| Overview | |
| -------- | |
| The T1040QDS is a Freescale reference board that hosts the T1040 SoC | |
| (and variants). | |
| T1040 SoC Overview | |
| ------------------ | |
| The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA | |
| processor cores with high-performance data path acceleration architecture | |
| and network peripheral interfaces required for networking & telecommunications. | |
| The T1040/T1042 SoC includes the following function and features: | |
| - Four e5500 cores, each with a private 256 KB L2 cache | |
| - 256 KB shared L3 CoreNet platform cache (CPC) | |
| - Interconnect CoreNet platform | |
| - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving | |
| support | |
| - Data Path Acceleration Architecture (DPAA) incorporating acceleration | |
| for the following functions: | |
| - Packet parsing, classification, and distribution | |
| - Queue management for scheduling, packet sequencing, and congestion | |
| management | |
| - Cryptography Acceleration (SEC 5.0) | |
| - RegEx Pattern Matching Acceleration (PME 2.2) | |
| - IEEE Std 1588 support | |
| - Hardware buffer management for buffer allocation and deallocation | |
| - Ethernet interfaces | |
| - Integrated 8-port Gigabit Ethernet switch (T1040 only) | |
| - Four 1 Gbps Ethernet controllers | |
| - Two RGMII interfaces or one RGMII and one MII interfaces | |
| - High speed peripheral interfaces | |
| - Four PCI Express 2.0 controllers running at up to 5 GHz | |
| - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation | |
| - Upto two QSGMII interface | |
| - Upto six SGMII interface supporting 1000 Mbps | |
| - One SGMII interface supporting upto 2500 Mbps | |
| - Additional peripheral interfaces | |
| - Two USB 2.0 controllers with integrated PHY | |
| - SD/eSDHC/eMMC | |
| - eSPI controller | |
| - Four I2C controllers | |
| - Four UARTs | |
| - Four GPIO controllers | |
| - Integrated flash controller (IFC) | |
| - LCD and HDMI interface (DIU) with 12 bit dual data rate | |
| - TDM interface | |
| - Multicore programmable interrupt controller (PIC) | |
| - Two 8-channel DMA engines | |
| - Single source clocking implementation | |
| - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) | |
| T1040QDS board Overview | |
| ----------------------- | |
| - SERDES Connections, 8 lanes supporting: | |
| — PCI Express: supporting Gen 1 and Gen 2; | |
| — SGMII | |
| — QSGMII | |
| — SATA 2.0 | |
| — Aurora debug with dedicated connectors (T1040 only) | |
| - DDR Controller | |
| - Supports rates of up to 1600 MHz data-rate | |
| - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. | |
| -IFC/Local Bus | |
| - NAND flash: 8-bit, async, up to 2GB. | |
| - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB | |
| - GASIC: Simple (minimal) target within Qixis FPGA | |
| - PromJET rapid memory download support | |
| - Ethernet | |
| - Two on-board RGMII 10/100/1G ethernet ports. | |
| - PHY #0 remains powered up during deep-sleep (T1040 only) | |
| - QIXIS System Logic FPGA | |
| - Clocks | |
| - System and DDR clock (SYSCLK, “DDRCLK”) | |
| - SERDES clocks | |
| - Power Supplies | |
| - Video | |
| - DIU supports video at up to 1280x1024x32bpp | |
| - USB | |
| - Supports two USB 2.0 ports with integrated PHYs | |
| — Two type A ports with 5V@1.5A per port. | |
| — Second port can be converted to OTG mini-AB | |
| - SDHC | |
| - SDHC port connects directly to an adapter card slot, featuring: | |
| - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC | |
| — Supporting eMMC memory devices | |
| - SPI | |
| - On-board support of 3 different devices and sizes | |
| - Other IO | |
| - Two Serial ports | |
| - ProfiBus port | |
| - Four I2C ports | |
| Memory map on T1040QDS | |
| ---------------------- | |
| The addresses in brackets are physical addresses. | |
| Start Address End Address Description Size | |
| 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB | |
| 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB | |
| 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB | |
| 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB | |
| 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB | |
| 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB | |
| 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB | |
| 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB | |
| 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB | |
| 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB | |
| 0xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB | |
| 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB | |
| 0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB | |
| 0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB | |
| 0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB | |
| 0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB | |
| 0x0_0000_0000 0x0_ffff_ffff DDR 2GB | |
| NOR Flash memory Map on T1040QDS | |
| -------------------------------- | |
| Start End Definition Size | |
| 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB | |
| 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB | |
| 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB | |
| 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB | |
| 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB | |
| 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB | |
| 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB | |
| 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB | |
| 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB | |
| 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB | |
| 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB | |
| 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB | |
| 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB | |
| 0xE8000000 0xE801FFFF RCW (current bank) 128KB | |
| Various Software configurations/environment variables/commands | |
| -------------------------------------------------------------- | |
| The below commands apply to T1040QDS | |
| 1. U-boot environment variable hwconfig | |
| The default hwconfig is: | |
| hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: | |
| dr_mode=host,phy_type=utmi | |
| Note: For USB gadget set "dr_mode=peripheral" | |
| 2. FMAN Ucode versions | |
| fsl_fman_ucode_t1040.bin | |
| 3. Switching to alternate bank | |
| Commands for switching to alternate bank. | |
| 1. To change from vbank0 to vbank4 | |
| => qixis_reset altbank (it will boot using vbank4) | |
| 2.To change from vbank4 to vbank0 | |
| => qixis reset (it will boot using vbank0) | |
| T1040 Personality | |
| -------------------- | |
| T1022 Personality | |
| -------------------- | |
| T1022 is a reduced personality of T1040 with less core/clusters. | |
| T1042 Personality | |
| -------------------- | |
| T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit | |
| Ethernet switch. Rest of the blocks are same as T1040 |