter document. |